A
-
AA2024-O aluminum alloy
Effect of Pin Geometry and Tool Rotational Speed on Microstructure and Mechanical Properties of Friction Stir Spot Welded Joints in AA2024-O Aluminum Alloy [Volume 34, Issue 8, 2021, Pages 1949-1960]
-
AA 5052 aluminum alloy
Effects of cold rolling and annealing time on fatigue resistance of AA5052 aluminum alloy [Volume 34, Issue 9, 2021, Pages 2189-2197]
-
AA6063 Alloy Tube
Multi-objective Optimization of HMGF Process Parameters for Manufacturing AA6063 Stepped Tubes using FEM-RSM [Volume 34, Issue 5, 2021, Pages 1305-1312]
-
AA8111 aluminium alloy
Numerical analyses of Manufacturing of an AA8111 Pin-shaped Bipolar Plate by Hot Metal Gas Forming [Volume 34, Issue 8, 2021, Pages 1994-2001]
-
Abandoned projects
Management of Abandoned Construction Projects in Iraq Using BIM Technology [Volume 34, Issue 3, 2021, Pages 644-649]
-
ABAQUS
A Numerical Study of the Effect of Tunneling on Surface Settlement and Existing Buildings [Volume 34, Issue 5, 2021, Pages 1085-1093]
-
Accelerated aging
Mechanical Properties of Ultra-high Performance Concrete Reinforced by Glass Fibers under Accelerated Aging [Volume 34, Issue 5, 2021, Pages 1074-1084]
-
AC/DC microgrid
Stability Analysis of AC/DC Microgrids in Island Mode [Volume 34, Issue 7, 2021, Pages 1750-1765]
-
Action Tensile Strength
Strength Capacity Cracks Propagations Deflection and Tensile Enhancement of Reinforced Concrete Beams Warped by Glass Fiber Reinforced Polymer Strips [Volume 34, Issue 5, 2021, Pages 1094-1104]
-
Active rotary oscillation
Numerical Study on Vibration Attenuation of Cylinder using Active Rotary Oscillating Controller [Volume 34, Issue 1, 2021, Pages 202-211]
-
Actuator Faults
Actuator Fault Detection and Isolation for Helicopter Unmanned Arial Vehicle in the Present of Disturbance [Volume 34, Issue 3, 2021, Pages 676-681]
-
Adaptive averaging
A Game-Theoretic Approach for Robust Federated Learning [Volume 34, Issue 4, 2021, Pages 832-842]
-
Adaptive control
A New Consensus-based Distributed Adaptive Control for Islanded Microgrids [Volume 34, Issue 7, 2021, Pages 1725-1735]
-
Adaptive lookup table control
An Improved Hierarchical Control Structure for Robust Microgrid Operation and Seamless Mode Transfer under Linear and Nonlinear Loads conditions [Volume 34, Issue 9, 2021, Pages 2167-2179]
-
Additive Manufacturing
Fused Deposition Modeling of an Aircraft Wing using Industrial Robot with Non-linear Tool Path Generation [Volume 34, Issue 1, 2021, Pages 272-282]
-
Adhesive Joint
Enhancement of Stiffness in GFRP Beams by Glass Reinforcement [Volume 34, Issue 3, 2021, Pages 615-620]
-
Adhesively Bonded Joints
Analytical Stress Analysis in Single-lap Adhesive Joints under Buckling [Volume 34, Issue 2, 2021, Pages 313-318]
-
Adomian decomposition method
The application of analytical methods in the investigation effects of Magnetic parameter and Brownian motion on the fluid flow between two equal plates [Volume 34, Issue 10, 2021, Pages 2341-2350]
-
Adsorption Isotherms
Efficient Removal of Copper Ion from Aqueous Solution using Crosslinked Chitosan Grafted with Polyaniline [Volume 34, Issue 2, 2021, Pages 305-312]
-
Adult Occupant
Effects of Deceleration on Secondary Collisions between Adult Occupants and the Vehicle in Frontal Crash Accidents [Volume 34, Issue 12, 2021, Pages 2658-2664]
-
Advanced Ceramic
Effect of Additional Zirconia on Fracture Mechanics of Bioactive Glass-ceramics Using Digital Image Correlation [Volume 34, Issue 9, 2021, Pages 2053-2059]
-
Advanced oxidation
Photo-degradation of P-Nitro Toluene Using Modified Bentonite Based Nano-TiO2 Photocatalyst in Aqueous Solution [Volume 34, Issue 4, 2021, Pages 756-762]
-
Aero-dynamical force
Effects of Road Roughness, Aerodynamics, and Weather Conditions on Automotive Wheel Force [Volume 34, Issue 2, 2021, Pages 536-546]
-
Aggregate
Utilizing the Modified Popovics Model in study of effect of water to cement ratio, size and shape of aggregate in concrete behavior [Volume 34, Issue 2, 2021, Pages 393-402]
-
Agricultural waste
Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
-
Air Dense Medium Fluidized Bed
Effect of Critical Variables on Air Dense Medium Fluidized Bed Coal Drying Efficiency and Kinetics [Volume 34, Issue 5, 2021, Pages 1362-1370]
-
Air pressure
Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
-
Air Temperature
Effects of Road Roughness, Aerodynamics, and Weather Conditions on Automotive Wheel Force [Volume 34, Issue 2, 2021, Pages 536-546]
-
Alkaline Extraction
Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]
-
Allocation
Voltage Stability Improvement in Optimal Placement of Voltage Regulators and Capacitor Banks Based on FSM and MMOPSO Approach [Volume 34, Issue 4, 2021, Pages 881-890]
-
Allocation problem
A Bi-level Programming Approach for Pre-positioning Emergency Warehouses [Volume 34, Issue 1, 2021, Pages 128-139]
-
Alloys
The Prediction of Stress and Strain Behaviors in Composite Gears using FEM [Volume 34, Issue 2, 2021, Pages 556-563]
-
All Pass Network
Dual Output Voltage Differencing Buffered Amplifier Based Active -C Multiphase Sinusoidal Oscillator [Volume 34, Issue 6, 2021, Pages 1438-1444]
-
Al-Najaf City
Numerical Evaluation of Slope Stability for Construction and Seismic Loads: Case Study [Volume 34, Issue 7, 2021, Pages 1602-1610]
-
Alternative Load Path Method
Evaluating the effect of Buckling-Restrained Braces in Steel Buildings against Progressive failure using Different Simulation Strategies [Volume 34, Issue 10, 2021, Pages 2248-2258]
-
Aluminium oxide nanoparticles
Durability and Mechanical Properties of Self-compacting Concretes with Combined Use of Aluminium Oxide Nanoparticles and Glass Fiber [Volume 34, Issue 1, 2021, Pages 26-38]
-
Aluminum-Copper Alloys
Influence of Mould Thickness on Microstructure, Hardness and Wear of AL-Cu Cast Alloys [Volume 34, Issue 8, 2021, Pages 2021-2027]
-
Aluminum Oxide Nanoparticles
Retrofitting of RC Beams using Reinforced Self-compacting Concrete Jackets Containing Aluminum Oxide Nanoparticles [Volume 34, Issue 5, 2021, Pages 1195-1212]
-
Aluminum Oxide Nanoparticles
Evaluation of the Combined Use of Waste Paper Sludge Ash and Nanomaterials on Mechanical Properties and Durability of High Strength Concretes [Volume 34, Issue 7, 2021, Pages 1653-1666]
-
Ambient Curing
Parametric Effects on Slump and Compressive Strength Properties of Geopolymer Concrete using Taguchi Method [Volume 34, Issue 3, 2021, Pages 629-635]
-
Ammonium Hydroxide
Determining the Optimal Maintenance Strategy for Ammonium Hydroxide Production Unit Using Risk-Based Inspection and Analytic Hierarchy Process [Volume 34, Issue 9, 2021, Pages 2087-2096]
-
Analysis
Orthotropic Coefficients and Continuity Factors of Reinforced Concrete Slabs Supported on 3-sides [Volume 34, Issue 2, 2021, Pages 375-381]
-
Analytic Hierarchy Process
Determining the Optimal Maintenance Strategy for Ammonium Hydroxide Production Unit Using Risk-Based Inspection and Analytic Hierarchy Process [Volume 34, Issue 9, 2021, Pages 2087-2096]
-
Analyzing vibration
Analyzing Vibration as a Useful Domain for Getting Bearing Fault Signals in Induction Motors [Volume 34, Issue 8, 2021, Pages 2010-2020]
-
ANFIS
Adpative Neuro-Fuzzy Inference System Estimation Propofol dose in the induction phase during anesthesia; case study [Volume 34, Issue 9, 2021, Pages 2148-2156]
-
Angle-ply
Study of the Fracture Behavior under the Effect of Cross-ply and Angle-ply Arrangement of FRP Composite Laminate Subjected to Central Circular Cut-out with Mechanical and Thermal Loading Conditions [Volume 34, Issue 6, 2021, Pages 1523-1529]
-
Angular contact ball bearing
Numerical Investigation of the Heat-Fluid Characteristic inside High-Speed Angular Contact Ball Bearing Lubricated with Grease [Volume 34, Issue 5, 2021, Pages 1313-1320]
-
Anhedral Angle
Dynamic Response Analysis of a High Glide Ratio Parachute System [Volume 34, Issue 1, 2021, Pages 195-201]
-
Anisotropic Damage
Reliability Analysis of Notched Plates under Anisotropic Damage Based on Uniaxial Loading Using Continuum Damage Mechanics Approach [Volume 34, Issue 1, 2021, Pages 253-262]
-
Annealing
Effects of cold rolling and annealing time on fatigue resistance of AA5052 aluminum alloy [Volume 34, Issue 9, 2021, Pages 2189-2197]
-
Ansys
Strength Capacity Cracks Propagations Deflection and Tensile Enhancement of Reinforced Concrete Beams Warped by Glass Fiber Reinforced Polymer Strips [Volume 34, Issue 5, 2021, Pages 1094-1104]
-
Anticorrosion paint
A Preliminary Field Study of Antifouling Paint Perfomance After Short Exposure in Mandara Bali, Indonesia [Volume 34, Issue 4, 2021, Pages 976-986]
-
Antifouling paint
A Preliminary Field Study of Antifouling Paint Perfomance After Short Exposure in Mandara Bali, Indonesia [Volume 34, Issue 4, 2021, Pages 976-986]
-
Antimony
Removing of Sb and As from Electrolyte in Copper Electrorefining Process: A Green Approach [Volume 34, Issue 3, 2021, Pages 700-705]
-
Antipyrogen
Korkinsk Brown Coal Open Pit as a Case Study of Endogenous Fires [Volume 34, Issue 1, 2021, Pages 293-304]
-
Aramid Fiber polymer
Experimental Comparison of Different Types of FRP Wrapping in Repairing of RC Deep Beams with Circular Openings [Volume 34, Issue 8, 2021, Pages 1961-1973]
-
Arch Dams
Experimental and Nonlinear Analysis of Cracking in Concrete Arch Dams Due to Seismic Uplift Pressure Variations [Volume 34, Issue 5, 2021, Pages 1156-1166]
-
Arduino
Operating Wheelchair Using Flex Sensor [Volume 34, Issue 7, 2021, Pages 1703-1709]
-
Arrival of New Jobs
Reactive Scheduling Addressing Unexpected Disturbance in Cellular Manufacturing Systems [Volume 34, Issue 1, 2021, Pages 162-170]
-
Arsenic Copper
Removing of Sb and As from Electrolyte in Copper Electrorefining Process: A Green Approach [Volume 34, Issue 3, 2021, Pages 700-705]
-
Arthrospira Maxima
Nitrogen Starvation Effect Versus its Excess on the Performance of Arthrospira maxima in Zarrouk’s Medium [Volume 34, Issue 7, 2021, Pages 1557-1568]
-
Artificial intelligence
Optimization of Travelling Salesman Problem on Single Valued Triangular Neutrosophic Number using Dhouib-Matrix-TSP1 Heuristic [Volume 34, Issue 12, 2021, Pages 2642-2647]
-
Artificial Neural Network
A Clustering-Based Approach for Features Extraction in Spectro-Temporal Domain Using Artificial Neural Network [Volume 34, Issue 2, 2021, Pages 452-457]
-
Artificial Neural Network
Application of Artificial Neural Network and Multi-magnetic NDE Methods to Determine Mechanical Properties of Plain Carbon Steels Subjected to Tempering Treatment [Volume 34, Issue 4, 2021, Pages 919-927]
-
Artificial Neural Network
A Signal Processing Method for Text Language Identification [Volume 34, Issue 6, 2021, Pages 1413-1418]
-
Artificial Neural Network
A neural network approach to estimate non-Newtonian behavior of nanofluid phase change material containing mesoporous silica particles [Volume 34, Issue 8, 2021, Pages 1974-1981]
-
Artificial Neural Networks
Optimization of Thermal Decomposition Conditions of Bone to Achieve the Highest Percentage of Crystalline Phase in Bone Char using Gene Expression Programming and Artificial Neural Network [Volume 34, Issue 1, 2021, Pages 184-194]
-
Artificial Neural Networks
Straightforward Prediction for Responses of the Concrete Shear Wall Buildings Subject to Ground Motions Using Machine Learning Algorithms [Volume 34, Issue 7, 2021, Pages 1586-1601]
-
Aspect ratio
Large-Scale Experimental Study on Collapsible Soil Improvement Using Encased Stone Columns [Volume 34, Issue 5, 2021, Pages 1145-1155]
-
ASR problem
High-contribution of strip glass waste in buckling-strengthening of slim GLARC columns at once avoiding ASR deterioration problems in concrete materials [Volume 34, Issue 11, 2021, Pages 2452-2466]
-
Auditory Model
A Clustering-Based Approach for Features Extraction in Spectro-Temporal Domain Using Artificial Neural Network [Volume 34, Issue 2, 2021, Pages 452-457]
-
Augmented reality
Semi-Augmented Reality, a Novel Approach to Improve Customer Safety in the Pre-sale Process of Under Construction Buildings [Volume 34, Issue 10, 2021, Pages 2198-2205]
-
Austenitic stainless steel
Direct Drive Friction Welding Joint Strength of AISI 304 [Volume 34, Issue 3, 2021, Pages 714-720]
-
Average Run Length
Designing Exponentially Weighted Moving Average Control Charts under Failure Censoring Reliability Tests [Volume 34, Issue 11, 2021, Pages 2398-2407]
-
Axial Compression
Axial Compression Performance of Square Tube Filled with Foam Aluminum [Volume 34, Issue 5, 2021, Pages 1336-1344]
-
Azo dye
Synergetic photocatalytic and adsorptive removals of metanil yellow using TiO2/grass-derived cellulose/chitosan (TiO2/GC/CH) film composite [Volume 34, Issue 8, 2021, Pages 1827-1836]
B
-
Backup Facilities
A Blood Supply Chain Network with Backup Facilities Considering Blood Groups and Expiration Date: A Real-world Application [Volume 34, Issue 2, 2021, Pages 470-479]
-
Bandwidth Adjustment
Objective Functions for the Optimization of an Ultra Wideband Antenna [Volume 34, Issue 7, 2021, Pages 1743-1749]
-
Bandwidth management
Bandwidth Management with Congestion Control Approach and Fuzzy Logic [Volume 34, Issue 4, 2021, Pages 891-900]
-
Barium ferrite
Electromagnetic Wave Absorption Properties of Barium Ferrite/Reduced Graphene Oxide Nanocomposites [Volume 34, Issue 6, 2021, Pages 1503-1511]
-
Base Layer
Engineering properties of soil stabilized with cement and fly ash for sustainable road construction [Volume 34, Issue 12, 2021, Pages 2665-2671]
-
Beam
Strengthening of RC Beams Using SCC Jacket Consisting of Glass Fiber and Fiber-Silica Fume Composite Gel [Volume 34, Issue 8, 2021, Pages 1923-1939]
-
Bearing Capacity
Physical Modelling of a Strip Footing on a Geosynthetic Reinforced Soil Wall Containing Tire Shred Subjected to Monotonic and Cyclic Loading [Volume 34, Issue 10, 2021, Pages 2266-2279]
-
Bearing fault
Analyzing Vibration as a Useful Domain for Getting Bearing Fault Signals in Induction Motors [Volume 34, Issue 8, 2021, Pages 2010-2020]
-
Bending loading
Ratcheting Analysis of Steel Plate under Cycling Loading using Dynamic Relaxation Method Experimentally Validated [Volume 34, Issue 6, 2021, Pages 1530-1536]
-
Bending Tests
Enhancement of Stiffness in GFRP Beams by Glass Reinforcement [Volume 34, Issue 3, 2021, Pages 615-620]
-
Bentonite
Photo-degradation of P-Nitro Toluene Using Modified Bentonite Based Nano-TiO2 Photocatalyst in Aqueous Solution [Volume 34, Issue 4, 2021, Pages 756-762]
-
Bidirectional Counter
Designing Bi-directional Counters Using Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 4, 2021, Pages 901-907]
-
Biker
Detection of Bikers without Helmet Using Image Texture and Shape Analysis [Volume 34, Issue 3, 2021, Pages 650-655]
-
BIM
Management of Abandoned Construction Projects in Iraq Using BIM Technology [Volume 34, Issue 3, 2021, Pages 644-649]
-
BIM benefits
The Effects of BIM Maturity Level on the 4D Simulation Performance: An Empirical Study [Volume 34, Issue 3, 2021, Pages 606-614]
-
Binary-coded-decimal
Reducing Quantum Cost for Reversible Realization of Densely-packed-decimal Converters [Volume 34, Issue 5, 2021, Pages 1284-1289]
-
Bioactive nanocomposites
Titanium Dioxide Nanotubes Incorporated Bioactive Glass Nanocomposites: Synthesis, Characterization, Bioactivity Evaluation and Drug Loading [Volume 34, Issue 1, 2021, Pages 1-9]
-
Bioactivity evaluation
Titanium Dioxide Nanotubes Incorporated Bioactive Glass Nanocomposites: Synthesis, Characterization, Bioactivity Evaluation and Drug Loading [Volume 34, Issue 1, 2021, Pages 1-9]
-
Bi-objective mathematical model
Developing a Bi-objective Mathematical Model to Design the Fish Closed-loop Supply Chain [Volume 34, Issue 5, 2021, Pages 1257-1268]
-
Bi-objective Optimization
A Bi-objective Robust Optimization Model for an Integrated Production-distribution Problem of Perishable Goods with Demand Improvement Strategies: A Case Study [Volume 34, Issue 7, 2021, Pages 1766-1777]
-
Biocompatibility
Fabrication and evaluation of controlled release of Doxorubicin loaded UiO-66-NH2 metal organic frameworks [Volume 34, Issue 8, 2021, Pages 1874-1881]
-
Biomaterials
Utilization of Gene Expression Programming for Modeling of Mechanical Performance of Titanium/Carbonated Hydroxyapatite Nanobiocomposites: The Combination of Artificial Intelligence and Material Science [Volume 34, Issue 4, 2021, Pages 948-955]
-
Biomedical applications
Effect of Silver Clusters Deposition on Wettability and Optical Properties of Diamond-like Carbon Films [Volume 34, Issue 3, 2021, Pages 706-713]
-
Bipolar Plates
Numerical analyses of Manufacturing of an AA8111 Pin-shaped Bipolar Plate by Hot Metal Gas Forming [Volume 34, Issue 8, 2021, Pages 1994-2001]
-
Bit - rock interaction
Non-linear Axial Vibrations of Composite Drill Strings Considering Interaction of Roller Cone Bit and Polycrystalline Diamond Compact Bit with Rock [Volume 34, Issue 4, 2021, Pages 1016-1023]
-
Black cotton soil
An Experimental Investigation on Black Cotton Soil using Terrazyme [Volume 34, Issue 8, 2021, Pages 1837-1844]
-
Blast load
Blast Demand Estimation of RC-Moment-Resisting Frames using a Proposed Multi-modal Adaptive Pushover Analysis Procedure [Volume 34, Issue 1, 2021, Pages 46-55]
-
Boiler Temperature
A New Recurrent Radial Basis Function Network-based Model Predictive Control for a Power Plant Boiler Temperature Control [Volume 34, Issue 3, 2021, Pages 667-675]
-
Bond strength
Study of Bond Strength of Plain Surface Wave Type Configuration Rebars with Concrete: A Comparative Study [Volume 34, Issue 2, 2021, Pages 326-335]
-
Bone char
Optimization of Thermal Decomposition Conditions of Bone to Achieve the Highest Percentage of Crystalline Phase in Bone Char using Gene Expression Programming and Artificial Neural Network [Volume 34, Issue 1, 2021, Pages 184-194]
-
Bone Drilling Process
Statistical Modeling, Optimization and Sensitivity Analysis of Tool’s Geometrical Parameters on Process Force in Automatic Cortical Bone Drilling Process [Volume 34, Issue 2, 2021, Pages 528-535]
-
Boog
An Application of Fuzzy-VIKOR Method in Environmental Impact Assessment of the Boog Mine Southeast of Iran [Volume 34, Issue 6, 2021, Pages 1545-1556]
-
Bouc-Wen Model
The Effects of Mathematical Modelling of Magneto-rheological Dampers on Its Control Performance: A Comparative Study Between the Modified Bouc-Wen and the Maxwell Nonlinear Slider Hysteretic Models [Volume 34, Issue 5, 2021, Pages 1105-1117]
-
Brake materials
Dry sliding behavior of carbon-based brake pad materials [Volume 34, Issue 11, 2021, Pages 2517-2524]
-
Breakdown
Kudryavy Volcano Crater Thick Rocks Electrical Breakdown Study in 50 Hz Electromagnetic Field [Volume 34, Issue 5, 2021, Pages 1371-1380]
-
Brownian motion
The application of analytical methods in the investigation effects of Magnetic parameter and Brownian motion on the fluid flow between two equal plates [Volume 34, Issue 10, 2021, Pages 2341-2350]
-
Brushless Cascade Doubly-Fed Induction Generator
A Novel Model Predictive Voltage Control of Brushless Cascade Doubly-Fed Induction Generator in Stand-Alone Power Generation System [Volume 34, Issue 5, 2021, Pages 1239-1249]
-
Buckling load
Analytical Stress Analysis in Single-lap Adhesive Joints under Buckling [Volume 34, Issue 2, 2021, Pages 313-318]
-
Buckling-restrained brace
Evaluating the effect of Buckling-Restrained Braces in Steel Buildings against Progressive failure using Different Simulation Strategies [Volume 34, Issue 10, 2021, Pages 2248-2258]
-
Building construction
Semi-Augmented Reality, a Novel Approach to Improve Customer Safety in the Pre-sale Process of Under Construction Buildings [Volume 34, Issue 10, 2021, Pages 2198-2205]
-
Building Information Modelling
The Effects of BIM Maturity Level on the 4D Simulation Performance: An Empirical Study [Volume 34, Issue 3, 2021, Pages 606-614]
-
Burden Thickness
New Model of Burden Thickness Estimation for Blasting of Open Pit Mines [Volume 34, Issue 5, 2021, Pages 1381-1389]
-
Burr formation
Effect of Cutting Environment and Swept Angle Selection in Milling Operation [Volume 34, Issue 12, 2021, Pages 2578-2584]
-
By-products
Parametric Effects on Slump and Compressive Strength Properties of Geopolymer Concrete using Taguchi Method [Volume 34, Issue 3, 2021, Pages 629-635]
C
-
Calcined bentonite
Optimization of Calcined Bentonite Clay Utilization in Cement Mortar using Response Surface Methodology [Volume 34, Issue 7, 2021, Pages 1623-1631]
-
Calcium Chloride
Influence of Chemical Admixtures on Geotechnical Properties of Expansive Soil [Volume 34, Issue 1, 2021, Pages 19-25]
-
Capacitor bank
Voltage Stability Improvement in Optimal Placement of Voltage Regulators and Capacitor Banks Based on FSM and MMOPSO Approach [Volume 34, Issue 4, 2021, Pages 881-890]
-
Carbon Fiber Polymer
Experimental Comparison of Different Types of FRP Wrapping in Repairing of RC Deep Beams with Circular Openings [Volume 34, Issue 8, 2021, Pages 1961-1973]
-
Carbon Fiber Reinforced Polymers
Behavior and Strength of Steel Fiber Reinforced Self-compacting Concrete Columns Wrapped by Carbon Fiber Reinforced Polymers Strips [Volume 34, Issue 2, 2021, Pages 382-392]
-
Carbon materials
Analysis on Effect of Fullerene Soot on the Chemical and Physical Properties of Cement Mixtures [Volume 34, Issue 10, 2021, Pages 2313-2318]
-
Carbon Nanotube Field Effect Transistor
A Compact Model of Gate Capacitance in Ballistic Gate-All-Around Carbon Nanotube Field Effect Transistors [Volume 34, Issue 7, 2021, Pages 1718-1724]
-
Carbon Nanotube Field Effect Transistors
Carbon Nanotube Field Effect Transistors Based Digitally Reconfigurable Single Differential Voltage Current Conveyor based Analog Biquadratic Multifunctional Filter at 32nm Technology Node [Volume 34, Issue 11, 2021, Pages 2424-2432]
-
Carbon nanotubes
Mass Production and Growth Mechanism of Carbon Nanotubes in Optimized Mechanothermal Method [Volume 34, Issue 10, 2021, Pages 2332-2340]
-
Carry select adder
An Enhanced Self-checking Carry Select Adder Utilizing the Concept of Self-checking Full Adder [Volume 34, Issue 2, 2021, Pages 433-442]
-
Casting anode
Modeling and Optimization of Charge Materials Ranges in Converter Furnace with Enhanced Passivation Time in Copper Electrorefining Process: A Mixture Design Approach [Volume 34, Issue 4, 2021, Pages 966-975]
-
Cellulose Nano-fiber
Experimental Study on Mechanical, Thermal and Antibacterial Properties of Hybrid Nanocomposites of PLA/CNF/Ag [Volume 34, Issue 2, 2021, Pages 500-507]
-
Central Composite Design Approach
Optimization of Green Technique Develop for Europium (III) Extraction by using Phosphonium Ionic Liquid and Central Composite Design Approach [Volume 34, Issue 2, 2021, Pages 508-516]
-
CFD
Investigating the Performance of CO Boiler Burners in the RFCC Unit with CFD Simulation [Volume 34, Issue 3, 2021, Pages 587-597]
-
Chaotic Function
Novel Particle Swarm Optimization Algorithm Based on President Election: Applied to a Renewable Hybrid Power System Controller [Volume 34, Issue 1, 2021, Pages 97-109]
-
Characteristics
Kudryavy Volcano Crater Thick Rocks Electrical Breakdown Study in 50 Hz Electromagnetic Field [Volume 34, Issue 5, 2021, Pages 1371-1380]
-
Characteristics-based method
Sensitivity Analysis on Thermal Performance of Gas Heater with Finned and Finless Tubes using Characteristics-based Method [Volume 34, Issue 6, 2021, Pages 1537-1544]
-
Characterization
Spectrophotometric Determination of Naproxen Using Chitosan Capped Silver Nanoparticles in Pharmaceutical Formulation [Volume 34, Issue 7, 2021, Pages 1576-1585]
-
Chemical synthesis
Chemical process of synthesizing zinc oxide (ZnO) with nanorod and spherical morphologies [Volume 34, Issue 8, 2021, Pages 1888-1897]
-
Chip size
Effect of Cutting Environment and Swept Angle Selection in Milling Operation [Volume 34, Issue 12, 2021, Pages 2578-2584]
-
Chitosan
Efficient Removal of Copper Ion from Aqueous Solution using Crosslinked Chitosan Grafted with Polyaniline [Volume 34, Issue 2, 2021, Pages 305-312]
-
Chitosan
Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
-
Chitosan
Spectrophotometric Determination of Naproxen Using Chitosan Capped Silver Nanoparticles in Pharmaceutical Formulation [Volume 34, Issue 7, 2021, Pages 1576-1585]
-
Choice Model
Planned Special Event Travel Demand Model Development [Volume 34, Issue 2, 2021, Pages 336-347]
-
Circular edge crack
Study of the Fracture Behavior under the Effect of Cross-ply and Angle-ply Arrangement of FRP Composite Laminate Subjected to Central Circular Cut-out with Mechanical and Thermal Loading Conditions [Volume 34, Issue 6, 2021, Pages 1523-1529]
-
City Gas Station
Sensitivity Analysis on Thermal Performance of Gas Heater with Finned and Finless Tubes using Characteristics-based Method [Volume 34, Issue 6, 2021, Pages 1537-1544]
-
Clad Properties
Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate [Volume 34, Issue 2, 2021, Pages 480-486]
-
Classification
Supervised and Unsupervised Clustering Based Dimensionality Reduction of Hyperspectral Data [Volume 34, Issue 6, 2021, Pages 1407-1412]
-
Classification
Extreme Learning Machine based Pattern Classifiers for Symbolic Interval Data [Volume 34, Issue 11, 2021, Pages 2545-2556]
-
Clastic Rock
Experimental Investigation of the Change of Elastic Moduli of Clastic Rocks under Nonlinear Loading [Volume 34, Issue 3, 2021, Pages 750-755]
-
Closed-loop supply chain
Developing a Bi-objective Mathematical Model to Design the Fish Closed-loop Supply Chain [Volume 34, Issue 5, 2021, Pages 1257-1268]
-
Clustering
A Clustering-Based Approach for Features Extraction in Spectro-Temporal Domain Using Artificial Neural Network [Volume 34, Issue 2, 2021, Pages 452-457]
-
CMOS Cross
Effect of Tail Capacitor on Phase Noise in LC Cross-connected Oscillators: An Analytical Investigation [Volume 34, Issue 1, 2021, Pages 110-119]
-
Coal
Evaluating the Efficiency of Coal Loading Process by Simulating the Process of Loading onto the Face Conveyor with a Shearer with an Additional Share [Volume 34, Issue 7, 2021, Pages 1804-1809]
-
Coal Drying
Effect of Critical Variables on Air Dense Medium Fluidized Bed Coal Drying Efficiency and Kinetics [Volume 34, Issue 5, 2021, Pages 1362-1370]
-
Coal Open Pit
Korkinsk Brown Coal Open Pit as a Case Study of Endogenous Fires [Volume 34, Issue 1, 2021, Pages 293-304]
-
Coated electrode
Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
-
CO boiler
Investigating the Performance of CO Boiler Burners in the RFCC Unit with CFD Simulation [Volume 34, Issue 3, 2021, Pages 587-597]
-
COF
Dry sliding behavior of carbon-based brake pad materials [Volume 34, Issue 11, 2021, Pages 2517-2524]
-
Cogging Torque
Cogging Torque Minimization in Transverse Flux Permanent Magnet Generators using Two-step Axial Permanent Magnet Segmentation for Direct Drive Wind Turbine Application [Volume 34, Issue 4, 2021, Pages 908-918]
-
Cognitive radio
Mitigation of Spectrum Sensing Data Falsification Attack in Cognitive Radio Networks using Trust Based Cooperative Sensing [Volume 34, Issue 6, 2021, Pages 1468-1474]
-
Cohesive bond models
Numerical Study on Flexural Behavior of Concrete Beams Strengthened with Fiber Reinforced Cementitious Matrix Considering Different Concrete Compressive Strength and Steel Reinforcement Ratio [Volume 34, Issue 4, 2021, Pages 793-802]
-
Cold rolling
Effects of cold rolling and annealing time on fatigue resistance of AA5052 aluminum alloy [Volume 34, Issue 9, 2021, Pages 2189-2197]
-
Collapse
Influence of Plastic Fiber on the Geotechnical Properties of Gypseous Soil [Volume 34, Issue 2, 2021, Pages 367-374]
-
Collapsible Soil
Large-Scale Experimental Study on Collapsible Soil Improvement Using Encased Stone Columns [Volume 34, Issue 5, 2021, Pages 1145-1155]
-
Collision Avoidance
Any-time randomized kinodynamic path planning algorithm in dynamic environments with application to quadrotor [Volume 34, Issue 10, 2021, Pages 2360-2370]
-
Color Straight Line Pattern
Fast Color Straight Line Pattern Recognition in an Object Using High Speed Self Learning Devices [Volume 34, Issue 5, 2021, Pages 1225-1232]
-
Columns
Improved Strength and Stiffness Characteristics of Cross-laminated Poplar Timber Columns [Volume 34, Issue 4, 2021, Pages 803-810]
-
Combinatorial Optimization
Optimization of Travelling Salesman Problem on Single Valued Triangular Neutrosophic Number using Dhouib-Matrix-TSP1 Heuristic [Volume 34, Issue 12, 2021, Pages 2642-2647]
-
Combustion
Investigating the Performance of CO Boiler Burners in the RFCC Unit with CFD Simulation [Volume 34, Issue 3, 2021, Pages 587-597]
-
Comfort
The Post-disaster House: Simple Instant House using Lightweight Steel Structure, Bracing, and Local Wood Wall [Volume 34, Issue 2, 2021, Pages 348-354]
-
Comparator
Design of Area Efficient Single Bit Comparator Circuit using Quantum dot Cellular Automata and its Digital Logic Gates Realization [Volume 34, Issue 12, 2021, Pages 2672-2678]
-
Composite
Experimental Damage Evaluation of Honeycomb Sandwich with Composite Face Sheets under Impact Load [Volume 34, Issue 4, 2021, Pages 999-1007]
-
Composite drill strings
Non-linear Axial Vibrations of Composite Drill Strings Considering Interaction of Roller Cone Bit and Polycrystalline Diamond Compact Bit with Rock [Volume 34, Issue 4, 2021, Pages 1016-1023]
-
Composite laminate
A Continuum Damage Mechanics-based Piecewise Fatigue Damage Model for Fatigue Life Prediction of Fiber-Reinforced Laminated Composites [Volume 34, Issue 6, 2021, Pages 1512-1522]
-
Composites
The Prediction of Stress and Strain Behaviors in Composite Gears using FEM [Volume 34, Issue 2, 2021, Pages 556-563]
-
Compressible
Development of a New Supersonic Rotor-vane Ejector using Computational Fluid Dynamics [Volume 34, Issue 1, 2021, Pages 234-242]
-
Compression after impact
Experimental Damage Evaluation of Honeycomb Sandwich with Composite Face Sheets under Impact Load [Volume 34, Issue 4, 2021, Pages 999-1007]
-
Compressive strength
Essential Improvements in Gypsum Mortar Characteristics [Volume 34, Issue 2, 2021, Pages 319-325]
-
Compressive strength
Effect of Super absorbent polymer on workability, strength and durability of Self consolidating concrete [Volume 34, Issue 5, 2021, Pages 1118-1123]
-
Compressive strength
Optimization of Calcined Bentonite Clay Utilization in Cement Mortar using Response Surface Methodology [Volume 34, Issue 7, 2021, Pages 1623-1631]
-
Compressive strength
Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method [Volume 34, Issue 10, 2021, Pages 2351-2359]
-
Computational Fluid Dynamics
Numerical modeling and Optimization of Respirational Emergency Drug Delivery Device using Computational Fluid Dynamics and Response Surface Method [Volume 34, Issue 2, 2021, Pages 547-555]
-
COMSOL Multiphysics
Design and Analysis of High Efficiency Perovskite Solar Cells with Light Trapping Nano-textured Substrates [Volume 34, Issue 4, 2021, Pages 873-880]
-
Concrete
Orthotropic Coefficients and Continuity Factors of Reinforced Concrete Slabs Supported on 3-sides [Volume 34, Issue 2, 2021, Pages 375-381]
-
Concrete
Experimental Study on Single Bay Reinforced Coconut Shell Concrete Portal Frame under Lateral and Cyclic Load [Volume 34, Issue 8, 2021, Pages 1905-1912]
-
Concrete Structures
Flexural Strength and Behavioral Study of High-Performance Concrete Beams using Stress-Block Parameters [Volume 34, Issue 11, 2021, Pages 2557-2565]
-
Condition Monitoring
Gear Fault Detection using Machine Learning Techniques- A Simulation-driven Approach [Volume 34, Issue 1, 2021, Pages 212-223]
-
Conductive adhesive
New Application of Electrically Conductive Adhesive as a Transistor-based Electrical Circuit under AC and DC Currents [Volume 34, Issue 8, 2021, Pages 1819-1826]
-
Congestion Control
Bandwidth Management with Congestion Control Approach and Fuzzy Logic [Volume 34, Issue 4, 2021, Pages 891-900]
-
Consensus protocol
A New Consensus-based Distributed Adaptive Control for Islanded Microgrids [Volume 34, Issue 7, 2021, Pages 1725-1735]
-
Consequences Modeling
Risk Assessment of Gasoline Storage Unit of National Iranian Oil Product Distribution Company using PHAST Software [Volume 34, Issue 4, 2021, Pages 763-768]
-
Consolidation
An Experimental Investigation on Black Cotton Soil using Terrazyme [Volume 34, Issue 8, 2021, Pages 1837-1844]
-
Contact angle
Effect of Silver Clusters Deposition on Wettability and Optical Properties of Diamond-like Carbon Films [Volume 34, Issue 3, 2021, Pages 706-713]
-
Contextual
Routing Protocols for IOT Applications based on Distributed Learning [Volume 34, Issue 4, 2021, Pages 825-831]
-
Continuous Damage Mechanics
Reliability Analysis of Notched Plates under Anisotropic Damage Based on Uniaxial Loading Using Continuum Damage Mechanics Approach [Volume 34, Issue 1, 2021, Pages 253-262]
-
Continuum damage model
A Continuum Damage Mechanics-based Piecewise Fatigue Damage Model for Fatigue Life Prediction of Fiber-Reinforced Laminated Composites [Volume 34, Issue 6, 2021, Pages 1512-1522]
-
Contourlet Transform
Splicing Image Forgery Detection and Localization Based on Color Edge Inconsistency using Statistical Dispersion Measures [Volume 34, Issue 2, 2021, Pages 443-451]
-
Control chart
Designing Exponentially Weighted Moving Average Control Charts under Failure Censoring Reliability Tests [Volume 34, Issue 11, 2021, Pages 2398-2407]
-
Controlled release
Fabrication and evaluation of controlled release of Doxorubicin loaded UiO-66-NH2 metal organic frameworks [Volume 34, Issue 8, 2021, Pages 1874-1881]
-
Cooling roof tile
A Novel Lightweight Phase-changing Cooling Roof Tile [Volume 34, Issue 6, 2021, Pages 1398-1406]
-
Cooperative Spectrum Sensing Primary User
Mitigation of Spectrum Sensing Data Falsification Attack in Cognitive Radio Networks using Trust Based Cooperative Sensing [Volume 34, Issue 6, 2021, Pages 1468-1474]
-
Copper electrorefining
Modeling and Optimization of Charge Materials Ranges in Converter Furnace with Enhanced Passivation Time in Copper Electrorefining Process: A Mixture Design Approach [Volume 34, Issue 4, 2021, Pages 966-975]
-
Copper ions
Efficient Removal of Copper Ion from Aqueous Solution using Crosslinked Chitosan Grafted with Polyaniline [Volume 34, Issue 2, 2021, Pages 305-312]
-
Corneal Cutting Force
Finite Element Simulation and Experimental Test of Ovine Corneal Tissue Cutting Process in Cataract Surgery Operation [Volume 34, Issue 5, 2021, Pages 1321-1328]
-
Corneal Surgery Modeling
Finite Element Simulation and Experimental Test of Ovine Corneal Tissue Cutting Process in Cataract Surgery Operation [Volume 34, Issue 5, 2021, Pages 1321-1328]
-
Correlation coefficient
Utilizing the Modified Popovics Model in study of effect of water to cement ratio, size and shape of aggregate in concrete behavior [Volume 34, Issue 2, 2021, Pages 393-402]
-
Correlation coefficient
Effect of intensity measures on the response of a 3D-structure under different ground motion duration [Volume 34, Issue 10, 2021, Pages 2219-2237]
-
Correlation Matrix
Modified Damage Index Calculation Method for Frame-Shear Wall Building Considering Multiple Demand Parameters [Volume 34, Issue 10, 2021, Pages 2294-2301]
-
Cost-Effectiveness
Assessment the Cost-effectiveness of Information Support for the Business Processes of a Virtual Machine-building Enterprise in the Framework of Industry 4.0 [Volume 34, Issue 1, 2021, Pages 171-176]
-
Coulomb friction model
Introducing an Enhanced Friction Model for Developing Inertia Welding Simulation: A Computational Solid Mechanics Approach [Volume 34, Issue 3, 2021, Pages 737-743]
-
Coulomb stress
Earthquake prediction modeling using dynamic changes (Case Study: Alborz Region) [Volume 34, Issue 2, 2021, Pages 355-366]
-
Counter
Designing Bi-directional Counters Using Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 4, 2021, Pages 901-907]
-
Crack
Statistical Modeling, Optimization and Sensitivity Analysis of Tool’s Geometrical Parameters on Process Force in Automatic Cortical Bone Drilling Process [Volume 34, Issue 2, 2021, Pages 528-535]
-
Critical buckling load
Elastic Buckling Response of a Composite Panel Stiffened Around Cutouts [Volume 34, Issue 1, 2021, Pages 243-252]
-
Cross-laminated Timber
Improved Strength and Stiffness Characteristics of Cross-laminated Poplar Timber Columns [Volume 34, Issue 4, 2021, Pages 803-810]
-
Cross-ply
Study of the Fracture Behavior under the Effect of Cross-ply and Angle-ply Arrangement of FRP Composite Laminate Subjected to Central Circular Cut-out with Mechanical and Thermal Loading Conditions [Volume 34, Issue 6, 2021, Pages 1523-1529]
-
Cryptocurrencies Time Series Short
Comparative Performance of Machine Learning Ensemble Algorithms for Forecasting Cryptocurrency Prices [Volume 34, Issue 1, 2021, Pages 140-148]
-
Cu@Ag particles
New Application of Electrically Conductive Adhesive as a Transistor-based Electrical Circuit under AC and DC Currents [Volume 34, Issue 8, 2021, Pages 1819-1826]
-
Current Summing Network Digitally Programmable-Differential Voltage Current Conveyor Biquadratic Multifunctional filter
Carbon Nanotube Field Effect Transistors Based Digitally Reconfigurable Single Differential Voltage Current Conveyor based Analog Biquadratic Multifunctional Filter at 32nm Technology Node [Volume 34, Issue 11, 2021, Pages 2424-2432]
-
Current Transformer Saturation
A New Simple Method to Avoid Maloperation of Transformer Restricted Earth Fault Relay during External Fault Events [Volume 34, Issue 9, 2021, Pages 2070-2076]
-
Current-Voltage
Kudryavy Volcano Crater Thick Rocks Electrical Breakdown Study in 50 Hz Electromagnetic Field [Volume 34, Issue 5, 2021, Pages 1371-1380]
-
Customer emotions
Effect of Sensory Experience on Customer Word-of-mouth Intention, Considering the Roles of Customer Emotions, Satisfaction, and Loyalty [Volume 34, Issue 3, 2021, Pages 682-699]
-
Customer satisfaction Customer loyalty
Effect of Sensory Experience on Customer Word-of-mouth Intention, Considering the Roles of Customer Emotions, Satisfaction, and Loyalty [Volume 34, Issue 3, 2021, Pages 682-699]
-
Customer sensory experience
Effect of Sensory Experience on Customer Word-of-mouth Intention, Considering the Roles of Customer Emotions, Satisfaction, and Loyalty [Volume 34, Issue 3, 2021, Pages 682-699]
-
Customer Word Of Mouth intention
Effect of Sensory Experience on Customer Word-of-mouth Intention, Considering the Roles of Customer Emotions, Satisfaction, and Loyalty [Volume 34, Issue 3, 2021, Pages 682-699]
-
CVVT
Numerical/Experimental Study on Downsized Iranian National Engine (EF7) Performance at Low Engine Speeds [Volume 34, Issue 9, 2021, Pages 2137-2147]
-
Cyber-physical
Intrusion Detection in Cyber-Physical Layer of Smart Grid Using Intelligent Loop Based Artificial Neural Network Technique [Volume 34, Issue 5, 2021, Pages 1250-1256]
-
Cyphos IL 104
Optimization of Green Technique Develop for Europium (III) Extraction by using Phosphonium Ionic Liquid and Central Composite Design Approach [Volume 34, Issue 2, 2021, Pages 508-516]
D
-
Damage
Experimental Damage Evaluation of Honeycomb Sandwich with Composite Face Sheets under Impact Load [Volume 34, Issue 4, 2021, Pages 999-1007]
-
Damage Evaluation
Modified Damage Index Calculation Method for Frame-Shear Wall Building Considering Multiple Demand Parameters [Volume 34, Issue 10, 2021, Pages 2294-2301]
-
DC Motors
Operating Wheelchair Using Flex Sensor [Volume 34, Issue 7, 2021, Pages 1703-1709]
-
DC Offset
Fast Grid Voltage Synchronization Using Modified FLL in Single-Phase Grid-Connected Power Systems [Volume 34, Issue 6, 2021, Pages 1430-1437]
-
DDoS detection
A Hybrid Modified Grasshopper Optimization Algorithm and Genetic Algorithm to Detect and Prevent DDoS Attacks [Volume 34, Issue 4, 2021, Pages 811-824]
-
Deceleration
Effects of Deceleration on Secondary Collisions between Adult Occupants and the Vehicle in Frontal Crash Accidents [Volume 34, Issue 12, 2021, Pages 2658-2664]
-
Decentralized Learning
Concepts, Key Challenges and Open Problems of Federated Learning [Volume 34, Issue 7, 2021, Pages 1667-1683]
-
DeepLab3+
Semantic Segmentation of Lesions from Dermoscopic Images using Yolo-DeepLab Networks [Volume 34, Issue 2, 2021, Pages 458-469]
-
Deep Learning
Semantic Segmentation of Lesions from Dermoscopic Images using Yolo-DeepLab Networks [Volume 34, Issue 2, 2021, Pages 458-469]
-
Deflection-hardening response
Flexural Performance of Fibre Reinforced Concrete with an Optimised Spirally Deformed Steel Fibre [Volume 34, Issue 6, 2021, Pages 1390-1397]
-
Def Rebar
Study of Bond Strength of Plain Surface Wave Type Configuration Rebars with Concrete: A Comparative Study [Volume 34, Issue 2, 2021, Pages 326-335]
-
Degradation growth function
A Continuum Damage Mechanics-based Piecewise Fatigue Damage Model for Fatigue Life Prediction of Fiber-Reinforced Laminated Composites [Volume 34, Issue 6, 2021, Pages 1512-1522]
-
Degree of Curvature
Experimental and Nonlinear Analysis of Cracking in Concrete Arch Dams Due to Seismic Uplift Pressure Variations [Volume 34, Issue 5, 2021, Pages 1156-1166]
-
Depressurization
Simple Slope Stabilization on Quartz Sandstone using Horizontal Drain [Volume 34, Issue 4, 2021, Pages 1046-1051]
-
Design of experiment
Cogging Torque Minimization in Transverse Flux Permanent Magnet Generators using Two-step Axial Permanent Magnet Segmentation for Direct Drive Wind Turbine Application [Volume 34, Issue 4, 2021, Pages 908-918]
-
Design of experiment
Modeling and Optimization of Charge Materials Ranges in Converter Furnace with Enhanced Passivation Time in Copper Electrorefining Process: A Mixture Design Approach [Volume 34, Issue 4, 2021, Pages 966-975]
-
Detection
Detection of Bikers without Helmet Using Image Texture and Shape Analysis [Volume 34, Issue 3, 2021, Pages 650-655]
-
Dewatering
Simple Slope Stabilization on Quartz Sandstone using Horizontal Drain [Volume 34, Issue 4, 2021, Pages 1046-1051]
-
Diamond-like carbon
Effect of Silver Clusters Deposition on Wettability and Optical Properties of Diamond-like Carbon Films [Volume 34, Issue 3, 2021, Pages 706-713]
-
Diesel engine
Investigating behavior of VLCC ship’s diesel engine on handling stormy waters [Volume 34, Issue 8, 2021, Pages 1845-1855]
-
Differential Voltage Current Conveyor
Carbon Nanotube Field Effect Transistors Based Digitally Reconfigurable Single Differential Voltage Current Conveyor based Analog Biquadratic Multifunctional Filter at 32nm Technology Node [Volume 34, Issue 11, 2021, Pages 2424-2432]
-
Digital image analysis
Soil Shrinkage Characterization of Low Plasticity Soil Using Digital Image Analysis Process [Volume 34, Issue 10, 2021, Pages 2206-2212]
-
Dimension less rotational speed
Experimental Investigation on the Effect a Rotational Shaft on the Thermal Behavior of a Circular Tube under Constant Heat Flux [Volume 34, Issue 4, 2021, Pages 1008-1015]
-
Disaster Management
Presenting a New Method for Earthquake Relief Center Location Allocation based on Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 769-781]
-
Disaster Management
Location Allocation of Earthquake Relief Centers in Yazd City Based on Whale Optimization Algorithm [Volume 34, Issue 5, 2021, Pages 1184-1194]
-
Dispersion
Experimental Investigation of the Change of Elastic Moduli of Clastic Rocks under Nonlinear Loading [Volume 34, Issue 3, 2021, Pages 750-755]
-
Dissimilar Joints
Control of Steel Detachment and Metal Flow on Aluminum-Steel Friction Stir Welding of thin Joints [Volume 34, Issue 4, 2021, Pages 1024-1034]
-
Dissimilar sheets
Study of Friction Stir Spot Welding of Aluminum/Copper Dissimilar Sheets using Taguchi Approach [Volume 34, Issue 5, 2021, Pages 1329-1135]
-
Dissimilar Weldedjoints
Influence of Immersion Corrosion on Mechanical Properties of AISI 430/AISI 316L Dissimilar Welded Joints [Volume 34, Issue 5, 2021, Pages 1352-1361]
-
Distance Computation
Private Trajectory Intersection Testing: Is Garbled Circuit Better than Custom Protocols? [Volume 34, Issue 4, 2021, Pages 863-872]
-
Distributed control
A New Consensus-based Distributed Adaptive Control for Islanded Microgrids [Volume 34, Issue 7, 2021, Pages 1725-1735]
-
Disturbance Observer
A Disturbance Observer Based Fuzzy Feedforward Proportional Integral Load Frequency Control of Microgrids [Volume 34, Issue 7, 2021, Pages 1694-1702]
-
Disturbances
A New Consensus-based Distributed Adaptive Control for Islanded Microgrids [Volume 34, Issue 7, 2021, Pages 1725-1735]
-
Document clustering
A Two-Level Semi-supervised Clustering Technique for News Articles [Volume 34, Issue 12, 2021, Pages 2648-2657]
-
Drift Ratio
Blast Demand Estimation of RC-Moment-Resisting Frames using a Proposed Multi-modal Adaptive Pushover Analysis Procedure [Volume 34, Issue 1, 2021, Pages 46-55]
-
Drilling Force
Statistical Modeling, Optimization and Sensitivity Analysis of Tool’s Geometrical Parameters on Process Force in Automatic Cortical Bone Drilling Process [Volume 34, Issue 2, 2021, Pages 528-535]
-
Drug Delivery Device
Numerical modeling and Optimization of Respirational Emergency Drug Delivery Device using Computational Fluid Dynamics and Response Surface Method [Volume 34, Issue 2, 2021, Pages 547-555]
-
Drug loading
Titanium Dioxide Nanotubes Incorporated Bioactive Glass Nanocomposites: Synthesis, Characterization, Bioactivity Evaluation and Drug Loading [Volume 34, Issue 1, 2021, Pages 1-9]
-
Drug-target Interactionsو Drug discovery processو Computational Predictionو Weighted Nuclear Norm Minimization
Prediction of Drug-Target Protein Interaction Based on the Minimization of Weighted Nuclear Norm and Similarity Graph between Drugs and Target Proteins [Volume 34, Issue 7, 2021, Pages 1736-1742]
-
Dry cutting
Effect of Cutting Environment and Swept Angle Selection in Milling Operation [Volume 34, Issue 12, 2021, Pages 2578-2584]
-
Dry sliding
Dry sliding behavior of carbon-based brake pad materials [Volume 34, Issue 11, 2021, Pages 2517-2524]
-
Dual Output Voltage Differencing Buffered Amplifier
Dual Output Voltage Differencing Buffered Amplifier Based Active -C Multiphase Sinusoidal Oscillator [Volume 34, Issue 6, 2021, Pages 1438-1444]
-
Ductility index
Comparative Study on Structural Behavior of Reinforced Concrete Straight Beam and Beams with out of Plane Parts [Volume 34, Issue 10, 2021, Pages 2280-2293]
-
Durability
Influence of Bi-directional Fibreglass Grid Reinforcement on Drying Shrinkage and Mechanical Properties of Lightweight Foamed Concrete [Volume 34, Issue 1, 2021, Pages 10-18]
-
Durability
Study of Bond Strength of Plain Surface Wave Type Configuration Rebars with Concrete: A Comparative Study [Volume 34, Issue 2, 2021, Pages 326-335]
-
Durability
Mechanical Properties of Ultra-high Performance Concrete Reinforced by Glass Fibers under Accelerated Aging [Volume 34, Issue 5, 2021, Pages 1074-1084]
-
Durability
Durability and Aging Characteristics of Sustainable Paving Mixture [Volume 34, Issue 8, 2021, Pages 1865-1873]
-
Durability properties
Durability and Mechanical Properties of Self-compacting Concretes with Combined Use of Aluminium Oxide Nanoparticles and Glass Fiber [Volume 34, Issue 1, 2021, Pages 26-38]
-
Durability properties
Evaluation of the Combined Use of Waste Paper Sludge Ash and Nanomaterials on Mechanical Properties and Durability of High Strength Concretes [Volume 34, Issue 7, 2021, Pages 1653-1666]
-
Dynamic loading
Behavior of Gypseous Soil under Static and Dynamic Loading [Volume 34, Issue 8, 2021, Pages 1882-1887]
-
Dynamic Migration
Improving the Load Balancing and Dynamic Placement of Virtual Machines in Cloud Computing using Particle Swarm Optimization Algorithm [Volume 34, Issue 6, 2021, Pages 1419-1429]
-
Dynamic Obstacles
Any-time randomized kinodynamic path planning algorithm in dynamic environments with application to quadrotor [Volume 34, Issue 10, 2021, Pages 2360-2370]
-
Dynamic Relaxation method
Ratcheting Analysis of Steel Plate under Cycling Loading using Dynamic Relaxation Method Experimentally Validated [Volume 34, Issue 6, 2021, Pages 1530-1536]
-
Dynamic Response
Dynamic Response Analysis of a High Glide Ratio Parachute System [Volume 34, Issue 1, 2021, Pages 195-201]
-
Dynamics pressure
Single-phase and Two-phase Smoothed Particle Hydrodynamics for Sloshing in the Low Filling Ratio of the Prismatic Tank [Volume 34, Issue 5, 2021, Pages 1345-1351]
-
Dynamic viscosity
A neural network approach to estimate non-Newtonian behavior of nanofluid phase change material containing mesoporous silica particles [Volume 34, Issue 8, 2021, Pages 1974-1981]
E
-
Earth Mover's distance
Improved Object Matching in Multi-Objects Tracking Based On Zernike Moments and Combination of Multiple Similarity Metrics [Volume 34, Issue 6, 2021, Pages 1445-1454]
-
Earthquake prediction
Earthquake prediction modeling using dynamic changes (Case Study: Alborz Region) [Volume 34, Issue 2, 2021, Pages 355-366]
-
Earth viscosity
Earthquake prediction modeling using dynamic changes (Case Study: Alborz Region) [Volume 34, Issue 2, 2021, Pages 355-366]
-
Economic Assessment
Durability and Aging Characteristics of Sustainable Paving Mixture [Volume 34, Issue 8, 2021, Pages 1865-1873]
-
Eddy current
Application of Artificial Neural Network and Multi-magnetic NDE Methods to Determine Mechanical Properties of Plain Carbon Steels Subjected to Tempering Treatment [Volume 34, Issue 4, 2021, Pages 919-927]
-
Edge detection filter
An Efficient Approach for Edge Detection Technique Using Kalman Filter with Artificial Neural Network [Volume 34, Issue 12, 2021, Pages 2604-2610]
-
EDM
Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
-
EDM
Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
-
EDPs
Modified Damage Index Calculation Method for Frame-Shear Wall Building Considering Multiple Demand Parameters [Volume 34, Issue 10, 2021, Pages 2294-2301]
-
Ejector
Development of a New Supersonic Rotor-vane Ejector using Computational Fluid Dynamics [Volume 34, Issue 1, 2021, Pages 234-242]
-
Elastic moduli
Experimental Investigation of the Change of Elastic Moduli of Clastic Rocks under Nonlinear Loading [Volume 34, Issue 3, 2021, Pages 750-755]
-
Elastic-plastic deformation
Ratcheting Analysis of Steel Plate under Cycling Loading using Dynamic Relaxation Method Experimentally Validated [Volume 34, Issue 6, 2021, Pages 1530-1536]
-
Electrical resistivity
Effect of Super absorbent polymer on workability, strength and durability of Self consolidating concrete [Volume 34, Issue 5, 2021, Pages 1118-1123]
-
Electric Grid
Simulation of Photovoltaic System as a Tool of a State’s Energy Security [Volume 34, Issue 2, 2021, Pages 487-492]
-
Electroencephalogram
Epileptic Electroencephalogram Classification using Relative Wavelet Sub-Band Energy and Wavelet Entropy [Volume 34, Issue 1, 2021, Pages 75-81]
-
Electromagnetic field
Towards a Uncertainty Analysis in Thermal Protection using Phase-change Micro/Nano Particles during Hyperthermia [Volume 34, Issue 1, 2021, Pages 263-271]
-
Electronic devices
Employing the Empirical Mode Decomposition to Denoise the Random Telegraph Noise [Volume 34, Issue 1, 2021, Pages 90-96]
-
Electrorefining
Removing of Sb and As from Electrolyte in Copper Electrorefining Process: A Green Approach [Volume 34, Issue 3, 2021, Pages 700-705]
-
Electrostatic
A new wide tunability MEMS based variable capacitor using two separate electro-static vertical comb drive actuators [Volume 34, Issue 11, 2021, Pages 2534-2544]
-
Empirical Mode Decompositio
Employing the Empirical Mode Decomposition to Denoise the Random Telegraph Noise [Volume 34, Issue 1, 2021, Pages 90-96]
-
Endogenous Fire
Korkinsk Brown Coal Open Pit as a Case Study of Endogenous Fires [Volume 34, Issue 1, 2021, Pages 293-304]
-
Endotracheal tube
Numerical modeling and Optimization of Respirational Emergency Drug Delivery Device using Computational Fluid Dynamics and Response Surface Method [Volume 34, Issue 2, 2021, Pages 547-555]
-
End-to-end learning method
Holistic Persian Handwritten Word Recognition Using Convolutional Neural Network [Volume 34, Issue 8, 2021, Pages 2028-2037]
-
Energy Converter
Evaluation of Linear Permanent Magnet Vernier Machine Topologies for Wave Energy Converters [Volume 34, Issue 2, 2021, Pages 403-413]
-
Energy Density Release Rate
Reliability Analysis of Notched Plates under Anisotropic Damage Based on Uniaxial Loading Using Continuum Damage Mechanics Approach [Volume 34, Issue 1, 2021, Pages 253-262]
-
Energy dissipation
Sensitivity Analysis of Behavior of Simple Trapezoidal Steel Plates to Introduce a New Yielding Damper [Volume 34, Issue 10, 2021, Pages 2302-2312]
-
Energy efficiency
Energy-aware task scheduling in cloud compting based on discrete pathfinder algorithm [Volume 34, Issue 9, 2021, Pages 2124-2136]
-
Energy Projects
System of Comprehensive Assessment of Project Risks in the Energy Industry [Volume 34, Issue 7, 2021, Pages 1778-1784]
-
Engine
Experimental Study on Yttria Stabilized and Titanium Oxide Thermal Barrier Coated Piston Effect on Engine Performance and Emission Characteristics [Volume 34, Issue 12, 2021, Pages 2611-2616]
-
Engine Downsizing
Numerical/Experimental Study on Downsized Iranian National Engine (EF7) Performance at Low Engine Speeds [Volume 34, Issue 9, 2021, Pages 2137-2147]
-
Engine oil industry
A Robust Multi-objective Fuzzy Model for a Green Closed-loop Supply Chain Network under Uncertain Demand and Reliability (A Case Study in Engine Oil Industry) [Volume 34, Issue 12, 2021, Pages 2585-2603]
-
Engine Performance
Experimental Study of the Effect of a Non-Oxygenated Additive on Spark-Ignition Engine Performance and Pollutant Emissions [Volume 34, Issue 4, 2021, Pages 1035-1045]
-
Entrainment ratio
Development of a New Supersonic Rotor-vane Ejector using Computational Fluid Dynamics [Volume 34, Issue 1, 2021, Pages 234-242]
-
Entropy
Epileptic Electroencephalogram Classification using Relative Wavelet Sub-Band Energy and Wavelet Entropy [Volume 34, Issue 1, 2021, Pages 75-81]
-
Entropy
Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
-
Environment
Multi-objective Optimal Design of Gas-fired Heater Based on Modified Design Model of Fired Heater Taking into Account Exergy, Economic and Environmental Factors [Volume 34, Issue 7, 2021, Pages 1785-1798]
-
Environmental Component
An Application of Fuzzy-VIKOR Method in Environmental Impact Assessment of the Boog Mine Southeast of Iran [Volume 34, Issue 6, 2021, Pages 1545-1556]
-
Environmental Considerations
A Bi-objective Robust Optimization Model for an Integrated Production-distribution Problem of Perishable Goods with Demand Improvement Strategies: A Case Study [Volume 34, Issue 7, 2021, Pages 1766-1777]
-
Environmental impact assessment
An Application of Fuzzy-VIKOR Method in Environmental Impact Assessment of the Boog Mine Southeast of Iran [Volume 34, Issue 6, 2021, Pages 1545-1556]
-
Epilepsy
Epileptic Electroencephalogram Classification using Relative Wavelet Sub-Band Energy and Wavelet Entropy [Volume 34, Issue 1, 2021, Pages 75-81]
-
Ergonomic
The Post-disaster House: Simple Instant House using Lightweight Steel Structure, Bracing, and Local Wood Wall [Volume 34, Issue 2, 2021, Pages 348-354]
-
ESF
Soft System Methodology: Project vs Local Community Interests in Project Social Conflict [Volume 34, Issue 9, 2021, Pages 2107-2115]
-
Essential work of fracture
Microstructure and mechanical properties of PA6/NBR nanocomposites fabricated by friction stir processing [Volume 34, Issue 10, 2021, Pages 2371-2378]
-
Euclidean Distance
Private Trajectory Intersection Testing: Is Garbled Circuit Better than Custom Protocols? [Volume 34, Issue 4, 2021, Pages 863-872]
-
Europium
Optimization of Green Technique Develop for Europium (III) Extraction by using Phosphonium Ionic Liquid and Central Composite Design Approach [Volume 34, Issue 2, 2021, Pages 508-516]
-
Exergy analysis
Multi-objective Optimal Design of Gas-fired Heater Based on Modified Design Model of Fired Heater Taking into Account Exergy, Economic and Environmental Factors [Volume 34, Issue 7, 2021, Pages 1785-1798]
-
Expanded Polystyrene Sheet
A Novel Lightweight Phase-changing Cooling Roof Tile [Volume 34, Issue 6, 2021, Pages 1398-1406]
-
Experimental Testing
Flexural Strength and Behavioral Study of High-Performance Concrete Beams using Stress-Block Parameters [Volume 34, Issue 11, 2021, Pages 2557-2565]
-
Expiration Date
A Blood Supply Chain Network with Backup Facilities Considering Blood Groups and Expiration Date: A Real-world Application [Volume 34, Issue 2, 2021, Pages 470-479]
-
Extended Finite Element
Experimental and Nonlinear Analysis of Cracking in Concrete Arch Dams Due to Seismic Uplift Pressure Variations [Volume 34, Issue 5, 2021, Pages 1156-1166]
-
Extreme learning machine
Extreme Learning Machine based Pattern Classifiers for Symbolic Interval Data [Volume 34, Issue 11, 2021, Pages 2545-2556]
F
-
Face recognition
A Three-stage Filtering Approach for Face Recognition [Volume 34, Issue 8, 2021, Pages 1856-1864]
-
Factor
Multi-stage Performance Upgrade of Steel Moment Frames by Post-tension Connections [Volume 34, Issue 5, 2021, Pages 1132-1144]
-
Failure censoring
Designing Exponentially Weighted Moving Average Control Charts under Failure Censoring Reliability Tests [Volume 34, Issue 11, 2021, Pages 2398-2407]
-
Failure modes
Comparative Study on Structural Behavior of Reinforced Concrete Straight Beam and Beams with out of Plane Parts [Volume 34, Issue 10, 2021, Pages 2280-2293]
-
False Data Injection Attack (FDIA)
Intrusion Detection in Cyber-Physical Layer of Smart Grid Using Intelligent Loop Based Artificial Neural Network Technique [Volume 34, Issue 5, 2021, Pages 1250-1256]
-
Far-field
Effect of Foundation Flexibility on the Seismic Performance of a High-Rise Structure under Far-Field and Near-Field Earthquakes [Volume 34, Issue 7, 2021, Pages 1611-1622]
-
Fast Object Recognition
Fast Color Straight Line Pattern Recognition in an Object Using High Speed Self Learning Devices [Volume 34, Issue 5, 2021, Pages 1225-1232]
-
Fault/error detection
An Enhanced Self-checking Carry Select Adder Utilizing the Concept of Self-checking Full Adder [Volume 34, Issue 2, 2021, Pages 433-442]
-
Fault Isolation
Actuator Fault Detection and Isolation for Helicopter Unmanned Arial Vehicle in the Present of Disturbance [Volume 34, Issue 3, 2021, Pages 676-681]
-
Fe3O4-Ethylene Glycol Nanofluid
Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
-
Feature Extraction
A Clustering-Based Approach for Features Extraction in Spectro-Temporal Domain Using Artificial Neural Network [Volume 34, Issue 2, 2021, Pages 452-457]
-
Feature Extraction
Supervised and Unsupervised Clustering Based Dimensionality Reduction of Hyperspectral Data [Volume 34, Issue 6, 2021, Pages 1407-1412]
-
Feature Extraction
A study on the modified algorithm for image processing in Tracking Seam Welding [Volume 34, Issue 8, 2021, Pages 1913-1922]
-
Federated Learning
A Game-Theoretic Approach for Robust Federated Learning [Volume 34, Issue 4, 2021, Pages 832-842]
-
Federated Learning
Concepts, Key Challenges and Open Problems of Federated Learning [Volume 34, Issue 7, 2021, Pages 1667-1683]
-
Ferro-cement
Experimental Investigations on Strengthened Reinforced Concrete Columns under Monotonic Axial Loading [Volume 34, Issue 5, 2021, Pages 1124-1131]
-
Fiber laser
Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate [Volume 34, Issue 2, 2021, Pages 480-486]
-
Fiber Orientation
Elastic Buckling Response of a Composite Panel Stiffened Around Cutouts [Volume 34, Issue 1, 2021, Pages 243-252]
-
Fiber plastic
Influence of Plastic Fiber on the Geotechnical Properties of Gypseous Soil [Volume 34, Issue 2, 2021, Pages 367-374]
-
Fiber reinforced cementitious matrix
Numerical Study on Flexural Behavior of Concrete Beams Strengthened with Fiber Reinforced Cementitious Matrix Considering Different Concrete Compressive Strength and Steel Reinforcement Ratio [Volume 34, Issue 4, 2021, Pages 793-802]
-
Fiber-silica fume composite gel
Strengthening of RC Beams Using SCC Jacket Consisting of Glass Fiber and Fiber-Silica Fume Composite Gel [Volume 34, Issue 8, 2021, Pages 1923-1939]
-
Fibre Reinforced Concrete
Flexural Performance of Fibre Reinforced Concrete with an Optimised Spirally Deformed Steel Fibre [Volume 34, Issue 6, 2021, Pages 1390-1397]
-
Fibre Reinforced Polymer
Improved Strength and Stiffness Characteristics of Cross-laminated Poplar Timber Columns [Volume 34, Issue 4, 2021, Pages 803-810]
-
Filling Structure
Axial Compression Performance of Square Tube Filled with Foam Aluminum [Volume 34, Issue 5, 2021, Pages 1336-1344]
-
Finite Element
Magnetohydrodynamic (MHD) Flow in a Channel Including a Rotating Cylinder [Volume 34, Issue 1, 2021, Pages 224-233]
-
Finite Element
Behavior and Strength of Steel Fiber Reinforced Self-compacting Concrete Columns Wrapped by Carbon Fiber Reinforced Polymers Strips [Volume 34, Issue 2, 2021, Pages 382-392]
-
Finite Element
Non-linear Axial Vibrations of Composite Drill Strings Considering Interaction of Roller Cone Bit and Polycrystalline Diamond Compact Bit with Rock [Volume 34, Issue 4, 2021, Pages 1016-1023]
-
Finite Element
Numerical Study on Flexural Behavior of Concrete Beams Strengthened with Fiber Reinforced Cementitious Matrix Considering Different Concrete Compressive Strength and Steel Reinforcement Ratio [Volume 34, Issue 4, 2021, Pages 793-802]
-
Finite Element
Analysis of Under-Reamed Piles Subjected to Different Types of Load in Clayey Soil [Volume 34, Issue 8, 2021, Pages 1940-1948]
-
Finite element anlaysis
Experimental and Finite Element Analysis of Single Stage Single Point Incremental Forming [Volume 34, Issue 10, 2021, Pages 2259-2265]
-
Finite element method
Evaluation of Linear Permanent Magnet Vernier Machine Topologies for Wave Energy Converters [Volume 34, Issue 2, 2021, Pages 403-413]
-
Finite element method
Design Procedure of an Outer Rotor Synchronous Reluctance Machine for Scooter Application [Volume 34, Issue 3, 2021, Pages 656-666]
-
Finite element method
Design and Analysis of High Efficiency Perovskite Solar Cells with Light Trapping Nano-textured Substrates [Volume 34, Issue 4, 2021, Pages 873-880]
-
Finite element method
Retrofitting of RC Beams using Reinforced Self-compacting Concrete Jackets Containing Aluminum Oxide Nanoparticles [Volume 34, Issue 5, 2021, Pages 1195-1212]
-
Finite element method
An Improvement on Slot Configuration Structure of a Low-Speed Surface-Mounted Permanent Magnet Synchronous Generator with a Wound Cable Winding [Volume 34, Issue 9, 2021, Pages 2045-2052]
-
Finite element method
Evaluating the effect of Buckling-Restrained Braces in Steel Buildings against Progressive failure using Different Simulation Strategies [Volume 34, Issue 10, 2021, Pages 2248-2258]
-
Finite element method
Analysis of a New Linear Dual Stator Consequent Pole Halbach Array Flux Reversal Machine [Volume 34, Issue 8, 2021, Pages 2002-2009]
-
Finite element method
Multi-objective optimization design and Verification of Interior PMSG Based on Finite Element Analysis and Taguchi method [Volume 34, Issue 9, 2021, Pages 2097-2106]
-
Finite element model
Finite Element Simulation and Experimental Test of Ovine Corneal Tissue Cutting Process in Cataract Surgery Operation [Volume 34, Issue 5, 2021, Pages 1321-1328]
-
Finite elements
Strength Capacity Cracks Propagations Deflection and Tensile Enhancement of Reinforced Concrete Beams Warped by Glass Fiber Reinforced Polymer Strips [Volume 34, Issue 5, 2021, Pages 1094-1104]
-
Finite Elements Analysis
Multi-objective Optimization of HMGF Process Parameters for Manufacturing AA6063 Stepped Tubes using FEM-RSM [Volume 34, Issue 5, 2021, Pages 1305-1312]
-
Finite elements simulation
Numerical analyses of Manufacturing of an AA8111 Pin-shaped Bipolar Plate by Hot Metal Gas Forming [Volume 34, Issue 8, 2021, Pages 1994-2001]
-
First order reliability method
Reliability Analysis of Notched Plates under Anisotropic Damage Based on Uniaxial Loading Using Continuum Damage Mechanics Approach [Volume 34, Issue 1, 2021, Pages 253-262]
-
Fish reverse logistics
Developing a Bi-objective Mathematical Model to Design the Fish Closed-loop Supply Chain [Volume 34, Issue 5, 2021, Pages 1257-1268]
-
Fixed bed
Effect of Critical Variables on Air Dense Medium Fluidized Bed Coal Drying Efficiency and Kinetics [Volume 34, Issue 5, 2021, Pages 1362-1370]
-
Fixed-time control system
Modeling the traffic signal control system at an isolated intersection using queuing systems [Volume 34, Issue 9, 2021, Pages 2077-2086]
-
Flex Sensor
Operating Wheelchair Using Flex Sensor [Volume 34, Issue 7, 2021, Pages 1703-1709]
-
Flexural Performance
Flexural Performance of Fibre Reinforced Concrete with an Optimised Spirally Deformed Steel Fibre [Volume 34, Issue 6, 2021, Pages 1390-1397]
-
Floating actuator Fault
Robust Three Stage Central Difference Kalman Filter for Helicopter Unmanned Aerial Vehicle Actuators Fault Estimation [Volume 34, Issue 5, 2021, Pages 1290-1296]
-
Fluid-structure interaction
Seismic Analysis of Double Deck Floating Roofs of Siraf Storage Tanks with Condensate, Light and Heavy Crude Oils [Volume 34, Issue 10, 2021, Pages 2319-2331]
-
Fly ah
Engineering properties of soil stabilized with cement and fly ash for sustainable road construction [Volume 34, Issue 12, 2021, Pages 2665-2671]
-
F-N Curve
Risk Assessment of Gasoline Storage Unit of National Iranian Oil Product Distribution Company using PHAST Software [Volume 34, Issue 4, 2021, Pages 763-768]
-
Foamed concrete
Influence of Bi-directional Fibreglass Grid Reinforcement on Drying Shrinkage and Mechanical Properties of Lightweight Foamed Concrete [Volume 34, Issue 1, 2021, Pages 10-18]
-
Foam Seal
Seismic Analysis of Double Deck Floating Roofs of Siraf Storage Tanks with Condensate, Light and Heavy Crude Oils [Volume 34, Issue 10, 2021, Pages 2319-2331]
-
Forced vibrations
Non-linear forced vibration analysis of piezoelectric functionally graded beams in thermal environment. [Volume 34, Issue 11, 2021, Pages 2387-2397]
-
Foundation Flexibility
Effect of Foundation Flexibility on the Seismic Performance of a High-Rise Structure under Far-Field and Near-Field Earthquakes [Volume 34, Issue 7, 2021, Pages 1611-1622]
-
Four-stroke spark ignition (SI) engine
Experimental Study of the Effect of a Non-Oxygenated Additive on Spark-Ignition Engine Performance and Pollutant Emissions [Volume 34, Issue 4, 2021, Pages 1035-1045]
-
Fracture mechanics
Effect of Additional Zirconia on Fracture Mechanics of Bioactive Glass-ceramics Using Digital Image Correlation [Volume 34, Issue 9, 2021, Pages 2053-2059]
-
Fracture toughness
ModeI fracture toughness of Carbon/glass hybrid comopsite [Volume 34, Issue 11, 2021, Pages 2418-2423]
-
Fragility curves
Seismic Vulnerability Studies of a G+17 storey building in Abu Dhabi - UAE using Fragility Curves [Volume 34, Issue 5, 2021, Pages 1167-1175]
-
Free surface deformation
Single-phase and Two-phase Smoothed Particle Hydrodynamics for Sloshing in the Low Filling Ratio of the Prismatic Tank [Volume 34, Issue 5, 2021, Pages 1345-1351]
-
Frequency-locked Loop
Fast Grid Voltage Synchronization Using Modified FLL in Single-Phase Grid-Connected Power Systems [Volume 34, Issue 6, 2021, Pages 1430-1437]
-
Frequency Response Analysis
Multi-Conductor Transmission Line Model of Split-Winding Transformer for Frequency Response and Disk-to-Disk Fault Analysis [Volume 34, Issue 6, 2021, Pages 1486-1492]
-
Friction materials
Dry sliding behavior of carbon-based brake pad materials [Volume 34, Issue 11, 2021, Pages 2517-2524]
-
Friction stir spot welding
Study of Friction Stir Spot Welding of Aluminum/Copper Dissimilar Sheets using Taguchi Approach [Volume 34, Issue 5, 2021, Pages 1329-1135]
-
Frontal Crash
Effects of Deceleration on Secondary Collisions between Adult Occupants and the Vehicle in Frontal Crash Accidents [Volume 34, Issue 12, 2021, Pages 2658-2664]
-
FSI
Multi objective optimization of multi-hole orifices using FSI analysis and NSGA II algorithm [Volume 34, Issue 8, 2021, Pages 2038-2044]
-
FSSW
Effect of Pin Geometry and Tool Rotational Speed on Microstructure and Mechanical Properties of Friction Stir Spot Welded Joints in AA2024-O Aluminum Alloy [Volume 34, Issue 8, 2021, Pages 1949-1960]
-
Fuel additive
Experimental Study of the Effect of a Non-Oxygenated Additive on Spark-Ignition Engine Performance and Pollutant Emissions [Volume 34, Issue 4, 2021, Pages 1035-1045]
-
Fuel consumption
Investigating behavior of VLCC ship’s diesel engine on handling stormy waters [Volume 34, Issue 8, 2021, Pages 1845-1855]
-
Fullerene
Analysis on Effect of Fullerene Soot on the Chemical and Physical Properties of Cement Mixtures [Volume 34, Issue 10, 2021, Pages 2313-2318]
-
Functionally graded beams
Non-linear forced vibration analysis of piezoelectric functionally graded beams in thermal environment. [Volume 34, Issue 11, 2021, Pages 2387-2397]
-
Function LC Tank Phase Noise Noise Filtering
Effect of Tail Capacitor on Phase Noise in LC Cross-connected Oscillators: An Analytical Investigation [Volume 34, Issue 1, 2021, Pages 110-119]
-
Fused Deposition Modelling
Fused Deposition Modeling of an Aircraft Wing using Industrial Robot with Non-linear Tool Path Generation [Volume 34, Issue 1, 2021, Pages 272-282]
-
Fuzzy data
An Application of Fuzzy-VIKOR Method in Environmental Impact Assessment of the Boog Mine Southeast of Iran [Volume 34, Issue 6, 2021, Pages 1545-1556]
-
Fuzzy Decision trees
The Construction of Scalable Decision Tree based on Fast Splitting and J-Max Pre-Pruning on Large Datasets [Volume 34, Issue 8, 2021, Pages 1810-1818]
-
Fuzzy entropy
The Construction of Scalable Decision Tree based on Fast Splitting and J-Max Pre-Pruning on Large Datasets [Volume 34, Issue 8, 2021, Pages 1810-1818]
-
Fuzzy Feedforward PI-Controller
A Disturbance Observer Based Fuzzy Feedforward Proportional Integral Load Frequency Control of Microgrids [Volume 34, Issue 7, 2021, Pages 1694-1702]
-
Fuzzy inference system
Memristor Crossbar-Based Hardware Implementation of Type-2 Fuzzy Membership Function and On-Chip Learning [Volume 34, Issue 9, 2021, Pages 2180-2188]
-
Fuzzy logic control
A Novel Control Strategy of an Islanded Microgrid Based on Virtual Flux Droop Control and Direct Flux Fuzzy Control [Volume 34, Issue 5, 2021, Pages 1274-1283]
-
Fuzzy Membership Function
Memristor Crossbar-Based Hardware Implementation of Type-2 Fuzzy Membership Function and On-Chip Learning [Volume 34, Issue 9, 2021, Pages 2180-2188]
-
Fuzzy partitioning
The Construction of Scalable Decision Tree based on Fast Splitting and J-Max Pre-Pruning on Large Datasets [Volume 34, Issue 8, 2021, Pages 1810-1818]
G
-
Gain Band-width
Gain Boosted Folded Cascode Op-Amp with Capacitor Coupled Auxiliary Amplifiers [Volume 34, Issue 5, 2021, Pages 1233-1238]
-
Gain Boosting
Gain Boosted Folded Cascode Op-Amp with Capacitor Coupled Auxiliary Amplifiers [Volume 34, Issue 5, 2021, Pages 1233-1238]
-
Galloping
Numerical Study on Vibration Attenuation of Cylinder using Active Rotary Oscillating Controller [Volume 34, Issue 1, 2021, Pages 202-211]
-
Garbled Circuit
Private Trajectory Intersection Testing: Is Garbled Circuit Better than Custom Protocols? [Volume 34, Issue 4, 2021, Pages 863-872]
-
Gas fired heater
Multi-objective Optimal Design of Gas-fired Heater Based on Modified Design Model of Fired Heater Taking into Account Exergy, Economic and Environmental Factors [Volume 34, Issue 7, 2021, Pages 1785-1798]
-
Gasoline Reservoirs
Risk Assessment of Gasoline Storage Unit of National Iranian Oil Product Distribution Company using PHAST Software [Volume 34, Issue 4, 2021, Pages 763-768]
-
Gas reduction station
Multi-objective Optimal Design of Gas-fired Heater Based on Modified Design Model of Fired Heater Taking into Account Exergy, Economic and Environmental Factors [Volume 34, Issue 7, 2021, Pages 1785-1798]
-
Gate-all-around Structure
A Compact Model of Gate Capacitance in Ballistic Gate-All-Around Carbon Nanotube Field Effect Transistors [Volume 34, Issue 7, 2021, Pages 1718-1724]
-
Gate Capacitance
A Compact Model of Gate Capacitance in Ballistic Gate-All-Around Carbon Nanotube Field Effect Transistors [Volume 34, Issue 7, 2021, Pages 1718-1724]
-
Gaussian Mixture Model
Improved Object Matching in Multi-Objects Tracking Based On Zernike Moments and Combination of Multiple Similarity Metrics [Volume 34, Issue 6, 2021, Pages 1445-1454]
-
GBS
Management of Abandoned Construction Projects in Iraq Using BIM Technology [Volume 34, Issue 3, 2021, Pages 644-649]
-
Gear fault diagnosis
Gear Fault Detection using Machine Learning Techniques- A Simulation-driven Approach [Volume 34, Issue 1, 2021, Pages 212-223]
-
Gelation Agent
Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]
-
Gene expression programming
Optimization of Thermal Decomposition Conditions of Bone to Achieve the Highest Percentage of Crystalline Phase in Bone Char using Gene Expression Programming and Artificial Neural Network [Volume 34, Issue 1, 2021, Pages 184-194]
-
Gene expression programming
Utilization of Gene Expression Programming for Modeling of Mechanical Performance of Titanium/Carbonated Hydroxyapatite Nanobiocomposites: The Combination of Artificial Intelligence and Material Science [Volume 34, Issue 4, 2021, Pages 948-955]
-
General Factorial Design
Nitrogen Starvation Effect Versus its Excess on the Performance of Arthrospira maxima in Zarrouk’s Medium [Volume 34, Issue 7, 2021, Pages 1557-1568]
-
Genetic Algorithm
Optimization of Dam Reservoir Operation Using Grey Wolf Optimization and Genetic Algorithms (A Case Study of Taleghan Dam) [Volume 34, Issue 7, 2021, Pages 1644-1652]
-
Genetic Algorithm
Selective Harmonic Elimination of a Multilevel Voltage Source Inverter Using Whale Optimization Algorithm [Volume 34, Issue 8, 2021, Pages 1898-1904]
-
Genetic Algorithm
Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
-
Geogrid-encased
Large-Scale Experimental Study on Collapsible Soil Improvement Using Encased Stone Columns [Volume 34, Issue 5, 2021, Pages 1145-1155]
-
Geometrical non-linearity
Non-linear forced vibration analysis of piezoelectric functionally graded beams in thermal environment. [Volume 34, Issue 11, 2021, Pages 2387-2397]
-
Geopolymer
Taguchi- Grey relational analysis for Optimizing the Compressive Strength and Porosity of Metakaolin-Based Geopolymer [Volume 34, Issue 11, 2021, Pages 2525-2533]
-
Geopolymer concrete
Parametric Effects on Slump and Compressive Strength Properties of Geopolymer Concrete using Taguchi Method [Volume 34, Issue 3, 2021, Pages 629-635]
-
Geo-polymer Concrete
Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method [Volume 34, Issue 10, 2021, Pages 2351-2359]
-
Geothermal field
Kudryavy Volcano Crater Thick Rocks Electrical Breakdown Study in 50 Hz Electromagnetic Field [Volume 34, Issue 5, 2021, Pages 1371-1380]
-
Geothermal fields
Exploration of Rhenium Volcanogenic Deposit and Technology of Its Development [Volume 34, Issue 4, 2021, Pages 1052-1065]
-
Geothermal Sludge
Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]
-
GFRP Beams
Enhancement of Stiffness in GFRP Beams by Glass Reinforcement [Volume 34, Issue 3, 2021, Pages 615-620]
-
GFRP sheet
Strengthening of RC Beams Using SCC Jacket Consisting of Glass Fiber and Fiber-Silica Fume Composite Gel [Volume 34, Issue 8, 2021, Pages 1923-1939]
-
GLARC slim columns
High-contribution of strip glass waste in buckling-strengthening of slim GLARC columns at once avoiding ASR deterioration problems in concrete materials [Volume 34, Issue 11, 2021, Pages 2452-2466]
-
Glass Fiber Polymer
Experimental Comparison of Different Types of FRP Wrapping in Repairing of RC Deep Beams with Circular Openings [Volume 34, Issue 8, 2021, Pages 1961-1973]
-
Glass fiber reinforced polymer
Strength Capacity Cracks Propagations Deflection and Tensile Enhancement of Reinforced Concrete Beams Warped by Glass Fiber Reinforced Polymer Strips [Volume 34, Issue 5, 2021, Pages 1094-1104]
-
Glass Reinforced Concrete
High-contribution of strip glass waste in buckling-strengthening of slim GLARC columns at once avoiding ASR deterioration problems in concrete materials [Volume 34, Issue 11, 2021, Pages 2452-2466]
-
Gliding Path
Dynamic Response Analysis of a High Glide Ratio Parachute System [Volume 34, Issue 1, 2021, Pages 195-201]
-
Global Damage index (GDI)
Modified Damage Index Calculation Method for Frame-Shear Wall Building Considering Multiple Demand Parameters [Volume 34, Issue 10, 2021, Pages 2294-2301]
-
Goal Programming
A Blood Supply Chain Network with Backup Facilities Considering Blood Groups and Expiration Date: A Real-world Application [Volume 34, Issue 2, 2021, Pages 470-479]
-
Grain Size
Influence of Mould Thickness on Microstructure, Hardness and Wear of AL-Cu Cast Alloys [Volume 34, Issue 8, 2021, Pages 2021-2027]
-
Grasshopper Optimization Algorithm
A Hybrid Modified Grasshopper Optimization Algorithm and Genetic Algorithm to Detect and Prevent DDoS Attacks [Volume 34, Issue 4, 2021, Pages 811-824]
-
Green Closed Loop Supply Chain
A Robust Multi-objective Fuzzy Model for a Green Closed-loop Supply Chain Network under Uncertain Demand and Reliability (A Case Study in Engine Oil Industry) [Volume 34, Issue 12, 2021, Pages 2585-2603]
-
Grey level image
An Efficient Approach for Edge Detection Technique Using Kalman Filter with Artificial Neural Network [Volume 34, Issue 12, 2021, Pages 2604-2610]
-
Grey Relational Analysis
Mathematical Modeling & Multi Response Optimization for Improving Machinability of Alloy Steel Using RSM, GRA and Jaya Algorithm [Volume 34, Issue 9, 2021, Pages 2157-2166]
-
Grey Relational Analysis
Taguchi- Grey relational analysis for Optimizing the Compressive Strength and Porosity of Metakaolin-Based Geopolymer [Volume 34, Issue 11, 2021, Pages 2525-2533]
-
Grey wolf optimization algorithm
Optimization of Dam Reservoir Operation Using Grey Wolf Optimization and Genetic Algorithms (A Case Study of Taleghan Dam) [Volume 34, Issue 7, 2021, Pages 1644-1652]
-
GrÖbner Basis
Private Trajectory Intersection Testing: Is Garbled Circuit Better than Custom Protocols? [Volume 34, Issue 4, 2021, Pages 863-872]
-
Ground motion duration
Effect of intensity measures on the response of a 3D-structure under different ground motion duration [Volume 34, Issue 10, 2021, Pages 2219-2237]
-
Ground settlement
A Numerical Study of the Effect of Tunneling on Surface Settlement and Existing Buildings [Volume 34, Issue 5, 2021, Pages 1085-1093]
-
Growth mechanism of carbon nanotubes
Mass Production and Growth Mechanism of Carbon Nanotubes in Optimized Mechanothermal Method [Volume 34, Issue 10, 2021, Pages 2332-2340]
-
GTD111
The Rejuvenation Heat Treatment of Nickel Base Superalloy Grade GTD111 after Long-Term Service via the Taguchi Method for Optimization [Volume 34, Issue 4, 2021, Pages 956-965]
-
Gypseous soil
Influence of Plastic Fiber on the Geotechnical Properties of Gypseous Soil [Volume 34, Issue 2, 2021, Pages 367-374]
-
Gypseous Soil Behavior
Behavior of Gypseous Soil under Static and Dynamic Loading [Volume 34, Issue 8, 2021, Pages 1882-1887]
-
Gypsum
Essential Improvements in Gypsum Mortar Characteristics [Volume 34, Issue 2, 2021, Pages 319-325]
H
-
Halbach
Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
-
Halbach Array
Evaluation of Linear Permanent Magnet Vernier Machine Topologies for Wave Energy Converters [Volume 34, Issue 2, 2021, Pages 403-413]
-
Halbach Array
Analysis of a New Linear Dual Stator Consequent Pole Halbach Array Flux Reversal Machine [Volume 34, Issue 8, 2021, Pages 2002-2009]
-
Hand-based biometric
Deep Convolutional Neural Network for Finger-Knuckle-Print Recognition [Volume 34, Issue 7, 2021, Pages 1684-1693]
-
Hardness
The Rejuvenation Heat Treatment of Nickel Base Superalloy Grade GTD111 after Long-Term Service via the Taguchi Method for Optimization [Volume 34, Issue 4, 2021, Pages 956-965]
-
Hard Powder and SS304L
Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate [Volume 34, Issue 2, 2021, Pages 480-486]
-
Hardware Implementation
Memristor Crossbar-Based Hardware Implementation of Type-2 Fuzzy Membership Function and On-Chip Learning [Volume 34, Issue 9, 2021, Pages 2180-2188]
-
Harmonic and Voltage unbalanced voltage
Analytical Evaluation of Core Losses, Thermal Modelling and Insulation Lifespan Prediction for Induction Motor in Presence of Harmonic and Voltage Unbalance [Volume 34, Issue 5, 2021, Pages 1213-1224]
-
Hausdorff distance
Improved Object Matching in Multi-Objects Tracking Based On Zernike Moments and Combination of Multiple Similarity Metrics [Volume 34, Issue 6, 2021, Pages 1445-1454]
-
Heat absorption
Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
-
Heat-affected zone
Influence of Immersion Corrosion on Mechanical Properties of AISI 430/AISI 316L Dissimilar Welded Joints [Volume 34, Issue 5, 2021, Pages 1352-1361]
-
Heat-fluid-solid coupling method
Numerical Investigation of the Heat-Fluid Characteristic inside High-Speed Angular Contact Ball Bearing Lubricated with Grease [Volume 34, Issue 5, 2021, Pages 1313-1320]
-
Heat generation
Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
-
Heavy-Duty Engine
Numerical simulation of a heavy-duty diesel engine to evaluate the effect of fuel injection duration on engine performance and emission [Volume 34, Issue 11, 2021, Pages 2442-2451]
-
Helicopter Unmanned Arial Vehicle
Actuator Fault Detection and Isolation for Helicopter Unmanned Arial Vehicle in the Present of Disturbance [Volume 34, Issue 3, 2021, Pages 676-681]
-
Hidden Markov Model
A Novel Method for Forecasting Surface Wind Speed using Wind-direction based on Hierarchical Markov Model [Volume 34, Issue 2, 2021, Pages 414-426]
-
Hidden Markov Model
A Hidden Markov Model for Morphology of Compound Roles in Persian Text Part of Tagging [Volume 34, Issue 11, 2021, Pages 2494-2507]
-
High-Rise Structure
Effect of Foundation Flexibility on the Seismic Performance of a High-Rise Structure under Far-Field and Near-Field Earthquakes [Volume 34, Issue 7, 2021, Pages 1611-1622]
-
High specific surface area
Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]
-
High strength
Structural Behavior of Hollow-core One Way Slabs of High Strength Self-compacting Concrete [Volume 34, Issue 1, 2021, Pages 39-45]
-
High Yield Strength
Study of Bond Strength of Plain Surface Wave Type Configuration Rebars with Concrete: A Comparative Study [Volume 34, Issue 2, 2021, Pages 326-335]
-
Histogram of oriented gradient
Detection of Bikers without Helmet Using Image Texture and Shape Analysis [Volume 34, Issue 3, 2021, Pages 650-655]
-
Hollow-core Slab
Structural Behavior of Hollow-core One Way Slabs of High Strength Self-compacting Concrete [Volume 34, Issue 1, 2021, Pages 39-45]
-
Honeycomb sandwich
Experimental Damage Evaluation of Honeycomb Sandwich with Composite Face Sheets under Impact Load [Volume 34, Issue 4, 2021, Pages 999-1007]
-
Horizontal drain
Simple Slope Stabilization on Quartz Sandstone using Horizontal Drain [Volume 34, Issue 4, 2021, Pages 1046-1051]
-
Hot Metal Gas Forming
Multi-objective Optimization of HMGF Process Parameters for Manufacturing AA6063 Stepped Tubes using FEM-RSM [Volume 34, Issue 5, 2021, Pages 1305-1312]
-
Hot Metal Gas Forming
Numerical analyses of Manufacturing of an AA8111 Pin-shaped Bipolar Plate by Hot Metal Gas Forming [Volume 34, Issue 8, 2021, Pages 1994-2001]
-
HPC
Flexural Strength and Behavioral Study of High-Performance Concrete Beams using Stress-Block Parameters [Volume 34, Issue 11, 2021, Pages 2557-2565]
-
Human biometric
Deep Convolutional Neural Network for Finger-Knuckle-Print Recognition [Volume 34, Issue 7, 2021, Pages 1684-1693]
-
Humidity
Effects of Road Roughness, Aerodynamics, and Weather Conditions on Automotive Wheel Force [Volume 34, Issue 2, 2021, Pages 536-546]
-
Hybrid composite
Waviness Effect of Fiber on Buckling Behavior of Sisal/Carbon Nanotube Reinforced Composites Using Experimental Finite Element Method [Volume 34, Issue 12, 2021, Pages 2617-2623]
-
Hybrid Composites
ModeI fracture toughness of Carbon/glass hybrid comopsite [Volume 34, Issue 11, 2021, Pages 2418-2423]
-
Hybrid Damper
Performance of Reinforced Concrete Shear Wall Equipped with an Innovative Hybrid Damper [Volume 34, Issue 7, 2021, Pages 1632-1643]
-
Hybrid Optimization algorithm
Novel Particle Swarm Optimization Algorithm Based on President Election: Applied to a Renewable Hybrid Power System Controller [Volume 34, Issue 1, 2021, Pages 97-109]
-
Hybrid Power System
Novel Particle Swarm Optimization Algorithm Based on President Election: Applied to a Renewable Hybrid Power System Controller [Volume 34, Issue 1, 2021, Pages 97-109]
-
Hydraulic fracturing
Investigation of the Influence of Pressures and Proppant Mass on the Well Parameters after Hydraulic Fracturing [Volume 34, Issue 4, 2021, Pages 1066-1073]
-
Hydrodynamic pressure
Effect of Hydrodynamic Pressure on Saturated Sand Supporting Liquid Storage Tank During the Earthquake [Volume 34, Issue 5, 2021, Pages 1176-1183]
-
Hydroelasticiy
Seismic Analysis of Double Deck Floating Roofs of Siraf Storage Tanks with Condensate, Light and Heavy Crude Oils [Volume 34, Issue 10, 2021, Pages 2319-2331]
-
Hydrogeology
Simple Slope Stabilization on Quartz Sandstone using Horizontal Drain [Volume 34, Issue 4, 2021, Pages 1046-1051]
-
Hydrophobic
Effect of Silver Clusters Deposition on Wettability and Optical Properties of Diamond-like Carbon Films [Volume 34, Issue 3, 2021, Pages 706-713]
-
Hydrostatic pressure
Single-phase and Two-phase Smoothed Particle Hydrodynamics for Sloshing in the Low Filling Ratio of the Prismatic Tank [Volume 34, Issue 5, 2021, Pages 1345-1351]
-
Hydrothermal Analysis
The application of analytical methods in the investigation effects of Magnetic parameter and Brownian motion on the fluid flow between two equal plates [Volume 34, Issue 10, 2021, Pages 2341-2350]
-
Hydroxyapatite
Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
-
Hyperspectral Image
Supervised and Unsupervised Clustering Based Dimensionality Reduction of Hyperspectral Data [Volume 34, Issue 6, 2021, Pages 1407-1412]
-
Hyperthermia
Towards a Uncertainty Analysis in Thermal Protection using Phase-change Micro/Nano Particles during Hyperthermia [Volume 34, Issue 1, 2021, Pages 263-271]
I
-
Image chroma
Splicing Image Forgery Detection and Localization Based on Color Edge Inconsistency using Statistical Dispersion Measures [Volume 34, Issue 2, 2021, Pages 443-451]
-
Image Hashing
A Three-stage Filtering Approach for Face Recognition [Volume 34, Issue 8, 2021, Pages 1856-1864]
-
Image Segmentation
Splicing Image Forgery Detection and Localization Based on Color Edge Inconsistency using Statistical Dispersion Measures [Volume 34, Issue 2, 2021, Pages 443-451]
-
Image Watermarking
Proposing a New Image Watermarking Method Using Shearlet Transform and Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 843-853]
-
Impact
Experimental Damage Evaluation of Honeycomb Sandwich with Composite Face Sheets under Impact Load [Volume 34, Issue 4, 2021, Pages 999-1007]
-
Impacting Factor
An Application of Fuzzy-VIKOR Method in Environmental Impact Assessment of the Boog Mine Southeast of Iran [Volume 34, Issue 6, 2021, Pages 1545-1556]
-
Impact resistance
Axial Compression Performance of Square Tube Filled with Foam Aluminum [Volume 34, Issue 5, 2021, Pages 1336-1344]
-
Incremental Approach
The Construction of Scalable Decision Tree based on Fast Splitting and J-Max Pre-Pruning on Large Datasets [Volume 34, Issue 8, 2021, Pages 1810-1818]
-
Incremental dynamic analysis (IDA)
Probabilistic Seismic Assessment of Moment Resisting Steel Buildings Considering Soft-story and Torsional Irregularities [Volume 34, Issue 11, 2021, Pages 2476-2493]
-
Induction
Adpative Neuro-Fuzzy Inference System Estimation Propofol dose in the induction phase during anesthesia; case study [Volume 34, Issue 9, 2021, Pages 2148-2156]
-
Induction motor
Analytical Evaluation of Core Losses, Thermal Modelling and Insulation Lifespan Prediction for Induction Motor in Presence of Harmonic and Voltage Unbalance [Volume 34, Issue 5, 2021, Pages 1213-1224]
-
Induction motor
Analyzing Vibration as a Useful Domain for Getting Bearing Fault Signals in Induction Motors [Volume 34, Issue 8, 2021, Pages 2010-2020]
-
Industrial Robot
Fused Deposition Modeling of an Aircraft Wing using Industrial Robot with Non-linear Tool Path Generation [Volume 34, Issue 1, 2021, Pages 272-282]
-
Industry 4.0
Assessment the Cost-effectiveness of Information Support for the Business Processes of a Virtual Machine-building Enterprise in the Framework of Industry 4.0 [Volume 34, Issue 1, 2021, Pages 171-176]
-
Injection Duration
Numerical simulation of a heavy-duty diesel engine to evaluate the effect of fuel injection duration on engine performance and emission [Volume 34, Issue 11, 2021, Pages 2442-2451]
-
Insulation Lifetime
Analytical Evaluation of Core Losses, Thermal Modelling and Insulation Lifespan Prediction for Induction Motor in Presence of Harmonic and Voltage Unbalance [Volume 34, Issue 5, 2021, Pages 1213-1224]
-
Integer programming
A Mathematical Model for a Blood Supply Chain Network with the Robust Fuzzy Possibilistic Programming Approach: A Case Study at Namazi Hospital [Volume 34, Issue 6, 2021, Pages 1493-1502]
-
Integrated Production-Distribution Planning
A Bi-objective Robust Optimization Model for an Integrated Production-distribution Problem of Perishable Goods with Demand Improvement Strategies: A Case Study [Volume 34, Issue 7, 2021, Pages 1766-1777]
-
Intelligent Loop Based Artificial Neural Network (ILANN)
Intrusion Detection in Cyber-Physical Layer of Smart Grid Using Intelligent Loop Based Artificial Neural Network Technique [Volume 34, Issue 5, 2021, Pages 1250-1256]
-
Intelligent Traffic Light Scheduling
Improvement of Multi-agent Routing Guidance with an Intelligent Traffic Light Scheduling and the Ability to Select Intermediate Destinations [Volume 34, Issue 4, 2021, Pages 854-862]
-
Intensity Measure
Effect of intensity measures on the response of a 3D-structure under different ground motion duration [Volume 34, Issue 10, 2021, Pages 2219-2237]
-
Interior permanent magnet machine
Multi-objective optimization design and Verification of Interior PMSG Based on Finite Element Analysis and Taguchi method [Volume 34, Issue 9, 2021, Pages 2097-2106]
-
Intermediate Destinations Selection
Improvement of Multi-agent Routing Guidance with an Intelligent Traffic Light Scheduling and the Ability to Select Intermediate Destinations [Volume 34, Issue 4, 2021, Pages 854-862]
-
Internal curing
Effect of Super absorbent polymer on workability, strength and durability of Self consolidating concrete [Volume 34, Issue 5, 2021, Pages 1118-1123]
-
Internet of Things
Routing Protocols for IOT Applications based on Distributed Learning [Volume 34, Issue 4, 2021, Pages 825-831]
-
Interquartile range (IQR) criterion
Splicing Image Forgery Detection and Localization Based on Color Edge Inconsistency using Statistical Dispersion Measures [Volume 34, Issue 2, 2021, Pages 443-451]
-
Interval Data
Extreme Learning Machine based Pattern Classifiers for Symbolic Interval Data [Volume 34, Issue 11, 2021, Pages 2545-2556]
-
Intravenous Anesthetic
Adpative Neuro-Fuzzy Inference System Estimation Propofol dose in the induction phase during anesthesia; case study [Volume 34, Issue 9, 2021, Pages 2148-2156]
-
Investment Projects
System of Comprehensive Assessment of Project Risks in the Energy Industry [Volume 34, Issue 7, 2021, Pages 1778-1784]
-
Ionic Liquid
Optimization of Green Technique Develop for Europium (III) Extraction by using Phosphonium Ionic Liquid and Central Composite Design Approach [Volume 34, Issue 2, 2021, Pages 508-516]
-
Iranian electricity market
Provision of an Optimal Strategy to Forecast the Prices Set by the Electricity Market in the Competitive Iranian Energy Market in Fall [Volume 34, Issue 1, 2021, Pages 149-161]
-
Islanded Microgrid
A Novel Control Strategy of an Islanded Microgrid Based on Virtual Flux Droop Control and Direct Flux Fuzzy Control [Volume 34, Issue 5, 2021, Pages 1274-1283]
-
Islanded performance
Stability Analysis of AC/DC Microgrids in Island Mode [Volume 34, Issue 7, 2021, Pages 1750-1765]
-
Isolated intersection
Modeling the traffic signal control system at an isolated intersection using queuing systems [Volume 34, Issue 9, 2021, Pages 2077-2086]
J
-
JAYA Algorithm
Mathematical Modeling & Multi Response Optimization for Improving Machinability of Alloy Steel Using RSM, GRA and Jaya Algorithm [Volume 34, Issue 9, 2021, Pages 2157-2166]
-
Jiles-Atherton Model
A New Simple Method to Avoid Maloperation of Transformer Restricted Earth Fault Relay during External Fault Events [Volume 34, Issue 9, 2021, Pages 2070-2076]
-
Joint
FE analysis of single-lap adhesive joints with tapered adherends [Volume 34, Issue 10, 2021, Pages 2213-2218]
-
Joule loss
An Improvement on Slot Configuration Structure of a Low-Speed Surface-Mounted Permanent Magnet Synchronous Generator with a Wound Cable Winding [Volume 34, Issue 9, 2021, Pages 2045-2052]
K
-
Kalman filter algorithm
An Efficient Approach for Edge Detection Technique Using Kalman Filter with Artificial Neural Network [Volume 34, Issue 12, 2021, Pages 2604-2610]
-
Key stratum
The Influence of Overburden Structure on Mine Ground Pressure Appearance in Working Face with Super-large Mining Height: a Case Study in Shendong Mining Area [Volume 34, Issue 1, 2021, Pages 283-291]
-
Keywords: Loss allocation
Graph Theoretic Loss Allocation Method for Microgrids having Variable Generation [Volume 34, Issue 9, 2021, Pages 2060-2069]
-
Kinetic Models
Efficient Removal of Copper Ion from Aqueous Solution using Crosslinked Chitosan Grafted with Polyaniline [Volume 34, Issue 2, 2021, Pages 305-312]
-
Kinetics
Effect of Critical Variables on Air Dense Medium Fluidized Bed Coal Drying Efficiency and Kinetics [Volume 34, Issue 5, 2021, Pages 1362-1370]
-
Kink Energy
Design of Area Efficient Single Bit Comparator Circuit using Quantum dot Cellular Automata and its Digital Logic Gates Realization [Volume 34, Issue 12, 2021, Pages 2672-2678]
-
Kinodynamic path planning
Any-time randomized kinodynamic path planning algorithm in dynamic environments with application to quadrotor [Volume 34, Issue 10, 2021, Pages 2360-2370]
-
K-means Clustering
Supervised and Unsupervised Clustering Based Dimensionality Reduction of Hyperspectral Data [Volume 34, Issue 6, 2021, Pages 1407-1412]
-
Korkinsk Brown Coal
Korkinsk Brown Coal Open Pit as a Case Study of Endogenous Fires [Volume 34, Issue 1, 2021, Pages 293-304]
L
-
Laboratory study
Retrofitting of RC Beams using Reinforced Self-compacting Concrete Jackets Containing Aluminum Oxide Nanoparticles [Volume 34, Issue 5, 2021, Pages 1195-1212]
-
Langmuir
Synergetic photocatalytic and adsorptive removals of metanil yellow using TiO2/grass-derived cellulose/chitosan (TiO2/GC/CH) film composite [Volume 34, Issue 8, 2021, Pages 1827-1836]
-
Language Identification
A Signal Processing Method for Text Language Identification [Volume 34, Issue 6, 2021, Pages 1413-1418]
-
Large dataset
The Construction of Scalable Decision Tree based on Fast Splitting and J-Max Pre-Pruning on Large Datasets [Volume 34, Issue 8, 2021, Pages 1810-1818]
-
Large Datasets
A Three-stage Filtering Approach for Face Recognition [Volume 34, Issue 8, 2021, Pages 1856-1864]
-
Large-scale Specimens
Large-Scale Experimental Study on Collapsible Soil Improvement Using Encased Stone Columns [Volume 34, Issue 5, 2021, Pages 1145-1155]
-
Laser Cladding
Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate [Volume 34, Issue 2, 2021, Pages 480-486]
-
Latency
Energy-aware task scheduling in cloud compting based on discrete pathfinder algorithm [Volume 34, Issue 9, 2021, Pages 2124-2136]
-
Layered Soils
Effect of Foundation Flexibility on the Seismic Performance of a High-Rise Structure under Far-Field and Near-Field Earthquakes [Volume 34, Issue 7, 2021, Pages 1611-1622]
-
Learning
Routing Protocols for IOT Applications based on Distributed Learning [Volume 34, Issue 4, 2021, Pages 825-831]
-
Least Square Method (LSM)
Development of a Non-Iterative Macromodeling Technique by Data Integration and Least Square Method [Volume 34, Issue 11, 2021, Pages 2408-2417]
-
Lifetime testing
Designing Exponentially Weighted Moving Average Control Charts under Failure Censoring Reliability Tests [Volume 34, Issue 11, 2021, Pages 2398-2407]
-
Limited data
A Life Clustering Framework for Prognostics of Gas Turbine Engines under Limited Data Situations [Volume 34, Issue 3, 2021, Pages 728-736]
-
Linear Machine
Evaluation of Linear Permanent Magnet Vernier Machine Topologies for Wave Energy Converters [Volume 34, Issue 2, 2021, Pages 403-413]
-
Linear Machine
Analysis of a New Linear Dual Stator Consequent Pole Halbach Array Flux Reversal Machine [Volume 34, Issue 8, 2021, Pages 2002-2009]
-
Linear Quadratic Regulator Algorithm
The Effects of Mathematical Modelling of Magneto-rheological Dampers on Its Control Performance: A Comparative Study Between the Modified Bouc-Wen and the Maxwell Nonlinear Slider Hysteretic Models [Volume 34, Issue 5, 2021, Pages 1105-1117]
-
Load Balancing
Improving the Load Balancing and Dynamic Placement of Virtual Machines in Cloud Computing using Particle Swarm Optimization Algorithm [Volume 34, Issue 6, 2021, Pages 1419-1429]
-
Load Carrying Capacity
Numerical Investigation of Response of the Post-Tensioned Tapered Steel Beams with Shape Memory Alloy Tendons [Volume 34, Issue 4, 2021, Pages 782-792]
-
Load Frequency Control
A Disturbance Observer Based Fuzzy Feedforward Proportional Integral Load Frequency Control of Microgrids [Volume 34, Issue 7, 2021, Pages 1694-1702]
-
Local binary pattern
Detection of Bikers without Helmet Using Image Texture and Shape Analysis [Volume 34, Issue 3, 2021, Pages 650-655]
-
Local community
Soft System Methodology: Project vs Local Community Interests in Project Social Conflict [Volume 34, Issue 9, 2021, Pages 2107-2115]
-
Local Sensitive Hashing
A Three-stage Filtering Approach for Face Recognition [Volume 34, Issue 8, 2021, Pages 1856-1864]
-
Local Variance
Detection of Bikers without Helmet Using Image Texture and Shape Analysis [Volume 34, Issue 3, 2021, Pages 650-655]
-
Longitudinal Friction Coefficient
Experimental Analysis for Determination of Longitudinal Friction Coefficient Function in Braking Tractor Semi-trailer [Volume 34, Issue 7, 2021, Pages 1799-1803]
-
Longitudinal Slip Coefficient
Experimental Analysis for Determination of Longitudinal Friction Coefficient Function in Braking Tractor Semi-trailer [Volume 34, Issue 7, 2021, Pages 1799-1803]
-
Low-rank matrix
Prediction of Drug-Target Protein Interaction Based on the Minimization of Weighted Nuclear Norm and Similarity Graph between Drugs and Target Proteins [Volume 34, Issue 7, 2021, Pages 1736-1742]
M
-
Machine Breakdowns
Robust and Stable Flow Shop Scheduling Problem under Uncertain Processing Times and Machines’ Disruption [Volume 34, Issue 4, 2021, Pages 935-947]
-
Machine Learning
Gear Fault Detection using Machine Learning Techniques- A Simulation-driven Approach [Volume 34, Issue 1, 2021, Pages 212-223]
-
Macromodeling
Development of a Non-Iterative Macromodeling Technique by Data Integration and Least Square Method [Volume 34, Issue 11, 2021, Pages 2408-2417]
-
Magnetic
Design and Optimization of Halbach Permanent Magnet Array with Rectangle Section and Trapezoid Section [Volume 34, Issue 11, 2021, Pages 2379-2386]
-
Magnetic Equivalent Circuit
Cogging Torque Minimization in Transverse Flux Permanent Magnet Generators using Two-step Axial Permanent Magnet Segmentation for Direct Drive Wind Turbine Application [Volume 34, Issue 4, 2021, Pages 908-918]
-
Magnetic Flux Barrier
Design Procedure of an Outer Rotor Synchronous Reluctance Machine for Scooter Application [Volume 34, Issue 3, 2021, Pages 656-666]
-
Magnetic Flux Leakage
Application of Artificial Neural Network and Multi-magnetic NDE Methods to Determine Mechanical Properties of Plain Carbon Steels Subjected to Tempering Treatment [Volume 34, Issue 4, 2021, Pages 919-927]
-
Magnetic hysteresis loop
Application of Artificial Neural Network and Multi-magnetic NDE Methods to Determine Mechanical Properties of Plain Carbon Steels Subjected to Tempering Treatment [Volume 34, Issue 4, 2021, Pages 919-927]
-
Magnetic orientation
Analysis of a New Linear Dual Stator Consequent Pole Halbach Array Flux Reversal Machine [Volume 34, Issue 8, 2021, Pages 2002-2009]
-
Magnetic properties
Electromagnetic Wave Absorption Properties of Barium Ferrite/Reduced Graphene Oxide Nanocomposites [Volume 34, Issue 6, 2021, Pages 1503-1511]
-
Magneto-rheological Damper
The Effects of Mathematical Modelling of Magneto-rheological Dampers on Its Control Performance: A Comparative Study Between the Modified Bouc-Wen and the Maxwell Nonlinear Slider Hysteretic Models [Volume 34, Issue 5, 2021, Pages 1105-1117]
-
Majority Voter
Design of Area Efficient Single Bit Comparator Circuit using Quantum dot Cellular Automata and its Digital Logic Gates Realization [Volume 34, Issue 12, 2021, Pages 2672-2678]
-
Marine Energy Conversion System
An Improvement on Slot Configuration Structure of a Low-Speed Surface-Mounted Permanent Magnet Synchronous Generator with a Wound Cable Winding [Volume 34, Issue 9, 2021, Pages 2045-2052]
-
Marketing
Semi-Augmented Reality, a Novel Approach to Improve Customer Safety in the Pre-sale Process of Under Construction Buildings [Volume 34, Issue 10, 2021, Pages 2198-2205]
-
Mass production of carbon nanotubes
Mass Production and Growth Mechanism of Carbon Nanotubes in Optimized Mechanothermal Method [Volume 34, Issue 10, 2021, Pages 2332-2340]
-
Maturity model
The Effects of BIM Maturity Level on the 4D Simulation Performance: An Empirical Study [Volume 34, Issue 3, 2021, Pages 606-614]
-
Maxwell Nonlinear Slider Model
The Effects of Mathematical Modelling of Magneto-rheological Dampers on Its Control Performance: A Comparative Study Between the Modified Bouc-Wen and the Maxwell Nonlinear Slider Hysteretic Models [Volume 34, Issue 5, 2021, Pages 1105-1117]
-
Mean Value Engine Model
Investigating behavior of VLCC ship’s diesel engine on handling stormy waters [Volume 34, Issue 8, 2021, Pages 1845-1855]
-
Mechanical Behaviour of Materials
Effect of Additional Zirconia on Fracture Mechanics of Bioactive Glass-ceramics Using Digital Image Correlation [Volume 34, Issue 9, 2021, Pages 2053-2059]
-
Mechanical properties
Durability and Mechanical Properties of Self-compacting Concretes with Combined Use of Aluminium Oxide Nanoparticles and Glass Fiber [Volume 34, Issue 1, 2021, Pages 26-38]
-
Mechanical properties
Behavior and Strength of Steel Fiber Reinforced Self-compacting Concrete Columns Wrapped by Carbon Fiber Reinforced Polymers Strips [Volume 34, Issue 2, 2021, Pages 382-392]
-
Mechanical properties
Mechanical Properties of Ultra-high Performance Concrete Reinforced by Glass Fibers under Accelerated Aging [Volume 34, Issue 5, 2021, Pages 1074-1084]
-
Mechanical properties
Evaluation of the Combined Use of Waste Paper Sludge Ash and Nanomaterials on Mechanical Properties and Durability of High Strength Concretes [Volume 34, Issue 7, 2021, Pages 1653-1666]
-
Mechanothermal method
Mass Production and Growth Mechanism of Carbon Nanotubes in Optimized Mechanothermal Method [Volume 34, Issue 10, 2021, Pages 2332-2340]
-
Memristor-Crossbar Structures
Memristor Crossbar-Based Hardware Implementation of Type-2 Fuzzy Membership Function and On-Chip Learning [Volume 34, Issue 9, 2021, Pages 2180-2188]
-
MEMS
A new wide tunability MEMS based variable capacitor using two separate electro-static vertical comb drive actuators [Volume 34, Issue 11, 2021, Pages 2534-2544]
-
Meta-heuristic
Energy-aware task scheduling in cloud compting based on discrete pathfinder algorithm [Volume 34, Issue 9, 2021, Pages 2124-2136]
-
Meta-heuristic
Proposing a model for a resilient supply chain: A meta-heuristic algorithm [Volume 34, Issue 12, 2021, Pages 2566-2577]
-
Metaheuristic Approach Multi
Squirrel Search Optimization for Non-convex Multi-area Economic Dispatch [Volume 34, Issue 1, 2021, Pages 120-127]
-
Metakaolin
Mechanical Properties of Ultra-high Performance Concrete Reinforced by Glass Fibers under Accelerated Aging [Volume 34, Issue 5, 2021, Pages 1074-1084]
-
Metakaolin
A Novel Lightweight Phase-changing Cooling Roof Tile [Volume 34, Issue 6, 2021, Pages 1398-1406]
-
Metakaolin
Taguchi- Grey relational analysis for Optimizing the Compressive Strength and Porosity of Metakaolin-Based Geopolymer [Volume 34, Issue 11, 2021, Pages 2525-2533]
-
Metal Matrix Composite Gears
The Prediction of Stress and Strain Behaviors in Composite Gears using FEM [Volume 34, Issue 2, 2021, Pages 556-563]
-
Metal organic framework
Fabrication and evaluation of controlled release of Doxorubicin loaded UiO-66-NH2 metal organic frameworks [Volume 34, Issue 8, 2021, Pages 1874-1881]
-
Methylene blue
Synthesis and Characterization of Photocatalytic Activity of Hematite/ Cobalt Oxide/ Graphite Nanocomposites [Volume 34, Issue 1, 2021, Pages 177-183]
-
Micro-grid
An Improved Hierarchical Control Structure for Robust Microgrid Operation and Seamless Mode Transfer under Linear and Nonlinear Loads conditions [Volume 34, Issue 9, 2021, Pages 2167-2179]
-
Microgrids
A New Consensus-based Distributed Adaptive Control for Islanded Microgrids [Volume 34, Issue 7, 2021, Pages 1725-1735]
-
Microgrid stability
Stability Analysis of AC/DC Microgrids in Island Mode [Volume 34, Issue 7, 2021, Pages 1750-1765]
-
Micro-hardness
Laser Cladding of PAC 718, Tribaloy T-700 and METCO 41 C Hard Facing Powders on AISI SS 304L Substrate [Volume 34, Issue 2, 2021, Pages 480-486]
-
Micro-hardness
Direct Drive Friction Welding Joint Strength of AISI 304 [Volume 34, Issue 3, 2021, Pages 714-720]
-
Micro/Nano Particles
Towards a Uncertainty Analysis in Thermal Protection using Phase-change Micro/Nano Particles during Hyperthermia [Volume 34, Issue 1, 2021, Pages 263-271]
-
Microstructure
The Rejuvenation Heat Treatment of Nickel Base Superalloy Grade GTD111 after Long-Term Service via the Taguchi Method for Optimization [Volume 34, Issue 4, 2021, Pages 956-965]
-
Mild Steel Rebar
Study of Bond Strength of Plain Surface Wave Type Configuration Rebars with Concrete: A Comparative Study [Volume 34, Issue 2, 2021, Pages 326-335]
-
Mine ground pressure appearance
The Influence of Overburden Structure on Mine Ground Pressure Appearance in Working Face with Super-large Mining Height: a Case Study in Shendong Mining Area [Volume 34, Issue 1, 2021, Pages 283-291]
-
Mine reclamation
Development of open-pit mine reclamation cost estimation models: A regression-based approach [Volume 34, Issue 11, 2021, Pages 2467-2475]
-
Mine reclamation cost estimation
Development of open-pit mine reclamation cost estimation models: A regression-based approach [Volume 34, Issue 11, 2021, Pages 2467-2475]
-
Minimum quantity lubricant
Effect of Cutting Environment and Swept Angle Selection in Milling Operation [Volume 34, Issue 12, 2021, Pages 2578-2584]
-
Minimum Quantity lubrication
Mathematical Modeling & Multi Response Optimization for Improving Machinability of Alloy Steel Using RSM, GRA and Jaya Algorithm [Volume 34, Issue 9, 2021, Pages 2157-2166]
-
Mining
Evaluating the Efficiency of Coal Loading Process by Simulating the Process of Loading onto the Face Conveyor with a Shearer with an Additional Share [Volume 34, Issue 7, 2021, Pages 1804-1809]
-
Mobile marketing
Effect of motivation, opportunity and ability on human resources information security management considering the roles of Attitudinal, behavioral and organizational factors [Volume 34, Issue 12, 2021, Pages 2624-2635]
-
Modal Pushover Analysis
Blast Demand Estimation of RC-Moment-Resisting Frames using a Proposed Multi-modal Adaptive Pushover Analysis Procedure [Volume 34, Issue 1, 2021, Pages 46-55]
-
Modeling
Optimization of Thermal Decomposition Conditions of Bone to Achieve the Highest Percentage of Crystalline Phase in Bone Char using Gene Expression Programming and Artificial Neural Network [Volume 34, Issue 1, 2021, Pages 184-194]
-
Modeling
An Improved Modeling of Parkinson’s Tremor and Investigation of Some Approaches to Remove this Symptom [Volume 34, Issue 5, 2021, Pages 1269-1273]
-
Modeling
Evaluating the Efficiency of Coal Loading Process by Simulating the Process of Loading onto the Face Conveyor with a Shearer with an Additional Share [Volume 34, Issue 7, 2021, Pages 1804-1809]
-
Model predictive Control
A New Recurrent Radial Basis Function Network-based Model Predictive Control for a Power Plant Boiler Temperature Control [Volume 34, Issue 3, 2021, Pages 667-675]
-
Model Predictive Voltage Control
A Novel Model Predictive Voltage Control of Brushless Cascade Doubly-Fed Induction Generator in Stand-Alone Power Generation System [Volume 34, Issue 5, 2021, Pages 1239-1249]
-
Modified Bag-of-words
Human Action Recognition using Prominent Camera [Volume 34, Issue 2, 2021, Pages 427-432]
-
Modified DDSRF
Power Quality Improvement in Microgrids using STATCOM under Unbalanced Voltage Conditions [Volume 34, Issue 6, 2021, Pages 1455-1467]
-
Modulus strength
Microstructure and mechanical properties of PA6/NBR nanocomposites fabricated by friction stir processing [Volume 34, Issue 10, 2021, Pages 2371-2378]
-
Moment-field
Orthotropic Coefficients and Continuity Factors of Reinforced Concrete Slabs Supported on 3-sides [Volume 34, Issue 2, 2021, Pages 375-381]
-
Moment-Resisting Frames
Robust Design of Reinforced Concrete Moment-Resisting Frames [Volume 34, Issue 10, 2021, Pages 2238-2247]
-
Monte Carlo Method
System of Comprehensive Assessment of Project Risks in the Energy Industry [Volume 34, Issue 7, 2021, Pages 1778-1784]
-
Morphological filter
A study on the modified algorithm for image processing in Tracking Seam Welding [Volume 34, Issue 8, 2021, Pages 1913-1922]
-
Mortar
Essential Improvements in Gypsum Mortar Characteristics [Volume 34, Issue 2, 2021, Pages 319-325]
-
Multi-agent routing
Improvement of Multi-agent Routing Guidance with an Intelligent Traffic Light Scheduling and the Ability to Select Intermediate Destinations [Volume 34, Issue 4, 2021, Pages 854-862]
-
Multi-body System
Dynamic Response Analysis of a High Glide Ratio Parachute System [Volume 34, Issue 1, 2021, Pages 195-201]
-
Multi-Conductor Transmission Line Model
Multi-Conductor Transmission Line Model of Split-Winding Transformer for Frequency Response and Disk-to-Disk Fault Analysis [Volume 34, Issue 6, 2021, Pages 1486-1492]
-
Multi-mode Adaptive Pushover
Blast Demand Estimation of RC-Moment-Resisting Frames using a Proposed Multi-modal Adaptive Pushover Analysis Procedure [Volume 34, Issue 1, 2021, Pages 46-55]
-
Multimode approch
Non-linear forced vibration analysis of piezoelectric functionally graded beams in thermal environment. [Volume 34, Issue 11, 2021, Pages 2387-2397]
-
Multi-nomenclature production
Assessment the Cost-effectiveness of Information Support for the Business Processes of a Virtual Machine-building Enterprise in the Framework of Industry 4.0 [Volume 34, Issue 1, 2021, Pages 171-176]
-
Multi-Objective Optimization
Multi-objective Optimal Design of Gas-fired Heater Based on Modified Design Model of Fired Heater Taking into Account Exergy, Economic and Environmental Factors [Volume 34, Issue 7, 2021, Pages 1785-1798]
-
Multi-Objective Optimization
Multi objective optimization of multi-hole orifices using FSI analysis and NSGA II algorithm [Volume 34, Issue 8, 2021, Pages 2038-2044]
-
Multi-objective Particle swarm optimization
Voltage Stability Improvement in Optimal Placement of Voltage Regulators and Capacitor Banks Based on FSM and MMOPSO Approach [Volume 34, Issue 4, 2021, Pages 881-890]
-
Multi-objects Tracking
Improved Object Matching in Multi-Objects Tracking Based On Zernike Moments and Combination of Multiple Similarity Metrics [Volume 34, Issue 6, 2021, Pages 1445-1454]
-
Multiphase Sinusoidal Oscillator
Dual Output Voltage Differencing Buffered Amplifier Based Active -C Multiphase Sinusoidal Oscillator [Volume 34, Issue 6, 2021, Pages 1438-1444]
-
Multi response problems
Taguchi- Grey relational analysis for Optimizing the Compressive Strength and Porosity of Metakaolin-Based Geopolymer [Volume 34, Issue 11, 2021, Pages 2525-2533]
-
Multi-storey
Seismic Vulnerability Studies of a G+17 storey building in Abu Dhabi - UAE using Fragility Curves [Volume 34, Issue 5, 2021, Pages 1167-1175]
-
Multi-walled carbon nanotubes
Mass Production and Growth Mechanism of Carbon Nanotubes in Optimized Mechanothermal Method [Volume 34, Issue 10, 2021, Pages 2332-2340]
N
-
Najaf city
Effect of Matric Suction on Deformation of Gypseous Sand Using Modified Oedometer [Volume 34, Issue 12, 2021, Pages 2636-2641]
-
Nanobeams
Size-dependent Vibration Analysis of Stepped Nanobeams Based on Surface Elasticity Theory [Volume 34, Issue 3, 2021, Pages 744-749]
-
Nanocomposite
Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
-
Nanocomposite
Microstructure and mechanical properties of PA6/NBR nanocomposites fabricated by friction stir processing [Volume 34, Issue 10, 2021, Pages 2371-2378]
-
Nanocomposite film
Experimental Study of Polyvinyl Alcohol Nanocomposite Film Reinforced by Cellulose Nanofibers from Agave Cantala [Volume 34, Issue 4, 2021, Pages 987-998]
-
Nanofluid
Magnetohydrodynamic (MHD) Flow in a Channel Including a Rotating Cylinder [Volume 34, Issue 1, 2021, Pages 224-233]
-
Nanofluid
A neural network approach to estimate non-Newtonian behavior of nanofluid phase change material containing mesoporous silica particles [Volume 34, Issue 8, 2021, Pages 1974-1981]
-
Nano-material
Mechanical Behaviour of Nano-material (Al2O3) Stabilized Soft Soil [Volume 34, Issue 3, 2021, Pages 636-643]
-
Nanoparticle
Synergetic photocatalytic and adsorptive removals of metanil yellow using TiO2/grass-derived cellulose/chitosan (TiO2/GC/CH) film composite [Volume 34, Issue 8, 2021, Pages 1827-1836]
-
Nano-textured
Design and Analysis of High Efficiency Perovskite Solar Cells with Light Trapping Nano-textured Substrates [Volume 34, Issue 4, 2021, Pages 873-880]
-
Naproxen
Spectrophotometric Determination of Naproxen Using Chitosan Capped Silver Nanoparticles in Pharmaceutical Formulation [Volume 34, Issue 7, 2021, Pages 1576-1585]
-
Natural gas
Sensitivity Analysis on Thermal Performance of Gas Heater with Finned and Finless Tubes using Characteristics-based Method [Volume 34, Issue 6, 2021, Pages 1537-1544]
-
Navier-Stokes's equations
Sensitivity Analysis on Thermal Performance of Gas Heater with Finned and Finless Tubes using Characteristics-based Method [Volume 34, Issue 6, 2021, Pages 1537-1544]
-
Near-field
Effect of Foundation Flexibility on the Seismic Performance of a High-Rise Structure under Far-Field and Near-Field Earthquakes [Volume 34, Issue 7, 2021, Pages 1611-1622]
-
Needle Insertion
Finite Element Simulation and Experimental Test of Ovine Corneal Tissue Cutting Process in Cataract Surgery Operation [Volume 34, Issue 5, 2021, Pages 1321-1328]
-
Network Lifetime
Prolong Stability Period in Node Pairing Protocol for Wireless Sensor Networks [Volume 34, Issue 12, 2021, Pages 2679-2687]
-
News Clustering
A Two-Level Semi-supervised Clustering Technique for News Articles [Volume 34, Issue 12, 2021, Pages 2648-2657]
-
Nitrogen Starvation
Nitrogen Starvation Effect Versus its Excess on the Performance of Arthrospira maxima in Zarrouk’s Medium [Volume 34, Issue 7, 2021, Pages 1557-1568]
-
NLTHA
Modified Damage Index Calculation Method for Frame-Shear Wall Building Considering Multiple Demand Parameters [Volume 34, Issue 10, 2021, Pages 2294-2301]
-
Nodemcu
Operating Wheelchair Using Flex Sensor [Volume 34, Issue 7, 2021, Pages 1703-1709]
-
Noise
Employing the Empirical Mode Decomposition to Denoise the Random Telegraph Noise [Volume 34, Issue 1, 2021, Pages 90-96]
-
Non-destructive tests
A study on the modified algorithm for image processing in Tracking Seam Welding [Volume 34, Issue 8, 2021, Pages 1913-1922]
-
Non-idealities
Dual Output Voltage Differencing Buffered Amplifier Based Active -C Multiphase Sinusoidal Oscillator [Volume 34, Issue 6, 2021, Pages 1438-1444]
-
Non-linear analysis
Robust Design of Reinforced Concrete Moment-Resisting Frames [Volume 34, Issue 10, 2021, Pages 2238-2247]
-
Nonlinear analysis
Sensitivity Analysis of Behavior of Simple Trapezoidal Steel Plates to Introduce a New Yielding Damper [Volume 34, Issue 10, 2021, Pages 2302-2312]
-
Non-linear axial vibrations
Non-linear Axial Vibrations of Composite Drill Strings Considering Interaction of Roller Cone Bit and Polycrystalline Diamond Compact Bit with Rock [Volume 34, Issue 4, 2021, Pages 1016-1023]
-
Nonlinear controller
Stability Analysis of AC/DC Microgrids in Island Mode [Volume 34, Issue 7, 2021, Pages 1750-1765]
-
Nonlinear dynamic analysis
Effect of intensity measures on the response of a 3D-structure under different ground motion duration [Volume 34, Issue 10, 2021, Pages 2219-2237]
-
Nonlinear Dynamic Loads
Experimental Investigation of the Change of Elastic Moduli of Clastic Rocks under Nonlinear Loading [Volume 34, Issue 3, 2021, Pages 750-755]
-
Nonlinear Instantaneous Optimal Control
The Effects of Mathematical Modelling of Magneto-rheological Dampers on Its Control Performance: A Comparative Study Between the Modified Bouc-Wen and the Maxwell Nonlinear Slider Hysteretic Models [Volume 34, Issue 5, 2021, Pages 1105-1117]
-
Nonlinear loads
An Improved Hierarchical Control Structure for Robust Microgrid Operation and Seamless Mode Transfer under Linear and Nonlinear Loads conditions [Volume 34, Issue 9, 2021, Pages 2167-2179]
-
Nonlinear Model
Robust Three Stage Central Difference Kalman Filter for Helicopter Unmanned Aerial Vehicle Actuators Fault Estimation [Volume 34, Issue 5, 2021, Pages 1290-1296]
-
Nonlinear response history analysis
Blast Demand Estimation of RC-Moment-Resisting Frames using a Proposed Multi-modal Adaptive Pushover Analysis Procedure [Volume 34, Issue 1, 2021, Pages 46-55]
-
Non-Newtonian
A neural network approach to estimate non-Newtonian behavior of nanofluid phase change material containing mesoporous silica particles [Volume 34, Issue 8, 2021, Pages 1974-1981]
-
NP-hard problem
Proposing a model for a resilient supply chain: A meta-heuristic algorithm [Volume 34, Issue 12, 2021, Pages 2566-2577]
-
Numerical modeling
A Numerical Study of the Effect of Tunneling on Surface Settlement and Existing Buildings [Volume 34, Issue 5, 2021, Pages 1085-1093]
-
Numerical modelling
Performance of Reinforced Concrete Shear Wall Equipped with an Innovative Hybrid Damper [Volume 34, Issue 7, 2021, Pages 1632-1643]
-
Numerical Study
Numerical Study on Flexural Behavior of Concrete Beams Strengthened with Fiber Reinforced Cementitious Matrix Considering Different Concrete Compressive Strength and Steel Reinforcement Ratio [Volume 34, Issue 4, 2021, Pages 793-802]
-
Nusselt Number
Experimental Investigation on the Effect a Rotational Shaft on the Thermal Behavior of a Circular Tube under Constant Heat Flux [Volume 34, Issue 4, 2021, Pages 1008-1015]
O
-
Objective Function
Objective Functions for the Optimization of an Ultra Wideband Antenna [Volume 34, Issue 7, 2021, Pages 1743-1749]
-
OFDM Sparse Channel Estimation
A General Framework for Estimating Channel of Orthogonal Frequency Division Multiplexing Systems by Utilizing Sparse Representation [Volume 34, Issue 6, 2021, Pages 1475-1485]
-
Oil Well Cement
Study of Bonding Strength at Salt-cement Interface During Cementation of Salt Layers [Volume 34, Issue 2, 2021, Pages 581-586]
-
On Device Learning
Concepts, Key Challenges and Open Problems of Federated Learning [Volume 34, Issue 7, 2021, Pages 1667-1683]
-
Open Pit Mines
New Model of Burden Thickness Estimation for Blasting of Open Pit Mines [Volume 34, Issue 5, 2021, Pages 1381-1389]
-
Operational Research
Optimization of Travelling Salesman Problem on Single Valued Triangular Neutrosophic Number using Dhouib-Matrix-TSP1 Heuristic [Volume 34, Issue 12, 2021, Pages 2642-2647]
-
Operational Transconductance Amplifier
Gain Boosted Folded Cascode Op-Amp with Capacitor Coupled Auxiliary Amplifiers [Volume 34, Issue 5, 2021, Pages 1233-1238]
-
Opinion Formation Social Networks Social Impact Model Segregation Agent
Effect of Segregation on Opinion Formation in Scale-Free Social Networks: An Agent-based Approach [Volume 34, Issue 1, 2021, Pages 66-74]
-
Optimal Duty Cycle
A Novel Control Strategy of an Islanded Microgrid Based on Virtual Flux Droop Control and Direct Flux Fuzzy Control [Volume 34, Issue 5, 2021, Pages 1274-1283]
-
Optimised spirally deformed steel fibre
Flexural Performance of Fibre Reinforced Concrete with an Optimised Spirally Deformed Steel Fibre [Volume 34, Issue 6, 2021, Pages 1390-1397]
-
Optimization method
Selective Harmonic Elimination of a Multilevel Voltage Source Inverter Using Whale Optimization Algorithm [Volume 34, Issue 8, 2021, Pages 1898-1904]
-
Optimized Condition
Optimization of Green Technique Develop for Europium (III) Extraction by using Phosphonium Ionic Liquid and Central Composite Design Approach [Volume 34, Issue 2, 2021, Pages 508-516]
-
Oxygen flowrate
Hydroxyapatite Coating on Stainless Steel 316L using Flame Spray Technique [Volume 34, Issue 2, 2021, Pages 493-499]
P
-
PA6/NBR/Clay
Microstructure and mechanical properties of PA6/NBR nanocomposites fabricated by friction stir processing [Volume 34, Issue 10, 2021, Pages 2371-2378]
-
Parameter Uncertainty
A New Recurrent Radial Basis Function Network-based Model Predictive Control for a Power Plant Boiler Temperature Control [Volume 34, Issue 3, 2021, Pages 667-675]
-
Parkinson’s disease
An Improved Modeling of Parkinson’s Tremor and Investigation of Some Approaches to Remove this Symptom [Volume 34, Issue 5, 2021, Pages 1269-1273]
-
Partial Least Squares - Artificial Neural Networks (PLS-ANN)
Effect of motivation, opportunity and ability on human resources information security management considering the roles of Attitudinal, behavioral and organizational factors [Volume 34, Issue 12, 2021, Pages 2624-2635]
-
Particles Swarm Optimization
Objective Functions for the Optimization of an Ultra Wideband Antenna [Volume 34, Issue 7, 2021, Pages 1743-1749]
-
Particle swarm
Improving the Load Balancing and Dynamic Placement of Virtual Machines in Cloud Computing using Particle Swarm Optimization Algorithm [Volume 34, Issue 6, 2021, Pages 1419-1429]
-
Particle Swarm Optimization Algorithm
Novel Particle Swarm Optimization Algorithm Based on President Election: Applied to a Renewable Hybrid Power System Controller [Volume 34, Issue 1, 2021, Pages 97-109]
-
Passivation time
Modeling and Optimization of Charge Materials Ranges in Converter Furnace with Enhanced Passivation Time in Copper Electrorefining Process: A Mixture Design Approach [Volume 34, Issue 4, 2021, Pages 966-975]
-
Percentage of Change in Energy Absorption
Utilizing the Modified Popovics Model in study of effect of water to cement ratio, size and shape of aggregate in concrete behavior [Volume 34, Issue 2, 2021, Pages 393-402]
-
Perforated Composite Panel
Elastic Buckling Response of a Composite Panel Stiffened Around Cutouts [Volume 34, Issue 1, 2021, Pages 243-252]
-
Performance characteristics
Experimental Study on Yttria Stabilized and Titanium Oxide Thermal Barrier Coated Piston Effect on Engine Performance and Emission Characteristics [Volume 34, Issue 12, 2021, Pages 2611-2616]
-
Performance Efficiency
Multi-stage Performance Upgrade of Steel Moment Frames by Post-tension Connections [Volume 34, Issue 5, 2021, Pages 1132-1144]
-
Performance Method
A Novel Model Predictive Voltage Control of Brushless Cascade Doubly-Fed Induction Generator in Stand-Alone Power Generation System [Volume 34, Issue 5, 2021, Pages 1239-1249]
-
Performance Upgrading Factor
Multi-stage Performance Upgrade of Steel Moment Frames by Post-tension Connections [Volume 34, Issue 5, 2021, Pages 1132-1144]
-
Periodic weighting
The Influence of Overburden Structure on Mine Ground Pressure Appearance in Working Face with Super-large Mining Height: a Case Study in Shendong Mining Area [Volume 34, Issue 1, 2021, Pages 283-291]
-
Perishable Goods
A Bi-objective Robust Optimization Model for an Integrated Production-distribution Problem of Perishable Goods with Demand Improvement Strategies: A Case Study [Volume 34, Issue 7, 2021, Pages 1766-1777]
-
Permanent Magnet
Cogging Torque Minimization in Transverse Flux Permanent Magnet Generators using Two-step Axial Permanent Magnet Segmentation for Direct Drive Wind Turbine Application [Volume 34, Issue 4, 2021, Pages 908-918]
-
Permanent Magnet Segmentation
Cogging Torque Minimization in Transverse Flux Permanent Magnet Generators using Two-step Axial Permanent Magnet Segmentation for Direct Drive Wind Turbine Application [Volume 34, Issue 4, 2021, Pages 908-918]
-
Permanent Magnet Shape
Evaluation of Linear Permanent Magnet Vernier Machine Topologies for Wave Energy Converters [Volume 34, Issue 2, 2021, Pages 403-413]
-
Permeability
Investigation of the Influence of Pressures and Proppant Mass on the Well Parameters after Hydraulic Fracturing [Volume 34, Issue 4, 2021, Pages 1066-1073]
-
Perovskite Solar Cells
Design and Analysis of High Efficiency Perovskite Solar Cells with Light Trapping Nano-textured Substrates [Volume 34, Issue 4, 2021, Pages 873-880]
-
Persian handwritten dataset
Holistic Persian Handwritten Word Recognition Using Convolutional Neural Network [Volume 34, Issue 8, 2021, Pages 2028-2037]
-
Persian handwritten word recognition
Holistic Persian Handwritten Word Recognition Using Convolutional Neural Network [Volume 34, Issue 8, 2021, Pages 2028-2037]
-
PFD
Using Universal Nand-nor-inverter Gate to Design D-latch and D Flip-flop in Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 7, 2021, Pages 1710-1717]
-
Phase-Change micro/nano Martials
Towards a Uncertainty Analysis in Thermal Protection using Phase-change Micro/Nano Particles during Hyperthermia [Volume 34, Issue 1, 2021, Pages 263-271]
-
Phase jump
Fast Grid Voltage Synchronization Using Modified FLL in Single-Phase Grid-Connected Power Systems [Volume 34, Issue 6, 2021, Pages 1430-1437]
-
Phase-locked Loop
Fast Grid Voltage Synchronization Using Modified FLL in Single-Phase Grid-Connected Power Systems [Volume 34, Issue 6, 2021, Pages 1430-1437]
-
Phase transformation
Chemical process of synthesizing zinc oxide (ZnO) with nanorod and spherical morphologies [Volume 34, Issue 8, 2021, Pages 1888-1897]
-
PHAST
Risk Assessment of Gasoline Storage Unit of National Iranian Oil Product Distribution Company using PHAST Software [Volume 34, Issue 4, 2021, Pages 763-768]
-
Photoactivity
Synthesis and Characterization of Photocatalytic Activity of Hematite/ Cobalt Oxide/ Graphite Nanocomposites [Volume 34, Issue 1, 2021, Pages 177-183]
-
Photo catalyst
Synthesis and Characterization of Photocatalytic Activity of Hematite/ Cobalt Oxide/ Graphite Nanocomposites [Volume 34, Issue 1, 2021, Pages 177-183]
-
Photovoltaic system
Simulation of Photovoltaic System as a Tool of a State’s Energy Security [Volume 34, Issue 2, 2021, Pages 487-492]
-
Physical Modeling
Physical Modelling of a Strip Footing on a Geosynthetic Reinforced Soil Wall Containing Tire Shred Subjected to Monotonic and Cyclic Loading [Volume 34, Issue 10, 2021, Pages 2266-2279]
-
Piecewise fatigue damage model
A Continuum Damage Mechanics-based Piecewise Fatigue Damage Model for Fatigue Life Prediction of Fiber-Reinforced Laminated Composites [Volume 34, Issue 6, 2021, Pages 1512-1522]
-
Pin geometry
Effect of Pin Geometry and Tool Rotational Speed on Microstructure and Mechanical Properties of Friction Stir Spot Welded Joints in AA2024-O Aluminum Alloy [Volume 34, Issue 8, 2021, Pages 1949-1960]
-
Pin on disc
Dry sliding behavior of carbon-based brake pad materials [Volume 34, Issue 11, 2021, Pages 2517-2524]
-
Pin-type pattern
Numerical analyses of Manufacturing of an AA8111 Pin-shaped Bipolar Plate by Hot Metal Gas Forming [Volume 34, Issue 8, 2021, Pages 1994-2001]
-
Piston
Experimental Study on Yttria Stabilized and Titanium Oxide Thermal Barrier Coated Piston Effect on Engine Performance and Emission Characteristics [Volume 34, Issue 12, 2021, Pages 2611-2616]
-
Placement
Improving the Load Balancing and Dynamic Placement of Virtual Machines in Cloud Computing using Particle Swarm Optimization Algorithm [Volume 34, Issue 6, 2021, Pages 1419-1429]
-
Planned Special Event
Planned Special Event Travel Demand Model Development [Volume 34, Issue 2, 2021, Pages 336-347]
-
Pm machine
Analysis of a New Linear Dual Stator Consequent Pole Halbach Array Flux Reversal Machine [Volume 34, Issue 8, 2021, Pages 2002-2009]
-
Point of common coupling
Power Quality Improvement in Microgrids using STATCOM under Unbalanced Voltage Conditions [Volume 34, Issue 6, 2021, Pages 1455-1467]
-
Pollutant Emissions
Experimental Study of the Effect of a Non-Oxygenated Additive on Spark-Ignition Engine Performance and Pollutant Emissions [Volume 34, Issue 4, 2021, Pages 1035-1045]
-
Polyaniline
Efficient Removal of Copper Ion from Aqueous Solution using Crosslinked Chitosan Grafted with Polyaniline [Volume 34, Issue 2, 2021, Pages 305-312]
-
Poplar
Improved Strength and Stiffness Characteristics of Cross-laminated Poplar Timber Columns [Volume 34, Issue 4, 2021, Pages 803-810]
-
Portal frame
Experimental Study on Single Bay Reinforced Coconut Shell Concrete Portal Frame under Lateral and Cyclic Load [Volume 34, Issue 8, 2021, Pages 1905-1912]
-
Portland Cement
Study of Bonding Strength at Salt-cement Interface During Cementation of Salt Layers [Volume 34, Issue 2, 2021, Pages 581-586]
-
Posttensioned energy dissipating connection
Multi-stage Performance Upgrade of Steel Moment Frames by Post-tension Connections [Volume 34, Issue 5, 2021, Pages 1132-1144]
-
Powder Metallurgy
Utilization of Gene Expression Programming for Modeling of Mechanical Performance of Titanium/Carbonated Hydroxyapatite Nanobiocomposites: The Combination of Artificial Intelligence and Material Science [Volume 34, Issue 4, 2021, Pages 948-955]
-
Power Density
Numerical simulation of a heavy-duty diesel engine to evaluate the effect of fuel injection duration on engine performance and emission [Volume 34, Issue 11, 2021, Pages 2442-2451]
-
Power flow solution
Graph Theoretic Loss Allocation Method for Microgrids having Variable Generation [Volume 34, Issue 9, 2021, Pages 2060-2069]
-
Power Supply Dissipation
Gain Boosted Folded Cascode Op-Amp with Capacitor Coupled Auxiliary Amplifiers [Volume 34, Issue 5, 2021, Pages 1233-1238]
-
Power Transformer Protection
A New Simple Method to Avoid Maloperation of Transformer Restricted Earth Fault Relay during External Fault Events [Volume 34, Issue 9, 2021, Pages 2070-2076]
-
President Election Algorithm
Novel Particle Swarm Optimization Algorithm Based on President Election: Applied to a Renewable Hybrid Power System Controller [Volume 34, Issue 1, 2021, Pages 97-109]
-
Pressure drop
Multi objective optimization of multi-hole orifices using FSI analysis and NSGA II algorithm [Volume 34, Issue 8, 2021, Pages 2038-2044]
-
PRESSURE GRADIENT
Numerical simulation of a heavy-duty diesel engine to evaluate the effect of fuel injection duration on engine performance and emission [Volume 34, Issue 11, 2021, Pages 2442-2451]
-
Principal component analysis
Supervised and Unsupervised Clustering Based Dimensionality Reduction of Hyperspectral Data [Volume 34, Issue 6, 2021, Pages 1407-1412]
-
Prismatic tank
Single-phase and Two-phase Smoothed Particle Hydrodynamics for Sloshing in the Low Filling Ratio of the Prismatic Tank [Volume 34, Issue 5, 2021, Pages 1345-1351]
-
Privacy Preserving Machine Learning
Concepts, Key Challenges and Open Problems of Federated Learning [Volume 34, Issue 7, 2021, Pages 1667-1683]
-
Private Trajectory Intersection Testing
Private Trajectory Intersection Testing: Is Garbled Circuit Better than Custom Protocols? [Volume 34, Issue 4, 2021, Pages 863-872]
-
Probabilistic seismic assessment
Probabilistic Seismic Assessment of Moment Resisting Steel Buildings Considering Soft-story and Torsional Irregularities [Volume 34, Issue 11, 2021, Pages 2476-2493]
-
Processing time variability
Robust and Stable Flow Shop Scheduling Problem under Uncertain Processing Times and Machines’ Disruption [Volume 34, Issue 4, 2021, Pages 935-947]
-
Production scheduling
A joint optimization model for production scheduling and preventive maintenance interval [Volume 34, Issue 11, 2021, Pages 2508-2516]
-
Productivity index
Investigation of the Influence of Pressures and Proppant Mass on the Well Parameters after Hydraulic Fracturing [Volume 34, Issue 4, 2021, Pages 1066-1073]
-
Product life cycle
Assessment the Cost-effectiveness of Information Support for the Business Processes of a Virtual Machine-building Enterprise in the Framework of Industry 4.0 [Volume 34, Issue 1, 2021, Pages 171-176]
-
Prognosis and health management
A Life Clustering Framework for Prognostics of Gas Turbine Engines under Limited Data Situations [Volume 34, Issue 3, 2021, Pages 728-736]
-
Project Risks
System of Comprehensive Assessment of Project Risks in the Energy Industry [Volume 34, Issue 7, 2021, Pages 1778-1784]
-
Prominent camera
Human Action Recognition using Prominent Camera [Volume 34, Issue 2, 2021, Pages 427-432]
-
Propagations Composite
Strength Capacity Cracks Propagations Deflection and Tensile Enhancement of Reinforced Concrete Beams Warped by Glass Fiber Reinforced Polymer Strips [Volume 34, Issue 5, 2021, Pages 1094-1104]
-
Propofol dose
Adpative Neuro-Fuzzy Inference System Estimation Propofol dose in the induction phase during anesthesia; case study [Volume 34, Issue 9, 2021, Pages 2148-2156]
-
Proportional and multi-resonance controller
An Improved Hierarchical Control Structure for Robust Microgrid Operation and Seamless Mode Transfer under Linear and Nonlinear Loads conditions [Volume 34, Issue 9, 2021, Pages 2167-2179]
-
Proportional Integrated
A Novel Model Predictive Voltage Control of Brushless Cascade Doubly-Fed Induction Generator in Stand-Alone Power Generation System [Volume 34, Issue 5, 2021, Pages 1239-1249]
-
Pseudo-second-order
Synergetic photocatalytic and adsorptive removals of metanil yellow using TiO2/grass-derived cellulose/chitosan (TiO2/GC/CH) film composite [Volume 34, Issue 8, 2021, Pages 1827-1836]
-
Pull-In
A new wide tunability MEMS based variable capacitor using two separate electro-static vertical comb drive actuators [Volume 34, Issue 11, 2021, Pages 2534-2544]
-
Pulse Width Modulation
Selective Harmonic Elimination of a Multilevel Voltage Source Inverter Using Whale Optimization Algorithm [Volume 34, Issue 8, 2021, Pages 1898-1904]
-
Pumpkin seed husks
Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
-
Pyrolysis Conditions
Optimization of Thermal Decomposition Conditions of Bone to Achieve the Highest Percentage of Crystalline Phase in Bone Char using Gene Expression Programming and Artificial Neural Network [Volume 34, Issue 1, 2021, Pages 184-194]
Q
-
QCA
Using Universal Nand-nor-inverter Gate to Design D-latch and D Flip-flop in Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 7, 2021, Pages 1710-1717]
-
Quadrotor
Any-time randomized kinodynamic path planning algorithm in dynamic environments with application to quadrotor [Volume 34, Issue 10, 2021, Pages 2360-2370]
-
Quality characteristic
Designing Exponentially Weighted Moving Average Control Charts under Failure Censoring Reliability Tests [Volume 34, Issue 11, 2021, Pages 2398-2407]
-
Quantum Capacitance
A Compact Model of Gate Capacitance in Ballistic Gate-All-Around Carbon Nanotube Field Effect Transistors [Volume 34, Issue 7, 2021, Pages 1718-1724]
-
Quantum-dot Cellular Automata
Designing Bi-directional Counters Using Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 4, 2021, Pages 901-907]
-
Quantum-dot Cellular Automata
Using Universal Nand-nor-inverter Gate to Design D-latch and D Flip-flop in Quantum-dot Cellular Automata Nanotechnology [Volume 34, Issue 7, 2021, Pages 1710-1717]
-
Quantum-dot Cellular Automata
Design of Area Efficient Single Bit Comparator Circuit using Quantum dot Cellular Automata and its Digital Logic Gates Realization [Volume 34, Issue 12, 2021, Pages 2672-2678]
-
Queueing system
Modeling the traffic signal control system at an isolated intersection using queuing systems [Volume 34, Issue 9, 2021, Pages 2077-2086]
R
-
Random forest
A Hybrid Modified Grasshopper Optimization Algorithm and Genetic Algorithm to Detect and Prevent DDoS Attacks [Volume 34, Issue 4, 2021, Pages 811-824]
-
Random Telegraph Noise
Employing the Empirical Mode Decomposition to Denoise the Random Telegraph Noise [Volume 34, Issue 1, 2021, Pages 90-96]
-
Rapidly-exploring Random Trees
Any-time randomized kinodynamic path planning algorithm in dynamic environments with application to quadrotor [Volume 34, Issue 10, 2021, Pages 2360-2370]
-
Rasiq Krishnakumar Algorithm
Fast Color Straight Line Pattern Recognition in an Object Using High Speed Self Learning Devices [Volume 34, Issue 5, 2021, Pages 1225-1232]
-
Rasiq Krishnakumar Device
Fast Color Straight Line Pattern Recognition in an Object Using High Speed Self Learning Devices [Volume 34, Issue 5, 2021, Pages 1225-1232]
-
Ratcheting
Ratcheting Analysis of Steel Plate under Cycling Loading using Dynamic Relaxation Method Experimentally Validated [Volume 34, Issue 6, 2021, Pages 1530-1536]
-
Rational Approximation
Development of a Non-Iterative Macromodeling Technique by Data Integration and Least Square Method [Volume 34, Issue 11, 2021, Pages 2408-2417]
-
RC Column
Experimental Investigations on Strengthened Reinforced Concrete Columns under Monotonic Axial Loading [Volume 34, Issue 5, 2021, Pages 1124-1131]
-
RC columns
Behavior and Strength of Steel Fiber Reinforced Self-compacting Concrete Columns Wrapped by Carbon Fiber Reinforced Polymers Strips [Volume 34, Issue 2, 2021, Pages 382-392]
-
RC deep beam
Experimental Comparison of Different Types of FRP Wrapping in Repairing of RC Deep Beams with Circular Openings [Volume 34, Issue 8, 2021, Pages 1961-1973]
-
RC frame shear wall building
Modified Damage Index Calculation Method for Frame-Shear Wall Building Considering Multiple Demand Parameters [Volume 34, Issue 10, 2021, Pages 2294-2301]
-
Reactive Scheduling
Reactive Scheduling Addressing Unexpected Disturbance in Cellular Manufacturing Systems [Volume 34, Issue 1, 2021, Pages 162-170]
-
Recast Layer Thickness Coating
Influence of Process Parameters on the Microstructural Characteristics and Mechanical Properties of Recast Layer Thickness Coating on Die Steel Machined Surface after Electrical Discharge Machining [Volume 34, Issue 5, 2021, Pages 1297-1304]
-
Reduced graphene Oxide
Electromagnetic Wave Absorption Properties of Barium Ferrite/Reduced Graphene Oxide Nanocomposites [Volume 34, Issue 6, 2021, Pages 1503-1511]
-
Regression Model
Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
-
Regression Model
Straightforward Prediction for Responses of the Concrete Shear Wall Buildings Subject to Ground Motions Using Machine Learning Algorithms [Volume 34, Issue 7, 2021, Pages 1586-1601]
-
Reinforced cement concrete
Experimental Study on Single Bay Reinforced Coconut Shell Concrete Portal Frame under Lateral and Cyclic Load [Volume 34, Issue 8, 2021, Pages 1905-1912]
-
Reinforced concrete beams strengthening
Numerical Study on Flexural Behavior of Concrete Beams Strengthened with Fiber Reinforced Cementitious Matrix Considering Different Concrete Compressive Strength and Steel Reinforcement Ratio [Volume 34, Issue 4, 2021, Pages 793-802]
-
Reinforced Concrete Jacket
Retrofitting of RC Beams using Reinforced Self-compacting Concrete Jackets Containing Aluminum Oxide Nanoparticles [Volume 34, Issue 5, 2021, Pages 1195-1212]
-
Reinforced Concrete Jacket
Strengthening of RC Beams Using SCC Jacket Consisting of Glass Fiber and Fiber-Silica Fume Composite Gel [Volume 34, Issue 8, 2021, Pages 1923-1939]
-
Reinforcement
Elastic Buckling Response of a Composite Panel Stiffened Around Cutouts [Volume 34, Issue 1, 2021, Pages 243-252]
-
Reinforcement corrosion
The Effect of Stochastic Properties of Strength Reduction Function on The Time-Dependent Reliability of RC Structures [Volume 34, Issue 2, 2021, Pages 572-580]
-
Rejuvenation heat treatment
The Rejuvenation Heat Treatment of Nickel Base Superalloy Grade GTD111 after Long-Term Service via the Taguchi Method for Optimization [Volume 34, Issue 4, 2021, Pages 956-965]
-
Relative position
Graph Theoretic Loss Allocation Method for Microgrids having Variable Generation [Volume 34, Issue 9, 2021, Pages 2060-2069]
-
Reliability
A Robust Multi-objective Fuzzy Model for a Green Closed-loop Supply Chain Network under Uncertain Demand and Reliability (A Case Study in Engine Oil Industry) [Volume 34, Issue 12, 2021, Pages 2585-2603]
-
Relief Supply Chain Bi
A Bi-level Programming Approach for Pre-positioning Emergency Warehouses [Volume 34, Issue 1, 2021, Pages 128-139]
-
Remaining useful life estimation
A Life Clustering Framework for Prognostics of Gas Turbine Engines under Limited Data Situations [Volume 34, Issue 3, 2021, Pages 728-736]
-
Removal Efficiency
Efficient Removal of Copper Ion from Aqueous Solution using Crosslinked Chitosan Grafted with Polyaniline [Volume 34, Issue 2, 2021, Pages 305-312]
-
Residual Displacement
Performance of Reinforced Concrete Shear Wall Equipped with an Innovative Hybrid Damper [Volume 34, Issue 7, 2021, Pages 1632-1643]
-
Residual inter-story drift (RIDR)
Effect of intensity measures on the response of a 3D-structure under different ground motion duration [Volume 34, Issue 10, 2021, Pages 2219-2237]
-
Resistance to change
Reactive Scheduling Addressing Unexpected Disturbance in Cellular Manufacturing Systems [Volume 34, Issue 1, 2021, Pages 162-170]
-
Resource Utilization
Energy-aware task scheduling in cloud compting based on discrete pathfinder algorithm [Volume 34, Issue 9, 2021, Pages 2124-2136]
-
Respirational Patients
Numerical modeling and Optimization of Respirational Emergency Drug Delivery Device using Computational Fluid Dynamics and Response Surface Method [Volume 34, Issue 2, 2021, Pages 547-555]
-
Response Surface Methodology
Multi-objective Optimization of HMGF Process Parameters for Manufacturing AA6063 Stepped Tubes using FEM-RSM [Volume 34, Issue 5, 2021, Pages 1305-1312]
-
Response Surface Methodology
Mathematical Modeling & Multi Response Optimization for Improving Machinability of Alloy Steel Using RSM, GRA and Jaya Algorithm [Volume 34, Issue 9, 2021, Pages 2157-2166]
-
Response Surface Methodology
Microstructure and mechanical properties of PA6/NBR nanocomposites fabricated by friction stir processing [Volume 34, Issue 10, 2021, Pages 2371-2378]
-
Response surface methodology (RSM)
Optimization of Calcined Bentonite Clay Utilization in Cement Mortar using Response Surface Methodology [Volume 34, Issue 7, 2021, Pages 1623-1631]
-
Restricted Earth Fault
A New Simple Method to Avoid Maloperation of Transformer Restricted Earth Fault Relay during External Fault Events [Volume 34, Issue 9, 2021, Pages 2070-2076]
-
Rhenium
Exploration of Rhenium Volcanogenic Deposit and Technology of Its Development [Volume 34, Issue 4, 2021, Pages 1052-1065]
-
Rheological properties
Durability and Mechanical Properties of Self-compacting Concretes with Combined Use of Aluminium Oxide Nanoparticles and Glass Fiber [Volume 34, Issue 1, 2021, Pages 26-38]
-
Rheological properties
A neural network approach to estimate non-Newtonian behavior of nanofluid phase change material containing mesoporous silica particles [Volume 34, Issue 8, 2021, Pages 1974-1981]
-
Rib Configuration
Study of Bond Strength of Plain Surface Wave Type Configuration Rebars with Concrete: A Comparative Study [Volume 34, Issue 2, 2021, Pages 326-335]
-
Risk Assessment
Risk Assessment of Gasoline Storage Unit of National Iranian Oil Product Distribution Company using PHAST Software [Volume 34, Issue 4, 2021, Pages 763-768]
-
Risk Assessment
System of Comprehensive Assessment of Project Risks in the Energy Industry [Volume 34, Issue 7, 2021, Pages 1778-1784]
-
Risk-based inspection
Determining the Optimal Maintenance Strategy for Ammonium Hydroxide Production Unit Using Risk-Based Inspection and Analytic Hierarchy Process [Volume 34, Issue 9, 2021, Pages 2087-2096]
-
Road roughness
Effects of Road Roughness, Aerodynamics, and Weather Conditions on Automotive Wheel Force [Volume 34, Issue 2, 2021, Pages 536-546]
-
Robotics
Fused Deposition Modeling of an Aircraft Wing using Industrial Robot with Non-linear Tool Path Generation [Volume 34, Issue 1, 2021, Pages 272-282]
-
Robust fuzzy possibilistic
A Mathematical Model for a Blood Supply Chain Network with the Robust Fuzzy Possibilistic Programming Approach: A Case Study at Namazi Hospital [Volume 34, Issue 6, 2021, Pages 1493-1502]
-
Robust fuzzy programming
A Robust Multi-objective Fuzzy Model for a Green Closed-loop Supply Chain Network under Uncertain Demand and Reliability (A Case Study in Engine Oil Industry) [Volume 34, Issue 12, 2021, Pages 2585-2603]
-
Rotational Cylinder
Magnetohydrodynamic (MHD) Flow in a Channel Including a Rotating Cylinder [Volume 34, Issue 1, 2021, Pages 224-233]
-
Rudbar Earthquake
Earthquake prediction modeling using dynamic changes (Case Study: Alborz Region) [Volume 34, Issue 2, 2021, Pages 355-366]
S
-
S11 Magnitude
Objective Functions for the Optimization of an Ultra Wideband Antenna [Volume 34, Issue 7, 2021, Pages 1743-1749]
-
Salinity
A Preliminary Field Study of Antifouling Paint Perfomance After Short Exposure in Mandara Bali, Indonesia [Volume 34, Issue 4, 2021, Pages 976-986]
-
Scanning electron microscopy
Mechanical Behaviour of Nano-material (Al2O3) Stabilized Soft Soil [Volume 34, Issue 3, 2021, Pages 636-643]
-
Scoop conveyor
Exploration of Rhenium Volcanogenic Deposit and Technology of Its Development [Volume 34, Issue 4, 2021, Pages 1052-1065]
-
Sea wave and wind
Investigating behavior of VLCC ship’s diesel engine on handling stormy waters [Volume 34, Issue 8, 2021, Pages 1845-1855]
-
Secondary Collision
Effects of Deceleration on Secondary Collisions between Adult Occupants and the Vehicle in Frontal Crash Accidents [Volume 34, Issue 12, 2021, Pages 2658-2664]
-
Secondary control
A New Consensus-based Distributed Adaptive Control for Islanded Microgrids [Volume 34, Issue 7, 2021, Pages 1725-1735]
-
Secondary User
Mitigation of Spectrum Sensing Data Falsification Attack in Cognitive Radio Networks using Trust Based Cooperative Sensing [Volume 34, Issue 6, 2021, Pages 1468-1474]
-
Second-order Generalized Integrator
Fast Grid Voltage Synchronization Using Modified FLL in Single-Phase Grid-Connected Power Systems [Volume 34, Issue 6, 2021, Pages 1430-1437]
-
Second-Order Reliability Method
Reliability Analysis of Notched Plates under Anisotropic Damage Based on Uniaxial Loading Using Continuum Damage Mechanics Approach [Volume 34, Issue 1, 2021, Pages 253-262]
-
Security Attacks
Mitigation of Spectrum Sensing Data Falsification Attack in Cognitive Radio Networks using Trust Based Cooperative Sensing [Volume 34, Issue 6, 2021, Pages 1468-1474]
-
Seismic response
Straightforward Prediction for Responses of the Concrete Shear Wall Buildings Subject to Ground Motions Using Machine Learning Algorithms [Volume 34, Issue 7, 2021, Pages 1586-1601]
-
Seismic vulnerability
Seismic Vulnerability Studies of a G+17 storey building in Abu Dhabi - UAE using Fragility Curves [Volume 34, Issue 5, 2021, Pages 1167-1175]
-
Selective harmonic elimination
Selective Harmonic Elimination of a Multilevel Voltage Source Inverter Using Whale Optimization Algorithm [Volume 34, Issue 8, 2021, Pages 1898-1904]
-
Self-checking adder
An Enhanced Self-checking Carry Select Adder Utilizing the Concept of Self-checking Full Adder [Volume 34, Issue 2, 2021, Pages 433-442]
-
Self-Compacted Concrete
Behavior and Strength of Steel Fiber Reinforced Self-compacting Concrete Columns Wrapped by Carbon Fiber Reinforced Polymers Strips [Volume 34, Issue 2, 2021, Pages 382-392]
-
Self-Compacting Concrete
Structural Behavior of Hollow-core One Way Slabs of High Strength Self-compacting Concrete [Volume 34, Issue 1, 2021, Pages 39-45]
-
Self consolidating concrete
Effect of Super absorbent polymer on workability, strength and durability of Self consolidating concrete [Volume 34, Issue 5, 2021, Pages 1118-1123]
-
Self-ompacting Concrete
Durability and Mechanical Properties of Self-compacting Concretes with Combined Use of Aluminium Oxide Nanoparticles and Glass Fiber [Volume 34, Issue 1, 2021, Pages 26-38]
-
Self-organizing Map Network
Provision of an Optimal Strategy to Forecast the Prices Set by the Electricity Market in the Competitive Iranian Energy Market in Fall [Volume 34, Issue 1, 2021, Pages 149-161]
-
Semantic segmentation
Semantic Segmentation of Lesions from Dermoscopic Images using Yolo-DeepLab Networks [Volume 34, Issue 2, 2021, Pages 458-469]
-
Semi-Active Control
The Effects of Mathematical Modelling of Magneto-rheological Dampers on Its Control Performance: A Comparative Study Between the Modified Bouc-Wen and the Maxwell Nonlinear Slider Hysteretic Models [Volume 34, Issue 5, 2021, Pages 1105-1117]
-
Semiconductor
Chemical process of synthesizing zinc oxide (ZnO) with nanorod and spherical morphologies [Volume 34, Issue 8, 2021, Pages 1888-1897]
-
Semi-supervised
A Two-Level Semi-supervised Clustering Technique for News Articles [Volume 34, Issue 12, 2021, Pages 2648-2657]
-
Sensitivity
Effect of Tail Capacitor on Phase Noise in LC Cross-connected Oscillators: An Analytical Investigation [Volume 34, Issue 1, 2021, Pages 110-119]
-
Sensitivity analysis
Multi objective optimization of multi-hole orifices using FSI analysis and NSGA II algorithm [Volume 34, Issue 8, 2021, Pages 2038-2044]
-
Shape memory alloy
Performance of Reinforced Concrete Shear Wall Equipped with an Innovative Hybrid Damper [Volume 34, Issue 7, 2021, Pages 1632-1643]
-
Shearer
Evaluating the Efficiency of Coal Loading Process by Simulating the Process of Loading onto the Face Conveyor with a Shearer with an Additional Share [Volume 34, Issue 7, 2021, Pages 1804-1809]
-
Shearlet Transform
Proposing a New Image Watermarking Method Using Shearlet Transform and Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 843-853]
-
Shear strength
Effect of Pin Geometry and Tool Rotational Speed on Microstructure and Mechanical Properties of Friction Stir Spot Welded Joints in AA2024-O Aluminum Alloy [Volume 34, Issue 8, 2021, Pages 1949-1960]
-
Shear walls
Seismic Vulnerability Studies of a G+17 storey building in Abu Dhabi - UAE using Fragility Curves [Volume 34, Issue 5, 2021, Pages 1167-1175]
-
Shrinking Wall
Analytical Approach of Fe3O4-Ethylene Glycol Radiative Magnetohydrodynamic Nanofluid on Entropy Generation in a Shrinking Wall with Porous Medium [Volume 34, Issue 2, 2021, Pages 517-527]
-
Signal processing
A Signal Processing Method for Text Language Identification [Volume 34, Issue 6, 2021, Pages 1413-1418]
-
Silica fume
Mechanical Properties of Ultra-high Performance Concrete Reinforced by Glass Fibers under Accelerated Aging [Volume 34, Issue 5, 2021, Pages 1074-1084]
-
Silica Nanoparticles
Evaluation of the Combined Use of Waste Paper Sludge Ash and Nanomaterials on Mechanical Properties and Durability of High Strength Concretes [Volume 34, Issue 7, 2021, Pages 1653-1666]
-
Silver
Effect of Silver Clusters Deposition on Wettability and Optical Properties of Diamond-like Carbon Films [Volume 34, Issue 3, 2021, Pages 706-713]
-
Silver, copper: Electrical resistivity
New Application of Electrically Conductive Adhesive as a Transistor-based Electrical Circuit under AC and DC Currents [Volume 34, Issue 8, 2021, Pages 1819-1826]
-
Silver nanoparticle
Spectrophotometric Determination of Naproxen Using Chitosan Capped Silver Nanoparticles in Pharmaceutical Formulation [Volume 34, Issue 7, 2021, Pages 1576-1585]
-
Silver nanoparticles
Experimental Study on Mechanical, Thermal and Antibacterial Properties of Hybrid Nanocomposites of PLA/CNF/Ag [Volume 34, Issue 2, 2021, Pages 500-507]
-
Similarity Graph
Prediction of Drug-Target Protein Interaction Based on the Minimization of Weighted Nuclear Norm and Similarity Graph between Drugs and Target Proteins [Volume 34, Issue 7, 2021, Pages 1736-1742]
-
Simple Additive Weighting Method
Synergetic photocatalytic and adsorptive removals of metanil yellow using TiO2/grass-derived cellulose/chitosan (TiO2/GC/CH) film composite [Volume 34, Issue 8, 2021, Pages 1827-1836]
-
Simulated data
Gear Fault Detection using Machine Learning Techniques- A Simulation-driven Approach [Volume 34, Issue 1, 2021, Pages 212-223]
-
Simulation
Simulation of Photovoltaic System as a Tool of a State’s Energy Security [Volume 34, Issue 2, 2021, Pages 487-492]
-
Simulation
The Effects of BIM Maturity Level on the 4D Simulation Performance: An Empirical Study [Volume 34, Issue 3, 2021, Pages 606-614]
-
Simulation
Investigating the Performance of CO Boiler Burners in the RFCC Unit with CFD Simulation [Volume 34, Issue 3, 2021, Pages 587-597]
-
Simulation modeling
System of Comprehensive Assessment of Project Risks in the Energy Industry [Volume 34, Issue 7, 2021, Pages 1778-1784]
-
Single bay
Experimental Study on Single Bay Reinforced Coconut Shell Concrete Portal Frame under Lateral and Cyclic Load [Volume 34, Issue 8, 2021, Pages 1905-1912]
-
Single-lap Adhesive Joint
Analytical Stress Analysis in Single-lap Adhesive Joints under Buckling [Volume 34, Issue 2, 2021, Pages 313-318]
-
Single stage incremental forming
Experimental and Finite Element Analysis of Single Stage Single Point Incremental Forming [Volume 34, Issue 10, 2021, Pages 2259-2265]
-
SiO2 Mesoporous
Synthesis of Mesoporous Silica Xerogel from Geothermal Sludge using Sulfuric Acid as Gelation Agent [Volume 34, Issue 7, 2021, Pages 1569-1575]
-
Sisal fiber
Waviness Effect of Fiber on Buckling Behavior of Sisal/Carbon Nanotube Reinforced Composites Using Experimental Finite Element Method [Volume 34, Issue 12, 2021, Pages 2617-2623]
-
Size-dependent
Size-dependent Vibration Analysis of Stepped Nanobeams Based on Surface Elasticity Theory [Volume 34, Issue 3, 2021, Pages 744-749]
-
Skin lesion
Semantic Segmentation of Lesions from Dermoscopic Images using Yolo-DeepLab Networks [Volume 34, Issue 2, 2021, Pages 458-469]
-
Skyline Service Dominant Relationship Web Service Service Composition Multi
Services Composition in Multi-cloud Environments using the Skyline Service Algorithm [Volume 34, Issue 1, 2021, Pages 56-65]
-
Sludge disposal Combustible additive
Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
-
SMA tendons
Numerical Investigation of Response of the Post-Tensioned Tapered Steel Beams with Shape Memory Alloy Tendons [Volume 34, Issue 4, 2021, Pages 782-792]
-
Smoothed particle hydrodynamics
Single-phase and Two-phase Smoothed Particle Hydrodynamics for Sloshing in the Low Filling Ratio of the Prismatic Tank [Volume 34, Issue 5, 2021, Pages 1345-1351]
-
Social Conflict
Soft System Methodology: Project vs Local Community Interests in Project Social Conflict [Volume 34, Issue 9, 2021, Pages 2107-2115]
-
Soft soil
Mechanical Behaviour of Nano-material (Al2O3) Stabilized Soft Soil [Volume 34, Issue 3, 2021, Pages 636-643]
-
Soft-story
Probabilistic Seismic Assessment of Moment Resisting Steel Buildings Considering Soft-story and Torsional Irregularities [Volume 34, Issue 11, 2021, Pages 2476-2493]
-
Soft System Methodology
Soft System Methodology: Project vs Local Community Interests in Project Social Conflict [Volume 34, Issue 9, 2021, Pages 2107-2115]
-
Soft Tissue Damage Model
Finite Element Simulation and Experimental Test of Ovine Corneal Tissue Cutting Process in Cataract Surgery Operation [Volume 34, Issue 5, 2021, Pages 1321-1328]
-
Soil Improvement
Large-Scale Experimental Study on Collapsible Soil Improvement Using Encased Stone Columns [Volume 34, Issue 5, 2021, Pages 1145-1155]
-
Solar energy
Simulation of Photovoltaic System as a Tool of a State’s Energy Security [Volume 34, Issue 2, 2021, Pages 487-492]
-
Spark plugs
Experimental Study of the Effect of a Non-Oxygenated Additive on Spark-Ignition Engine Performance and Pollutant Emissions [Volume 34, Issue 4, 2021, Pages 1035-1045]
-
Sparse representation
A General Framework for Estimating Channel of Orthogonal Frequency Division Multiplexing Systems by Utilizing Sparse Representation [Volume 34, Issue 6, 2021, Pages 1475-1485]
-
Specific Charge
New Model of Burden Thickness Estimation for Blasting of Open Pit Mines [Volume 34, Issue 5, 2021, Pages 1381-1389]
-
Spectro-temporal Features
A Clustering-Based Approach for Features Extraction in Spectro-Temporal Domain Using Artificial Neural Network [Volume 34, Issue 2, 2021, Pages 452-457]
-
Spectrum Sensing Data Falsification
Mitigation of Spectrum Sensing Data Falsification Attack in Cognitive Radio Networks using Trust Based Cooperative Sensing [Volume 34, Issue 6, 2021, Pages 1468-1474]
-
Splicing detection
Splicing Image Forgery Detection and Localization Based on Color Edge Inconsistency using Statistical Dispersion Measures [Volume 34, Issue 2, 2021, Pages 443-451]
-
Splitting Tensile Strength
Engineering properties of soil stabilized with cement and fly ash for sustainable road construction [Volume 34, Issue 12, 2021, Pages 2665-2671]
-
Split-Winding Transformer
Multi-Conductor Transmission Line Model of Split-Winding Transformer for Frequency Response and Disk-to-Disk Fault Analysis [Volume 34, Issue 6, 2021, Pages 1486-1492]
-
Square-section cylinder
Numerical Study on Vibration Attenuation of Cylinder using Active Rotary Oscillating Controller [Volume 34, Issue 1, 2021, Pages 202-211]
-
Square Tube
Axial Compression Performance of Square Tube Filled with Foam Aluminum [Volume 34, Issue 5, 2021, Pages 1336-1344]
-
Stability Period
Prolong Stability Period in Node Pairing Protocol for Wireless Sensor Networks [Volume 34, Issue 12, 2021, Pages 2679-2687]
-
Stabilization
Mechanical Behaviour of Nano-material (Al2O3) Stabilized Soft Soil [Volume 34, Issue 3, 2021, Pages 636-643]
-
Stackelberg game
Price and service competition between two leader-follower retailer-Stackelberg supply chains [Volume 34, Issue 8, 2021, Pages 1982-1993]
-
Stainless steel
Influence of Immersion Corrosion on Mechanical Properties of AISI 430/AISI 316L Dissimilar Welded Joints [Volume 34, Issue 5, 2021, Pages 1352-1361]
-
Statcom
Power Quality Improvement in Microgrids using STATCOM under Unbalanced Voltage Conditions [Volume 34, Issue 6, 2021, Pages 1455-1467]
-
Statistical process control
Designing Exponentially Weighted Moving Average Control Charts under Failure Censoring Reliability Tests [Volume 34, Issue 11, 2021, Pages 2398-2407]
-
Statistical Sensitivity Analysis
Statistical Modeling, Optimization and Sensitivity Analysis of Tool’s Geometrical Parameters on Process Force in Automatic Cortical Bone Drilling Process [Volume 34, Issue 2, 2021, Pages 528-535]
-
Steel Fibers
Behavior and Strength of Steel Fiber Reinforced Self-compacting Concrete Columns Wrapped by Carbon Fiber Reinforced Polymers Strips [Volume 34, Issue 2, 2021, Pages 382-392]
-
Steel Jacketing
Experimental Investigations on Strengthened Reinforced Concrete Columns under Monotonic Axial Loading [Volume 34, Issue 5, 2021, Pages 1124-1131]
-
Steel Moment-Resisting Frame
Probabilistic Seismic Assessment of Moment Resisting Steel Buildings Considering Soft-story and Torsional Irregularities [Volume 34, Issue 11, 2021, Pages 2476-2493]
-
Steel steel
FE analysis of single-lap adhesive joints with tapered adherends [Volume 34, Issue 10, 2021, Pages 2213-2218]
-
Steel strap
Experimental Investigations on Strengthened Reinforced Concrete Columns under Monotonic Axial Loading [Volume 34, Issue 5, 2021, Pages 1124-1131]
-
Stepped
Size-dependent Vibration Analysis of Stepped Nanobeams Based on Surface Elasticity Theory [Volume 34, Issue 3, 2021, Pages 744-749]
-
Stiffener
Elastic Buckling Response of a Composite Panel Stiffened Around Cutouts [Volume 34, Issue 1, 2021, Pages 243-252]
-
Stiffness Enhancement
Enhancement of Stiffness in GFRP Beams by Glass Reinforcement [Volume 34, Issue 3, 2021, Pages 615-620]
-
Stiffness of modulus
Engineering properties of soil stabilized with cement and fly ash for sustainable road construction [Volume 34, Issue 12, 2021, Pages 2665-2671]
-
Stochastic model
The Effect of Stochastic Properties of Strength Reduction Function on The Time-Dependent Reliability of RC Structures [Volume 34, Issue 2, 2021, Pages 572-580]
-
Stock Market Big Data Prediction Machine Learning Tree
The Predictability of Tree-based Machine Learning Algorithms in the Big Data Context [Volume 34, Issue 1, 2021, Pages 82-89]
-
Stone columns
Large-Scale Experimental Study on Collapsible Soil Improvement Using Encased Stone Columns [Volume 34, Issue 5, 2021, Pages 1145-1155]
-
Storey Displacement
Effect of Foundation Flexibility on the Seismic Performance of a High-Rise Structure under Far-Field and Near-Field Earthquakes [Volume 34, Issue 7, 2021, Pages 1611-1622]
-
Storey drift
Blast Demand Estimation of RC-Moment-Resisting Frames using a Proposed Multi-modal Adaptive Pushover Analysis Procedure [Volume 34, Issue 1, 2021, Pages 46-55]
-
Strain
Influence of Bi-directional Fibreglass Grid Reinforcement on Drying Shrinkage and Mechanical Properties of Lightweight Foamed Concrete [Volume 34, Issue 1, 2021, Pages 10-18]
-
Strain
The Prediction of Stress and Strain Behaviors in Composite Gears using FEM [Volume 34, Issue 2, 2021, Pages 556-563]
-
Strain
Flexural Strength and Behavioral Study of High-Performance Concrete Beams using Stress-Block Parameters [Volume 34, Issue 11, 2021, Pages 2557-2565]
-
Strain Energy Release Rate (SERR)
Study of the Fracture Behavior under the Effect of Cross-ply and Angle-ply Arrangement of FRP Composite Laminate Subjected to Central Circular Cut-out with Mechanical and Thermal Loading Conditions [Volume 34, Issue 6, 2021, Pages 1523-1529]
-
Strain measurement
Experimental and Finite Element Analysis of Single Stage Single Point Incremental Forming [Volume 34, Issue 10, 2021, Pages 2259-2265]
-
Strength
Improved Strength and Stiffness Characteristics of Cross-laminated Poplar Timber Columns [Volume 34, Issue 4, 2021, Pages 803-810]
-
Strength Capacity
Strength Capacity Cracks Propagations Deflection and Tensile Enhancement of Reinforced Concrete Beams Warped by Glass Fiber Reinforced Polymer Strips [Volume 34, Issue 5, 2021, Pages 1094-1104]
-
Stress
The Prediction of Stress and Strain Behaviors in Composite Gears using FEM [Volume 34, Issue 2, 2021, Pages 556-563]
-
Stress Distribution
Analytical Stress Analysis in Single-lap Adhesive Joints under Buckling [Volume 34, Issue 2, 2021, Pages 313-318]
-
Stress-Strain Test
Utilizing the Modified Popovics Model in study of effect of water to cement ratio, size and shape of aggregate in concrete behavior [Volume 34, Issue 2, 2021, Pages 393-402]
-
Strip footing
Numerical Evaluation of Slope Stability for Construction and Seismic Loads: Case Study [Volume 34, Issue 7, 2021, Pages 1602-1610]
-
Strip footing
Physical Modelling of a Strip Footing on a Geosynthetic Reinforced Soil Wall Containing Tire Shred Subjected to Monotonic and Cyclic Loading [Volume 34, Issue 10, 2021, Pages 2266-2279]
-
Structural elements
Flexural Strength and Behavioral Study of High-Performance Concrete Beams using Stress-Block Parameters [Volume 34, Issue 11, 2021, Pages 2557-2565]
-
Stuck Actuator Faults
Robust Three Stage Central Difference Kalman Filter for Helicopter Unmanned Aerial Vehicle Actuators Fault Estimation [Volume 34, Issue 5, 2021, Pages 1290-1296]
-
Super absorbent polymer
Effect of Super absorbent polymer on workability, strength and durability of Self consolidating concrete [Volume 34, Issue 5, 2021, Pages 1118-1123]
-
Super-elastic Behaviour
Performance of Reinforced Concrete Shear Wall Equipped with an Innovative Hybrid Damper [Volume 34, Issue 7, 2021, Pages 1632-1643]
-
Super-large mining height
The Influence of Overburden Structure on Mine Ground Pressure Appearance in Working Face with Super-large Mining Height: a Case Study in Shendong Mining Area [Volume 34, Issue 1, 2021, Pages 283-291]
-
Superparamagnetic
Towards a Uncertainty Analysis in Thermal Protection using Phase-change Micro/Nano Particles during Hyperthermia [Volume 34, Issue 1, 2021, Pages 263-271]
-
Supersonic
Development of a New Supersonic Rotor-vane Ejector using Computational Fluid Dynamics [Volume 34, Issue 1, 2021, Pages 234-242]
-
Supply chain
Price and service competition between two leader-follower retailer-Stackelberg supply chains [Volume 34, Issue 8, 2021, Pages 1982-1993]
-
Support Vector Machine
Human Action Recognition using Prominent Camera [Volume 34, Issue 2, 2021, Pages 427-432]
-
Surface effect
Size-dependent Vibration Analysis of Stepped Nanobeams Based on Surface Elasticity Theory [Volume 34, Issue 3, 2021, Pages 744-749]
-
Surface roughness
Effect of Cutting Environment and Swept Angle Selection in Milling Operation [Volume 34, Issue 12, 2021, Pages 2578-2584]
-
Surface Wave Type Configuration Rebar
Study of Bond Strength of Plain Surface Wave Type Configuration Rebars with Concrete: A Comparative Study [Volume 34, Issue 2, 2021, Pages 326-335]
-
Survey Methodology
Planned Special Event Travel Demand Model Development [Volume 34, Issue 2, 2021, Pages 336-347]
-
Sustainable material
Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method [Volume 34, Issue 10, 2021, Pages 2351-2359]
-
Sustainable mining
Development of open-pit mine reclamation cost estimation models: A regression-based approach [Volume 34, Issue 11, 2021, Pages 2467-2475]
-
Synthesis
Synthesis and Characterization of Photocatalytic Activity of Hematite/ Cobalt Oxide/ Graphite Nanocomposites [Volume 34, Issue 1, 2021, Pages 177-183]
-
Synthesis of carbon nanotubes
Mass Production and Growth Mechanism of Carbon Nanotubes in Optimized Mechanothermal Method [Volume 34, Issue 10, 2021, Pages 2332-2340]
T
-
Taguchi
Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V [Volume 34, Issue 4, 2021, Pages 928-934]
-
Taguchi approach
Study of Friction Stir Spot Welding of Aluminum/Copper Dissimilar Sheets using Taguchi Approach [Volume 34, Issue 5, 2021, Pages 1329-1135]
-
Taguchi method
Cogging Torque Minimization in Transverse Flux Permanent Magnet Generators using Two-step Axial Permanent Magnet Segmentation for Direct Drive Wind Turbine Application [Volume 34, Issue 4, 2021, Pages 908-918]
-
Taguchi method
Parametric Effects on Slump and Compressive Strength Properties of Geopolymer Concrete using Taguchi Method [Volume 34, Issue 3, 2021, Pages 629-635]
-
Taguchi method
The Rejuvenation Heat Treatment of Nickel Base Superalloy Grade GTD111 after Long-Term Service via the Taguchi Method for Optimization [Volume 34, Issue 4, 2021, Pages 956-965]
-
Taguchi method
Multi-objective optimization design and Verification of Interior PMSG Based on Finite Element Analysis and Taguchi method [Volume 34, Issue 9, 2021, Pages 2097-2106]
-
Taguchi method
Influence of Various Design Parameters on Compressive Strength of Geopolymer Concrete: A Parametric study by Taguchi Method [Volume 34, Issue 10, 2021, Pages 2351-2359]
-
Taguchi method
Taguchi- Grey relational analysis for Optimizing the Compressive Strength and Porosity of Metakaolin-Based Geopolymer [Volume 34, Issue 11, 2021, Pages 2525-2533]
-
Taguchi Optimization Method
Design and Modeling of a High-Speed Permanent Magnet Synchronous Generator with a Retention Sleeve of Rotor [Volume 34, Issue 11, 2021, Pages 2433-2441]
-
Taleghan Dam
Optimization of Dam Reservoir Operation Using Grey Wolf Optimization and Genetic Algorithms (A Case Study of Taleghan Dam) [Volume 34, Issue 7, 2021, Pages 1644-1652]
-
Tall Buildings
Straightforward Prediction for Responses of the Concrete Shear Wall Buildings Subject to Ground Motions Using Machine Learning Algorithms [Volume 34, Issue 7, 2021, Pages 1586-1601]
-
Tapered steel beams
Numerical Investigation of Response of the Post-Tensioned Tapered Steel Beams with Shape Memory Alloy Tendons [Volume 34, Issue 4, 2021, Pages 782-792]
-
TCP/IP networks
Bandwidth Management with Congestion Control Approach and Fuzzy Logic [Volume 34, Issue 4, 2021, Pages 891-900]
-
Temporal stationary
A Novel Method for Forecasting Surface Wind Speed using Wind-direction based on Hierarchical Markov Model [Volume 34, Issue 2, 2021, Pages 414-426]
-
Tensile load
FE analysis of single-lap adhesive joints with tapered adherends [Volume 34, Issue 10, 2021, Pages 2213-2218]
-
Tensile test
Influence of Immersion Corrosion on Mechanical Properties of AISI 430/AISI 316L Dissimilar Welded Joints [Volume 34, Issue 5, 2021, Pages 1352-1361]
-
Ternary composite
Synthesis and Characterization of TiO2/CuO/WO3 Ternary Composite and its Application as Photocatalyst [Volume 34, Issue 3, 2021, Pages 721-727]
-
Terrazyme
An Experimental Investigation on Black Cotton Soil using Terrazyme [Volume 34, Issue 8, 2021, Pages 1837-1844]
-
Textile Fabric
Influence of Bi-directional Fibreglass Grid Reinforcement on Drying Shrinkage and Mechanical Properties of Lightweight Foamed Concrete [Volume 34, Issue 1, 2021, Pages 10-18]
-
Thermal decomposition
Chemical process of synthesizing zinc oxide (ZnO) with nanorod and spherical morphologies [Volume 34, Issue 8, 2021, Pages 1888-1897]
-
Thermal efficiency factor
Experimental Investigation on the Effect a Rotational Shaft on the Thermal Behavior of a Circular Tube under Constant Heat Flux [Volume 34, Issue 4, 2021, Pages 1008-1015]
-
Thermal-fluid Characteristic
Numerical Investigation of the Heat-Fluid Characteristic inside High-Speed Angular Contact Ball Bearing Lubricated with Grease [Volume 34, Issue 5, 2021, Pages 1313-1320]
-
Thermal loading
Study of the Fracture Behavior under the Effect of Cross-ply and Angle-ply Arrangement of FRP Composite Laminate Subjected to Central Circular Cut-out with Mechanical and Thermal Loading Conditions [Volume 34, Issue 6, 2021, Pages 1523-1529]
-
Thermal Modeling
Analytical Evaluation of Core Losses, Thermal Modelling and Insulation Lifespan Prediction for Induction Motor in Presence of Harmonic and Voltage Unbalance [Volume 34, Issue 5, 2021, Pages 1213-1224]
-
Thermal Performance
Sensitivity Analysis on Thermal Performance of Gas Heater with Finned and Finless Tubes using Characteristics-based Method [Volume 34, Issue 6, 2021, Pages 1537-1544]
-
Thermo-phoretic
The application of analytical methods in the investigation effects of Magnetic parameter and Brownian motion on the fluid flow between two equal plates [Volume 34, Issue 10, 2021, Pages 2341-2350]
-
Thermo-piezoelectric
Non-linear forced vibration analysis of piezoelectric functionally graded beams in thermal environment. [Volume 34, Issue 11, 2021, Pages 2387-2397]
-
ThingSpeak
Operating Wheelchair Using Flex Sensor [Volume 34, Issue 7, 2021, Pages 1703-1709]
-
Three Dimensional Printing
Fused Deposition Modeling of an Aircraft Wing using Industrial Robot with Non-linear Tool Path Generation [Volume 34, Issue 1, 2021, Pages 272-282]
-
Throughput
Energy-aware task scheduling in cloud compting based on discrete pathfinder algorithm [Volume 34, Issue 9, 2021, Pages 2124-2136]
-
Throughput
Prolong Stability Period in Node Pairing Protocol for Wireless Sensor Networks [Volume 34, Issue 12, 2021, Pages 2679-2687]
-
Ti/CHA nanocomposite
Utilization of Gene Expression Programming for Modeling of Mechanical Performance of Titanium/Carbonated Hydroxyapatite Nanobiocomposites: The Combination of Artificial Intelligence and Material Science [Volume 34, Issue 4, 2021, Pages 948-955]
-
Tidal Energy Conversion System
An Improvement on Slot Configuration Structure of a Low-Speed Surface-Mounted Permanent Magnet Synchronous Generator with a Wound Cable Winding [Volume 34, Issue 9, 2021, Pages 2045-2052]
-
Time-Dependent reliability
The Effect of Stochastic Properties of Strength Reduction Function on The Time-Dependent Reliability of RC Structures [Volume 34, Issue 2, 2021, Pages 572-580]
-
TiO2/CuO
Synthesis and Characterization of TiO2/CuO/WO3 Ternary Composite and its Application as Photocatalyst [Volume 34, Issue 3, 2021, Pages 721-727]
-
TiO2/CuO/WO3
Synthesis and Characterization of TiO2/CuO/WO3 Ternary Composite and its Application as Photocatalyst [Volume 34, Issue 3, 2021, Pages 721-727]
-
Titanium dioxide
Photo-degradation of P-Nitro Toluene Using Modified Bentonite Based Nano-TiO2 Photocatalyst in Aqueous Solution [Volume 34, Issue 4, 2021, Pages 756-762]
-
Titanium Dioxide Nanoubes
Titanium Dioxide Nanotubes Incorporated Bioactive Glass Nanocomposites: Synthesis, Characterization, Bioactivity Evaluation and Drug Loading [Volume 34, Issue 1, 2021, Pages 1-9]
-
Titanium sleeve
Design and Modeling of a High-Speed Permanent Magnet Synchronous Generator with a Retention Sleeve of Rotor [Volume 34, Issue 11, 2021, Pages 2433-2441]
-
Toluene
Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
-
Toolpath generation
Fused Deposition Modeling of an Aircraft Wing using Industrial Robot with Non-linear Tool Path Generation [Volume 34, Issue 1, 2021, Pages 272-282]
-
Tool Rotational Speed
Effect of Pin Geometry and Tool Rotational Speed on Microstructure and Mechanical Properties of Friction Stir Spot Welded Joints in AA2024-O Aluminum Alloy [Volume 34, Issue 8, 2021, Pages 1949-1960]
-
Tool Wear
Effect of Cutting Environment and Swept Angle Selection in Milling Operation [Volume 34, Issue 12, 2021, Pages 2578-2584]
-
Torque Ripple
Design Procedure of an Outer Rotor Synchronous Reluctance Machine for Scooter Application [Volume 34, Issue 3, 2021, Pages 656-666]
-
Torque Ripple
An Improvement on Slot Configuration Structure of a Low-Speed Surface-Mounted Permanent Magnet Synchronous Generator with a Wound Cable Winding [Volume 34, Issue 9, 2021, Pages 2045-2052]
-
Torsional Irregularity
Probabilistic Seismic Assessment of Moment Resisting Steel Buildings Considering Soft-story and Torsional Irregularities [Volume 34, Issue 11, 2021, Pages 2476-2493]
-
Total harmonic distortion
Dual Output Voltage Differencing Buffered Amplifier Based Active -C Multiphase Sinusoidal Oscillator [Volume 34, Issue 6, 2021, Pages 1438-1444]
-
Tractor Semi-Trailer
Experimental Analysis for Determination of Longitudinal Friction Coefficient Function in Braking Tractor Semi-trailer [Volume 34, Issue 7, 2021, Pages 1799-1803]
-
Traditional 4-step model
Planned Special Event Travel Demand Model Development [Volume 34, Issue 2, 2021, Pages 336-347]
-
Traffic signal timing
Modeling the traffic signal control system at an isolated intersection using queuing systems [Volume 34, Issue 9, 2021, Pages 2077-2086]
-
Transfer learning
Deep Convolutional Neural Network for Finger-Knuckle-Print Recognition [Volume 34, Issue 7, 2021, Pages 1684-1693]
-
Transfer learning
Holistic Persian Handwritten Word Recognition Using Convolutional Neural Network [Volume 34, Issue 8, 2021, Pages 2028-2037]
-
Transistor circuit
New Application of Electrically Conductive Adhesive as a Transistor-based Electrical Circuit under AC and DC Currents [Volume 34, Issue 8, 2021, Pages 1819-1826]
-
Transverse Flux Machine
Cogging Torque Minimization in Transverse Flux Permanent Magnet Generators using Two-step Axial Permanent Magnet Segmentation for Direct Drive Wind Turbine Application [Volume 34, Issue 4, 2021, Pages 908-918]
-
Travel Demand Analysis
Planned Special Event Travel Demand Model Development [Volume 34, Issue 2, 2021, Pages 336-347]
-
Tremor removing
An Improved Modeling of Parkinson’s Tremor and Investigation of Some Approaches to Remove this Symptom [Volume 34, Issue 5, 2021, Pages 1269-1273]
-
Tribology
Influence of Mould Thickness on Microstructure, Hardness and Wear of AL-Cu Cast Alloys [Volume 34, Issue 8, 2021, Pages 2021-2027]
-
Tri gram
A Hidden Markov Model for Morphology of Compound Roles in Persian Text Part of Tagging [Volume 34, Issue 11, 2021, Pages 2494-2507]
-
Tungsten Inert Gas
Experimental Investigation of TIG Welding Input Parameters Effects on Mechanical Characteristics [Volume 34, Issue 2, 2021, Pages 564-571]
-
Tunneling
A Numerical Study of the Effect of Tunneling on Surface Settlement and Existing Buildings [Volume 34, Issue 5, 2021, Pages 1085-1093]
-
Turbocharger
Numerical/Experimental Study on Downsized Iranian National Engine (EF7) Performance at Low Engine Speeds [Volume 34, Issue 9, 2021, Pages 2137-2147]
-
Two-level clustering
A Two-Level Semi-supervised Clustering Technique for News Articles [Volume 34, Issue 12, 2021, Pages 2648-2657]
-
Two machine flow shop system
Robust and Stable Flow Shop Scheduling Problem under Uncertain Processing Times and Machines’ Disruption [Volume 34, Issue 4, 2021, Pages 935-947]
-
Two phase flow
The application of analytical methods in the investigation effects of Magnetic parameter and Brownian motion on the fluid flow between two equal plates [Volume 34, Issue 10, 2021, Pages 2341-2350]
-
Type-1 Fuzzy (T1F)
Memristor Crossbar-Based Hardware Implementation of Type-2 Fuzzy Membership Function and On-Chip Learning [Volume 34, Issue 9, 2021, Pages 2180-2188]
-
Type-2 Fuzzy (T2F)
Memristor Crossbar-Based Hardware Implementation of Type-2 Fuzzy Membership Function and On-Chip Learning [Volume 34, Issue 9, 2021, Pages 2180-2188]
U
-
UCS
Engineering properties of soil stabilized with cement and fly ash for sustainable road construction [Volume 34, Issue 12, 2021, Pages 2665-2671]
-
UHPC Reinforced by Glass Fibers
Mechanical Properties of Ultra-high Performance Concrete Reinforced by Glass Fibers under Accelerated Aging [Volume 34, Issue 5, 2021, Pages 1074-1084]
-
UiO-66-NH2
Fabrication and evaluation of controlled release of Doxorubicin loaded UiO-66-NH2 metal organic frameworks [Volume 34, Issue 8, 2021, Pages 1874-1881]
-
Ultimate Tensile Strength
Direct Drive Friction Welding Joint Strength of AISI 304 [Volume 34, Issue 3, 2021, Pages 714-720]
-
Ultra-fine slag
Influence of Chemical Admixtures on Geotechnical Properties of Expansive Soil [Volume 34, Issue 1, 2021, Pages 19-25]
-
Ultraviolent
Photocatalytic removal of toluene from gas stream using chitosan/AgI-ZnO Nanocomposite fixed on glass bed under UVA irradiation [Volume 34, Issue 3, 2021, Pages 598-605]
-
Uncertainty
A Mathematical Model for a Blood Supply Chain Network with the Robust Fuzzy Possibilistic Programming Approach: A Case Study at Namazi Hospital [Volume 34, Issue 6, 2021, Pages 1493-1502]
-
Uncertainty analysis
Towards a Uncertainty Analysis in Thermal Protection using Phase-change Micro/Nano Particles during Hyperthermia [Volume 34, Issue 1, 2021, Pages 263-271]
-
Unconfined compressive strength
Influence of Chemical Admixtures on Geotechnical Properties of Expansive Soil [Volume 34, Issue 1, 2021, Pages 19-25]
-
Unconfined compressive strength
Mechanical Behaviour of Nano-material (Al2O3) Stabilized Soft Soil [Volume 34, Issue 3, 2021, Pages 636-643]
-
Unconfined compressive strength
An Experimental Investigation on Black Cotton Soil using Terrazyme [Volume 34, Issue 8, 2021, Pages 1837-1844]
-
Underreamed piles
Analysis of Under-Reamed Piles Subjected to Different Types of Load in Clayey Soil [Volume 34, Issue 8, 2021, Pages 1940-1948]
-
Unified Theory of Acceptance and Use Technology (UTAUT)
Effect of motivation, opportunity and ability on human resources information security management considering the roles of Attitudinal, behavioral and organizational factors [Volume 34, Issue 12, 2021, Pages 2624-2635]
-
Unknown Input Observer
Actuator Fault Detection and Isolation for Helicopter Unmanned Arial Vehicle in the Present of Disturbance [Volume 34, Issue 3, 2021, Pages 676-681]
-
Urban Traffic
Improvement of Multi-agent Routing Guidance with an Intelligent Traffic Light Scheduling and the Ability to Select Intermediate Destinations [Volume 34, Issue 4, 2021, Pages 854-862]
-
UV- vis spectrophotometric determination
Spectrophotometric Determination of Naproxen Using Chitosan Capped Silver Nanoparticles in Pharmaceutical Formulation [Volume 34, Issue 7, 2021, Pages 1576-1585]
V
-
Variable generation
Graph Theoretic Loss Allocation Method for Microgrids having Variable Generation [Volume 34, Issue 9, 2021, Pages 2060-2069]
-
Variation Coefficient
Utilizing the Modified Popovics Model in study of effect of water to cement ratio, size and shape of aggregate in concrete behavior [Volume 34, Issue 2, 2021, Pages 393-402]
-
Vegetable based oil cutting fluids
Mathematical Modeling & Multi Response Optimization for Improving Machinability of Alloy Steel Using RSM, GRA and Jaya Algorithm [Volume 34, Issue 9, 2021, Pages 2157-2166]
-
Vehicle Dynamics
Experimental Analysis for Determination of Longitudinal Friction Coefficient Function in Braking Tractor Semi-trailer [Volume 34, Issue 7, 2021, Pages 1799-1803]
-
Vernier Machine
Evaluation of Linear Permanent Magnet Vernier Machine Topologies for Wave Energy Converters [Volume 34, Issue 2, 2021, Pages 403-413]
-
Very Large Crude Oil Carrier
Investigating behavior of VLCC ship’s diesel engine on handling stormy waters [Volume 34, Issue 8, 2021, Pages 1845-1855]
-
Vibration Analysis
Gear Fault Detection using Machine Learning Techniques- A Simulation-driven Approach [Volume 34, Issue 1, 2021, Pages 212-223]
-
VIKOR
An Application of Fuzzy-VIKOR Method in Environmental Impact Assessment of the Boog Mine Southeast of Iran [Volume 34, Issue 6, 2021, Pages 1545-1556]
-
Virtual Crack Closure Technique (VCCT)
Study of the Fracture Behavior under the Effect of Cross-ply and Angle-ply Arrangement of FRP Composite Laminate Subjected to Central Circular Cut-out with Mechanical and Thermal Loading Conditions [Volume 34, Issue 6, 2021, Pages 1523-1529]
-
Virtual Flux Droop Control
A Novel Control Strategy of an Islanded Microgrid Based on Virtual Flux Droop Control and Direct Flux Fuzzy Control [Volume 34, Issue 5, 2021, Pages 1274-1283]
-
Virtual machine-building enterprise
Assessment the Cost-effectiveness of Information Support for the Business Processes of a Virtual Machine-building Enterprise in the Framework of Industry 4.0 [Volume 34, Issue 1, 2021, Pages 171-176]
-
Virtual Reality
Semi-Augmented Reality, a Novel Approach to Improve Customer Safety in the Pre-sale Process of Under Construction Buildings [Volume 34, Issue 10, 2021, Pages 2198-2205]
-
Viscous
Development of a New Supersonic Rotor-vane Ejector using Computational Fluid Dynamics [Volume 34, Issue 1, 2021, Pages 234-242]
-
Volcanic breccia
Kudryavy Volcano Crater Thick Rocks Electrical Breakdown Study in 50 Hz Electromagnetic Field [Volume 34, Issue 5, 2021, Pages 1371-1380]
-
Volcanic deposit
Kudryavy Volcano Crater Thick Rocks Electrical Breakdown Study in 50 Hz Electromagnetic Field [Volume 34, Issue 5, 2021, Pages 1371-1380]
-
Volcanogenic deposit
Exploration of Rhenium Volcanogenic Deposit and Technology of Its Development [Volume 34, Issue 4, 2021, Pages 1052-1065]
-
Voltage Regulator
Voltage Stability Improvement in Optimal Placement of Voltage Regulators and Capacitor Banks Based on FSM and MMOPSO Approach [Volume 34, Issue 4, 2021, Pages 881-890]
-
Voltage Stability Enhancement
Voltage Stability Improvement in Optimal Placement of Voltage Regulators and Capacitor Banks Based on FSM and MMOPSO Approach [Volume 34, Issue 4, 2021, Pages 881-890]
-
Voltage Unbalance
Power Quality Improvement in Microgrids using STATCOM under Unbalanced Voltage Conditions [Volume 34, Issue 6, 2021, Pages 1455-1467]
-
Vortex-induced vibration
Numerical Study on Vibration Attenuation of Cylinder using Active Rotary Oscillating Controller [Volume 34, Issue 1, 2021, Pages 202-211]
W
-
Wall angle
Experimental and Finite Element Analysis of Single Stage Single Point Incremental Forming [Volume 34, Issue 10, 2021, Pages 2259-2265]
-
Waste paper sludge ash
Evaluation of the Combined Use of Waste Paper Sludge Ash and Nanomaterials on Mechanical Properties and Durability of High Strength Concretes [Volume 34, Issue 7, 2021, Pages 1653-1666]
-
Waste sorption material
Application of Sorbent Waste Material for Porous Ceramics Production [Volume 34, Issue 3, 2021, Pages 621-628]
-
Water-retention
Soil Shrinkage Characterization of Low Plasticity Soil Using Digital Image Analysis Process [Volume 34, Issue 10, 2021, Pages 2206-2212]
-
Wavelet Energy
Epileptic Electroencephalogram Classification using Relative Wavelet Sub-Band Energy and Wavelet Entropy [Volume 34, Issue 1, 2021, Pages 75-81]
-
Wavelet Packet Transform
A Signal Processing Method for Text Language Identification [Volume 34, Issue 6, 2021, Pages 1413-1418]
-
WEAP software
Optimization of Dam Reservoir Operation Using Grey Wolf Optimization and Genetic Algorithms (A Case Study of Taleghan Dam) [Volume 34, Issue 7, 2021, Pages 1644-1652]
-
Wear
Dry sliding behavior of carbon-based brake pad materials [Volume 34, Issue 11, 2021, Pages 2517-2524]
-
Weather forecasting
A Novel Method for Forecasting Surface Wind Speed using Wind-direction based on Hierarchical Markov Model [Volume 34, Issue 2, 2021, Pages 414-426]
-
Weighted Mean
Supervised and Unsupervised Clustering Based Dimensionality Reduction of Hyperspectral Data [Volume 34, Issue 6, 2021, Pages 1407-1412]
-
Weighted sparse
A General Framework for Estimating Channel of Orthogonal Frequency Division Multiplexing Systems by Utilizing Sparse Representation [Volume 34, Issue 6, 2021, Pages 1475-1485]
-
Welding robot
A study on the modified algorithm for image processing in Tracking Seam Welding [Volume 34, Issue 8, 2021, Pages 1913-1922]
-
Whale Optimization Algorithm
Presenting a New Method for Earthquake Relief Center Location Allocation based on Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 769-781]
-
Whale Optimization Algorithm
Location Allocation of Earthquake Relief Centers in Yazd City Based on Whale Optimization Algorithm [Volume 34, Issue 5, 2021, Pages 1184-1194]
-
Whale Optimization Algorithm
Selective Harmonic Elimination of a Multilevel Voltage Source Inverter Using Whale Optimization Algorithm [Volume 34, Issue 8, 2021, Pages 1898-1904]
-
Wheel force
Effects of Road Roughness, Aerodynamics, and Weather Conditions on Automotive Wheel Force [Volume 34, Issue 2, 2021, Pages 536-546]
-
Wind regime
A Novel Method for Forecasting Surface Wind Speed using Wind-direction based on Hierarchical Markov Model [Volume 34, Issue 2, 2021, Pages 414-426]
-
Wind Turbine
Cogging Torque Minimization in Transverse Flux Permanent Magnet Generators using Two-step Axial Permanent Magnet Segmentation for Direct Drive Wind Turbine Application [Volume 34, Issue 4, 2021, Pages 908-918]
-
WOA Algorithm
Proposing a New Image Watermarking Method Using Shearlet Transform and Whale Optimization Algorithm [Volume 34, Issue 4, 2021, Pages 843-853]
-
Workability
Optimization of Calcined Bentonite Clay Utilization in Cement Mortar using Response Surface Methodology [Volume 34, Issue 7, 2021, Pages 1623-1631]
-
WSN
Prolong Stability Period in Node Pairing Protocol for Wireless Sensor Networks [Volume 34, Issue 12, 2021, Pages 2679-2687]
X
-
XLPE
An Improvement on Slot Configuration Structure of a Low-Speed Surface-Mounted Permanent Magnet Synchronous Generator with a Wound Cable Winding [Volume 34, Issue 9, 2021, Pages 2045-2052]
Y
-
Yolov3
Semantic Segmentation of Lesions from Dermoscopic Images using Yolo-DeepLab Networks [Volume 34, Issue 2, 2021, Pages 458-469]
Z
-
Zarrouk
Nitrogen Starvation Effect Versus its Excess on the Performance of Arthrospira maxima in Zarrouk’s Medium [Volume 34, Issue 7, 2021, Pages 1557-1568]
-
Zernike Moments
Improved Object Matching in Multi-Objects Tracking Based On Zernike Moments and Combination of Multiple Similarity Metrics [Volume 34, Issue 6, 2021, Pages 1445-1454]
-
Zinc oxide
Chemical process of synthesizing zinc oxide (ZnO) with nanorod and spherical morphologies [Volume 34, Issue 8, 2021, Pages 1888-1897]
Your query does not match with any item